Important Guarantee Information Congratulations on purchasing this television. We hope you have many years of trouble free enjoyment from your purchase. Your product is covered under the manufacturers guarantee for 12 months from date of purchase. In the event of a fault being diagnosed, please refer to the frequently asked questions/ troubleshooting section at the rear of this user guide.
Important Safety Instructions IMPORTANT - Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. • Batteries (battery pack or batteries installed) Warnings shall not be exposed to excessive heat such as sunshine, fi...
Page 5
Important Safety Instructions IMPORTANT - Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. Important Information - Regarding Use of How do I dispose of this product? Video Games, Computers, Captions or Other Fixed Image Displays UK: Waste electrical products should not be disposed of with household waste.
Page 6
Important Safety Instructions IMPORTANT - Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. Risk of photosensitization seizure can be 3D Safety Information reduced with the following actions. • If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.
Contents Manufacturers Guarantee Information Important Safety Instructions What is included in the box Attaching the stand 9-10 Detaching the stand and securing the TV to a wall Wall mounting Getting Started - Initial Set Up TV Buttons and Input Source Menu Remote Control Connections 16-18...
What Is Included In The Box Accessories Included with this TV are the following accessories: 1 x Remote Control 1 x User Guide User Guide 1 x Quick Start Guide 2 x AAA Batteries 1 x RF Cable 1 x TV 1 x Stand Installation Pack 4 x 3D Glasses Screws For 42”...
Attaching The Stand For 42” TV Set To complete the stand installation you will require a Phillips screw driver. The Stand Installation pack comes with two sets of screws. 6 x M(4x16) 5 x ST(4x20) fi g 1) Attach the stand neck to the rear of the TV set. fi...
Attaching The Stand For 47” TV Set To complete the stand installation you will require a cross head screw driver. The Stand Installation pack comes with two sets of screws. 4 x M(4x14) 5 x ST(4x20) fi g 1) Attach the stand neck to the rear of the TV set. fi...
Detaching The Stand And Securing The TV To A Wall Detaching the Stand For 42” models only. To detach the stand please For 47” models only. To detach the stand please remove the 6 screws highlighted then remove the remove the 4 screws highlighted then remove the stand neck and base from the rear of the TV set.
Wall Mounting IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electric wires, water or gas pipes. To complete the stand installation you will require a cross head screw driver. 1) Remove the four screws highlighted below.
Getting Started - Intial Set Up 1) Using the RF cable supplied, connect the TV to the TV Aerial wall socket (Fig A) Fig B Connect the power cable to the Electrical outlet Fig A (Fig B) 2) Switch on the television using the power on/off switch located on the side of the TV.
TV Buttons & Source Menu 1. Volume up and menu right 5. Displays Menu/OSD 2. Volume down and menu left 6. Displays the input source menu 3. Programme/Channel up and menu up 7. Standby Power On/Off 4. Programme/Channel down and menu down Choosing Mode Input/Source To switch between the different input/connections.
Remote Control Viewing remote control - TV 1. STANDBY 2. MUTE 3. DTV 4. RADIO 5. DVD 6. USB 7. NUMBER BUTTONS 8. TV GUIDE - To return to the previous channel viewed 10. P.MODE - Scrolls through picture mode options 11.
Connections COAX Audio Out Digital Coax output USB Input HDMI 3 HDMI input CI CARD IN Common Interface module Video Video Input R/L Audio in Component Audio input COMPONENT (HD) Component input (YPbPr) EARPHONE Earphone Socket HDMI 1 HDMI input HDMI 2 HDMI input VGA PC Audio In...
Page 17
Connections Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box TVs Input/Source should be set to Analogue RF in DVD or VCR TV Aerial Wall Socket Connecting a Camcorder, Camera or Games Console Source should be set to Video Camera or Camcorder Yellow Video...
Page 18
Connections Connecting a High Defi nition (HD) Device Option 2 - via Component cable If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by phono cable (for sound).
Channel Menu To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] Auto Tuning If you wish to make changes to any of the default Allows you to retune the television for all digital settings, use the scroll buttons.
Picture Menu To access this menu, press [MENU] button on the remote control and scroll right. To enter a menu press [OK] Picture Mode • Dynamic - Recommended settings for fast If you wish to make changes to any of the default moving pictures settings, use the scroll buttons.
Sound Menu Digital Output Sound Mode • Off - Off • Auto - Selects the best settings automatically • Standard - Default settings • Music - Emphasises music over voices • PCM - Select this option if you are connecting to a Stereo Hi-fi...
Time Menu To access this menu, press [MENU] button on the remote control and scroll right. To enter a menu press [OK] Clock If you wish to make changes to any of the default Shows the date and time settings, use the scroll buttons.
System/Hotel Lock Menu To access this menu, press [MENU] button on the remote control and scroll right. System/Hotel Lock To enter a menu press [OK] Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password use the button to If you wish to make changes to any of the default quit the password input.
Setup Menu Within the UK the picture format varies depending on the channel/broadcast. There are a number of different options to best meet your needs • Auto - Automatically displays the best picture format. So the picture is in the correct position. May have black lines at the top/bottom and/or sides.
3D Settings For the best 3D picture effect, watch your TV from vertical angle +/- 10°. 3D Type When connecting a 3D product sometimes the picture maybe displayed incorrectly; choose from the following settings to correct this. You can toggle these settings by pressing the '3D' button on your remote 3D Off Default settings...
Using The Television As A Computer Monitor How to set up for Windows XP & Windows Vista (connecting via VGA cable to the TV) IMPORTANT – Before connecting the computer to the television you must ensure the computer settings are correct for the television.
Page 27
PC Settings To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default Auto Adjust settings, use the scroll buttons. To confi rm Lets you automatically confi...
7 Day TV Guide TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the freeview channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders. 1) Press [TV GUIDE].
USB Mode / Media Player USB mode offers playback of various different types of content that you have saved on your USB Memory Stick. On switching to USB source the above menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on fi...
USB Record - Digital Mode USB RECORD – FREEVIEW/SAORVIEW MODE Built into this television is a USB record facility. This function is available in Freeview/Saorview mode when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as follows: •...
Using Your TV With a Sky Digital Set Top Box Option 1) Connecting your TV to your Sky box (when both the TV and Sky Box are located in the same room) Depending on your Sky Box & TV model, connect either by SCART or HDMI cables (available separately) If connecting by SCART, select the ‘Input source’...
Frequently Asked Questions General I would like to have Subject to the TV model and connections, it is possible to connect the TV louder sound by to an external amplifi er or surround sound (subject to connections/inputs on connecting additional the device) as follows:- speakers 1) Connect a COAX cable* from the TV’s COAX output to your amplifi...
Page 33
Frequently Asked Questions Game I have connected Component cables only provide HD Pictures. For the sound you will need Consoles my Xbox 360 to the to connect the Red & White audio cables on the Xbox to the Red & White TV via Component phono inputs on the rear of the TV.
Technical Specification Model 42/333I-GB-5B-F3HBKUP 47/333I-GB-5B-F3HBKUP Screen size (diagonal) 42”/107cm 47”/119cm Resolution 1920 x 1080 75 ohm Antenna / PAL-SECAM Video Inputs 3 x HDMI, 1 x VGA/PC, 1 x USB, 1 x Composite/Video, 1 x Component/YPbPr 1 x shared audio for Composite/Video & Component/YPbPr, Sound Inputs 1 x 3.5mm jack for PC audio input...