Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG WD-SR1212R
Summary of Contents for LG WD-SR1212R
- Page 1 P/No.: MFL30138481...
- Page 2 OWNER’S MANUAL WD-1250ERD WD-SR1212R Thank you for buying a LG Fully Automatic Washing machine. Please read your owner’s manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing machine.
-
Page 3: Table Of Contents
roduct Feature Direct Drive System The advanced Brushless DC motor directly drives the drum without belt and pulley. Water Circulation Sprays detergent solution and water onto the load over and over. Clothes are soaked more quickly and thoroughly during wash cycle. The detergent suds can be removed more easily by the water shower during rinse cycle. -
Page 4: Warnings
arnings READ ALL INSTRUCTIONS BEFORE USE For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. IMPORTANT SAFETY INSTRUCTIONS WARNING : To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: •... - Page 5 arnings To minimize the risk of fire in a tumble dryer, the following should be observed: • Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer. Oil-affected items can ignite spontaneously, especially when exposed to heat sources Such as in a tumble dryer.
-
Page 6: Specification
pecification Inlet Hose Name : Front loading washing machine Power supply : 220-240V~, 50Hz Size : 635mm(W) x 720mm(D) x 925(H) Weight : 80kg Wash capacity : 12kg(2200W) Dry capacity : 7kg(2200W) Max. Watt : 2200W Spin speed : No Spin/400/800/1000/1200 Water consumption 113ℓ... -
Page 7: Installation
nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. - Page 8 nstallation Installation place requirement Level floor : Drain Hose Allowable slope under entire washer is 1° Washer Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than Laundry one appliance.
- Page 9 nstallation Electrical connection 1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3.
- Page 10 nstallation Normal Tap without thread & screw type inlet hose Unscrew the fixing screw to Push the connector up till the Push the water supply hose attach the tap. rubber packing is in tight contact vertically upwards so that the with the tap.
- Page 11 nstallation This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the Plug.
- Page 12 • If possible install the washer in one of the corners of the room, where the floor is more stable. ※ ※ Insert the rubber cups to reduce vibration. ※ ※ Rubber cups ( p/no. 4620ER4002B ) can be purchased from the LG spare parts department. Important! •...
-
Page 13: Care Before Washing
are before washing Before the first washing Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing. Caring before washing 1. -
Page 14: Adding Detergent
dding detergent Adding detergent and fabric softener 1. The Dispenser Drawer • Main wash only ➔ • Pre Wash + Main Wash ➔ 2. Adding Fabric Softener • Do not exceed the maximum fill line. Close the dispenser drawer slowly. Overfilling can cause early dispensing of the fabric softener which could stain clothes. - Page 15 dding detergent ❋ Tips 3. Detergent dosage Full load : according to • The detergent should be used according to the manufacturer’s recommendation. instruction of the detergent manufacture. Part load : 3/4 of the normal amount. • If too much detergent is used, too many suds Minimum load : 1/2 of full load.
- Page 16 unction Recommended courses according to the laundry type Proper Additional Maximum Program Fabric Type Temp. Option Load (Option) Color fast garments 60˚C (Cold, (shirts, night dresses, Cotton - Pre Wash Rating 30˚C, 40˚C, pajamas...)and lightly soiled white - Rinse+Spin 95˚C) cotton (underwear...) - Less Steam - Eco Steam...
- Page 17 ow to use washer 1:12 Time Left Washing _ _ _ Normal 1200rpm 60°C 2. Manual Selecting 1. Cotton automatically selected upon power on. • Press the Power( ) button to turn the washer on. • Press the Power( ) button to start. •...
- Page 18 ow to use washer Cotton Quick Cotton Quick Synthetic Synthetic Cotton Delicate Delicate 1:12 Time Left Washing Hand W Hand Wash _ _ _ Normal 1200rpm 60°C /Wool Quick 30 Quick 30 (6) (7) (10) (11) (12) (13) (1)Button: Power (4)Button: Option (7)Button: Spin (10)Button: Time Delay...
- Page 19 ow to use washer Option Start/Pause Pre Wash Rinse + Spin Less Steam Eco Steam _ _ _ Less Normal 1200rpm 1. Start Steam • This Start/Pause button is used to start • By pressing the option button, only one wash cycle or pause the wash cycle.
- Page 20 ow to use washer Rinse Child lock Rinse+ + Hold Normal + Hold Medic Rinse Rinse+ Normal If you choose to lock the buttons on the _ _ _ Less Medic 1200rpm Steam Rinse control assembly to prevent tampering, this function may be selected.
- Page 21 ow to use washer Spin Water Temperature 1200rpm 95°C 1000rpm 60°C 800rpm 40°C 400rpm 30°C No spin Cold _ _ _ Less 400rpm _ _ _ Medic Normal 1200rpm 40°C Steam Rinse • By pressing the Temp. button, the • By pressing the Spin button, the spin speed can be chosen.
- Page 22 ow to use washer Detecting Time Delay _ _ _ Time Left 3:00 Time Left To increase the delay wash time Detecting press on the time delay button. _ _ _ Normal 1200rpm 60°C _ _ _ Normal 1200rpm 60°C •...
-
Page 23: Function
ow to use washer Refresh Turbo Steam I Refresh cycle • For slightly wrinkled clothes which have Turbo Steam been stored for an extended time. _ _ _ Time Left This cycle makes wrinkled clothes easy to iron (Do not load wet clothes). Use on tough stained clothes. - Page 24 ow to use washer Tub Clean Tub Clean course can be set by pressing and holding Spin and Temp. button simultaneously. • Do not overload above the maximum When Tub Clean course is set, display drying capacity indicator. Items must be “Tub Clean”, and all buttons are inoperable.
- Page 25 ow to use washer Woolen Articles 2. Manual Drying time guide - Do not tumble dry woolen articles. Pull them • By turning the Dry button, the drying time to their original shape and dry them flat. can be selected. - Some woven and loop knit materials may •...
- Page 26 ow to use washer Display 3. Completion of washing 1:12 Time Left • When washing cycle is completed, Washing “End of cycle” is displayed on the _ _ _ Normal 1200rpm 60°C “Multi display”. 1. Special function display 4. Time left •...
-
Page 27: Maintenance
aintenance ❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards. ❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. The water inlet filter - "... - Page 28 aintenance The drain pump filter ❋ The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove whatever any threads or objects.
- Page 29 aintenance Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downward and by pulling it out.
- Page 30 aintenance The water circulation nozzle & steam nozzle • Clean the water circulation nozzle, if clogged. Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent.
- Page 31 roubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately. When the machine does not function properly or does not function at all, check the following points before you contact your service provider. Symptom Possible Cause Solution...
- Page 32 roubleshooting guide Symptom Possible Cause Solution Water in the washer • Drain hose is kinked or clogged. Clean and straighten the drain hose. does not drain or • The drain filter is clogged. Clean the drain filter. drains slowly. Washer does not start •...
- Page 33 roubleshooting guide Symptom Possible Cause Solution • It takes time to balance the Wash cycle time The washing time may vary by the laundry before the spin cycle delayed amount of laundry, water pressure, water temperature and other usage conditions. If the imbalance is detected or if the suds removing program works, the wash time shall be increased.
- Page 34 roubleshooting guide Symptom Possible Cause Solution Check another tap in the house. • Water supply is not adequate in area Fully open tap. • Water supply taps are not completely open. Straighten hose(s). • Water inlet hose(s) are kinked. Check the filter of the inlet hose(s). •...
-
Page 35: Terms Of Warranty
erms of Warranty What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God. •...