To return the seatbacks to the passenger position, do the
following:
2. Push forward on the seatback to make sure it is
locked into position.
1. Pull up on the release
lever labeled 1 and then
pull up on the seatback
or the assist strap
located on the outboard
side of the seat until the
seatback locks into the
upright position.
Tilting the 50/50 Split Bench Seat
1. Fold the seatbacks forward using the instructions
listed previously.
3. Lift the rear of the seat up from the floor and push it
forward until it locks into place. You will not be able
to unlatch the seat from the floor unless the
seatback is folded down.
The seat will now remain locked in the upright position.
2. Unlatch the seat from
the floor by pulling up
on the lever labeled 2
located on the rear
of the seat.
1-13