GMC Safari 2003 Owner's Manual page 119

4. Center the garage door opener activation button
over the console door button and press the opener
firmly into place.
5. Add one peg at a time until the garage door opener
operates with the compartment door closed when
you press the button. Adjust the position of the
garage door opener and add or remove pegs
as needed, until the opener operates properly.
The pegs inside the
compartment door are
used to make sure
the button on the
compartment door will
contact the control button
on the garage door
opener.
With the garage door opener positioned properly and
the right number of pegs in place, you can press
the button to operate the opener.
Your vehicle may be equipped with a HomeLink
Transmitter. For more information, see HomeLink
Transmitter on page 2-34 .
6. Now, with the
compartment door
closed, press the
button again to make
sure the garage
door opener operates
properly.
®
®
2-41