Hi Power Mode; ([Hi Power] Button On The Remote Controller Is Pushed) - Toshiba RAS-B10SKVP-E Service Manual

9-6. Hi POWER Mode

([Hi POWER] button on the remote controller is pushed)

When [Hi POWER] button is pushed while the indoor unit is in Auto, Cooling or Heating operation, Hi POWER
mark is indicated on the display of the remote controller and the unit operates as follows.
1. Automatic operation
• The preset temperature changes according to the operation mode selected.
In the Cooling operation, the preset temperature drops 1°C.
In the Heating operation, the preset temperature increases 2°C.
2. Cooling operation (Manual)
• The preset temperature drops 1°C.
(The value of the preset temperature on the remote controller does not change.)
3. Heating operation (Manual)
• The preset temperature increases 2°C.
(The value of the preset temperature on the remote controller does not change.)
4. The Hi POWER mode can not be set in Dry operation
5. Release of Hi POWER mode
• Push [Hi POWER] button on the remote controller again.
– 54 –