Frequently Asked Questions - Blaupunkt 42/333I-GB-5B-F3HBKUP User Manual

Frequently Asked Questions

General I would like to have
louder sound by
connecting additional
speakers
General Why are some
options in the menu
unavailable and
greyed out
General Can I stop my TV
turning off after
4hrs?
TV I have tuned in
Digital TV but I am
not receiving any or
all of the channels
and/or the channels I
receive are breaking
up
TV I have re-tuned my
television but when
I switch it off it is not
storing the channels
Game I have connected
Consoles my PS3 to the TV
via HDMI, but I am
not receiving any
pictures or sound on
my TV
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
32
Subject to the TV model and connections, it is possible to connect the TV
to an external amplifi er or surround sound (subject to connections/inputs on
the device) as follows:-
1) Connect a COAX cable* from the TV's COAX output to your amplifi er/
surround systems COAX input
2) Connect a 3.5mm jack to L/R phono cable* from the TV's headphone
socket (where fi tted) to your amplifi er/surround sound L/R input. Please
note sound to the TV's speakers will be disabled.
Some options are only available in certain sources, i.e. HDMI, PC/VGA.
They are unavailable in the other sources where they have no affect.
Yes, In the time settings menu, scroll down to Auto standby and select OFF
1) Check you are in an area that can receive Freeview. Visit
www.freeview.co.uk
2) Check you are using an aerial that is able to receive a good digital
signal. In most cases, you will need an outdoor digital hi-gain/wideband
aerial. In areas that have excellent Freeview coverage, you may be able to
use a loft type aerial but it is highly likely that you will also need to connect
a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible
to use a portable/indoor type aerial. This may change once the analogue
signal is switched off in 2012 and the Digital signal strength is increased.
Complete a fi rst time installation, please refer to the set-up menu section of
the manual of how to do this
1) Ensure the TV's source is on HDMI
2) Check your settings on your PS3 are as per the PS3 instruction manual