Time Search; Slow Motion - LG LH-R5500SB Owner's Manual

DVD and Video CD Operation (Continued)
General Features (Continued)

Slow Motion

1. Press PAUSE/STEP (X) during playback.
The Recorder will enter PAUSE mode.
2. Press SCAN (m or M) during PAUSE mode.
The DVD Recorder Receiver will enter SLOW mode.
3. Use the SCAN (m or M) to select the required
speed.
DVD; 4 steps (forward and backward)
DivX; 4 steps (forward only)
Video CD; 3 steps (forward only)
4. To exit Slow Motion mode, press B (PLAY).
Note :
Slow motion playback in reverse is not possible with
Video CDs.
Repeat
DVD Discs - Repeat Chapter/Title/Off
Press REPEAT to select a desired repeat mode.
• Chapter: repeats the current chapter.
• Title: repeats the current title .
• Off: does not play repeatedly.
Video CDs, DivX - Repeat Track/All/Off
Press REPEAT to select a desired repeat mode.
• Track: repeats the current track.
• All: repeats the all tracks on the Video CD or in the
folder (DivX disc).
• Off: does not play repeatedly.
Note :
On a Video CD with PBC, you must set PBC to OFF in
the Setup menu to use the Repeat function. See page
28.
Repeat A-B
To repeat a sequence in a title:
1. Press A-B at your chosen starting point.
Repeat icon and 'A-' appears on the TV screen.
2. Press A-B again at your chosen ending point.
Repeat icon and 'A-B' appears on the TV screen, and
the repeat sequence begins.
3. To cancel the sequence, press A-B repeatedly to
select Off.
36

Time Search

The Time Search function allows you to start playback
at any chosen time on the disc.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
The Time Search box shows the elapsed playing
time of the current disc.
2. Within 10 seconds, use v / V to select the Time
Search icon in the On-Screen Display.
The "--:--:--" display appears in the Time Search box.
3. Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and
seconds from left to right in the box.
You can not enter an invalid time.
If you enter the wrong numbers, press CLEAR. Then
enter the correct numbers.
4 Within 3 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc.
Zoom
DVD Video VR
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1. Press ZOOM during playback or still playback to acti-
vate the Zoom function.
Each press of the ZOOM button changes the TV display in
the sequence shown below.
x2 size → x4 size → normal size
2. Use the b B v V buttons to move through the
zoomed picture.
3. To resume normal playback, press CLEAR or press
ZOOM repeatedly until the normal picture appears.
Note :
The Zoom function may not work for some DVDs.
+RW +R VCD