Operating And Cleaning Your Ceiling Fan - Hunter 42819-01 Installation And Operation Manual

7 • Completing Your Installation With or Without a Light Fixture (continued)
7-10. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fi t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-11. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three housing assembly screws.
If you are not installing the light fi xture, your installation is
complete. Otherwise, proceed with step 7-12.
7-12. Install one screw-in CFL (compact fl ourescent) bulb (19 Watt
Maximum). Do Not use incandescent bulbs in this fi xture.
12
7-13 Insert the globe into the fi xture. Install and tighten the
thumbscrews manually. Do not overtighten.
Note: If thumbscrews are pre-threaded, loosen the screws before
inserting the globe, then retighten securely.
Hunter Fan Company
Connector
Steps 7-6 – 7-7
Lower Switch
Housing
Plug
Connector
Detail
Housing
Assembly Screw
CFL bulb
(max 19W)
Globe
Steps 7-12 – 7-13
42819-01 • 11/14/06
8 • Operating and Cleaning Your Ceiling Fan
Plug
In warm weather, use
downward air fl ow pattern
In cold weather, use upward
air fl ow pattern
To Change Airfl ow Direction
Turn the fan off and let it come to a complete
stop. Slide the reversing switch on the fan to the
opposite position. Restart fan.
42819-01 • 11/14/06
8-1. Turn on electrical power to the fan.
8-2. Th e fan pull chain controls power to the fan. Th e pull chain has
four settings in sequence: High, Medium, Low and Off .
• Pull the chain slowly to change settings.
• Release slowly to prevent the chain from recoiling into the
blades.
• Th e chain uses a breakaway connector that separates if the
chain is jerked. If this happens, simply reinsert the chain into
the connector.
8-3. Th e light pull chain controls power to the light. Th e pull chain has
two settings: On and Off .
8-4. Ceiling fans work best by blowing air downward (counterclockwise
blade rotation) in warm weather to cool the room with a direct
breeze. In cold weather, having the fan draw air upward (clockwise
blade rotation) will distribute the warmer air trapped at the
ceiling around the room without causing a draft.
8-5. For cleaning fi nishes, use a soft brush or lint-free cloth to prevent
scratching. A vacuum cleaner brush nozzle can remove heavier
dust. Remove surface smudges or accumulated dirt and dust using
a mild detergent and a slightly dampened cloth. You may use
an artistic agent, but never abrasive cleaning agents as they will
damage the fi nish.
8-6. Clean wood fi nish blades with a furniture polishing cloth.
Occasionally, apply a light coat of furniture polish for added
protection and beauty. Clean painted and high-gloss blades in the
same manner as the fan fi nish.
Reversing
Switch
Step Title
13
Hunter Fan Company