Advertisement
Code Retrieval
Once you've programmed the remote to control your devices,
you may want to record the codes for future reference. If you
used the Direct Code Entry method, this is easy. Just fi nd
the codes you entered and make a note of them in the boxes
below. If you used one of the Code Search methods to program
your remote or if you used the Direct Entry method but don't
remember the code, you will need to retrieve each device's
fi ve-digit
code. Retrieving the actual code and writing it down
will save you time if you ever need to program the remote
again. If the codes are recorded, you can use the Direct Entry
method to reprogram your remote to control your devices,
which is quick and easy.
Indicator
light
1.
Press and hold the device key
(TV, SAT•CBL•STRM, DVD,
AUDIO, VCR•AUX2, DVR•AUX1)
whose code you wish to retrieve.
The indicator light turns on.
Keep pressing the device key.
2.
While holding the device key down, press and hold the
INFO•OPTIONS
key. The indicator light turns off. After
holding down both keys for three seconds, the light turns
back on.
3.
Release both keys. The indicator light remains on.
4.
Starting with the number 1 key, press and release each
number key on the keypad in the following order: 1-9, then
0. The number that causes the indicator light to blink is the
fi rst number of the code. As you fi nd each number of the
code, write it down for future reference. Then start with the
number 1 key again.
Note: All TV codes start with the number 1; all VCR and
DVR codes start with the number 2; all DVD players codes,
the number 3; all audio device codes, the number 4; and all
satellite receivers, cable boxes, streaming players, and digital
TV converters, the number 5.
5.
Repeat step 4 until you have retrieved all fi ve numbers in
the code. After the fi fth number is retrieved, the indicator
light blinks briefl y, then turns off.
TIP: To exit the Code Retrieval Mode at any time, press the
CLEAR key.
Note: If you press an invalid key during the Code Retrieval
process, the remote will not respond. If you do not press a
valid Code Retrieval key (TV, SAT•CBL•STRM, DVR•AUX1,
AUDIO, VCR•AUX2, INFO•OPTIONS, CLEAR), Code Retrieval
times out after 15 seconds. The indicator light blinks four
times, and then turns off.
TV CODE
SAT•CBL•STRM CODE
1
5
SAT
DVD CODE
DVR•AUX1 CODE
3
DVR/VCR
AUDIO CODE
VCR•AUX2 CODE
4
DVR/VCR
Troubleshooting
Problem: The remote does not operate your device.
•
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
AUDIO, VCR•AUX2). This tells the remote which device to
operate.
•
Remove any obstacles between the remote and the device. Make
sure you're aiming the remote at the device's IR sensor.
•
Make sure the batteries are fresh and are properly installed.
Replace the batteries with two new AAA batteries, if necessary
(see the Battery Installation section).
Problem: The remote can't be programmed to operate your
device.
•
If you are testing the remote while programming it, you may be
too far away from the device or at a wrong angle. There must be
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at the
device you're trying to control.
•
If you're using the Direct Entry programming method to enter
the codes for your brand and the unit is still not functioning
properly, try the auto, brand, or manual search method.
•
To control combo units, like TV/VCRs or TV/DVDs, you must
program the individual corresponding device keys to control
each part of the combo unit. Once programmed successfully, the
TV key controls the TV functions, and the DVD or VCR•AUX2 key
controls the DVD or VCR functions.
•
Make sure the batteries are fresh and are properly installed.
Problem: The remote doesn't perform commands properly.
•
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
AUDIO, VCR•AUX2). This tells the remote which device to
operate.
•
Make sure device is ready (for example, the DVD player has a
disc loaded).
•
You may have pressed an invalid key for the mode the remote is in.
•
If you're trying to enter a channel number directly, try pressing
the ENTER key after entering the channel number as this is a
requirement of certain models and brands.
•
There is a possibility that a programmed code may only be
able to control some of your device features (for example, only
turns a device on and off). To confi rm that the device key is
programmed with the correct code for maximum functionality,
test the device. Attempt to control a variety of the device's
functions with the remote. If some of the features of your
devices don't work, try programming the remote with a different
code in the list using the Direct Code Entry Method, until you
fi nd the code that allows the remote to control the majority of
your device's functions. Different codes can provide different
levels of functionality.
Problem: The indicator light does not come on when you press
a key.
•
You may have pressed an invalid key for the mode the remote is
in.
•
Make sure the remote is in the correct mode by pressing the
STREAMING
CABLE
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
AUDIO, VCR•AUX2). This tells the remote which device to
operate.
•
Make sure the batteries are fresh and are properly installed.
Replace the batteries with two new AAA batteries, if necessary
(see the Battery Installation section).
Problem: The remote will not change channels on device.
DVD
TV
SAT•CBL•STRM
•
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
AUDIO, VCR•AUX2). This tells the remote which device to
operate.
•
Press the ENTER key after you enter a channel number.
•
Remove any obstacles between the remote and the device. Make
sure to aim the remote at the IR sensor on the device.
DVD
TV
SAT•CBL•STRM
Problem: The device's menu does not appear on the TV screen.
•
Make sure you have connected the device to your TV properly and
selected the correct input. (See your devices' Owner's Manuals for
proper connection procedures.)
•
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STRM, DVD, DVR•AUX1,
AUDIO, VCR•AUX2). This tells the remote which device to
operate.
•
Menu access isn't supported for all brands. You may need to use
your original remote control to access menu functions for some
devices.
For more information, please visit
www.rcaaudiovideo.com
Consumer Help Line: 1-800-420-7968
Care and Maintenance
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature
environments.
• Handle the remote gently and carefully. Don't drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it
looking new.
• Modifying or tampering with the remote's internal devices can
cause malfunction and invalidate its warranty.
Limited Lifetime Warranty
Voxx Accessories Corp.
(the "Company") warrants to you the original retail
purchaser of this product that should it, under normal use and conditions,
be proven defective in material or workmanship during its lifetime while you
own it, such defect(s) will be repaired or replaced (at the Company's option)
without charge for parts and repair labor. To obtain repair or replacement
within the terms of this Warranty, the product is to be delivered with proof
of warranty coverage (e.g. dated bill of sale), specifi cation of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not cover product purchased, serviced or used outside
the United States or Canada. This Warranty is not transferable and does
not extend to costs incurred for installation, removal or reinstallation of
the product. This Warranty does not apply if in the Company's opinion,
the product has been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or the simultaneous use of different
battery types (e.g. alkaline, standard or rechargeable).
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES WHATSOEVER. No person or representative is authorized
to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This
Warranty gives you specifi c legal rights and you may also have other rights,
which vary from state/province to state/province.
U.S.A.: Audiovox
Return
Center, 150 Marcus Blvd., Hauppauge, New York
11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,
Unit 3, Door 16, Mississauga, Ontario L5T 3A5
©2013 Voxx Accessories Corp.
3502 Woodview Trace, Suite 220
Indianapolis, IN 46268
Trademark(s) ® Registered
RCR6473R US 04
Hide quick links:
Advertisement
