Child Lock - LG WD12570FD Owner's Manual

H ow to use washer

Child lock

If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously. (About three seconds)
• When child lock is set, all buttons are inoperable
except for power button.
• When child lock is set,
time are displayed by turns.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur.
18
and remaining
Change
the desired
program
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse +
- Medic Rinse
- Normal+Hold
- Rinse + +Hold
1. Normal
• Allergy Care, Baby care performs 4 Rinses.
• Cotton, Synthetic, Duvet, Hand Wash/Wool
performs 3 Rinses
• Cotton Quick, Quick 30 performs 2 Rinses.
2. Rinse + & Medic Rinse
• Used to additional rinse, which may assist in
removing traces of detergent residue.
• By selecting Rinse + or Medic Rinse
function, the Rinse Time and the Rinse
water are increased.
• Medic Rinse includes water heating in the
last rinse.
3. Rinse Hold
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed to a Drain or Spin function after
a Rinse hold, select Drain on the program
dial or press the Spin selector button to the
desired speed, then press the Start/Pause
button.
The required lamp will light up for
identification.