Functional Description; Carton Contents; Battery Charging And Installation - Delta ShopMaster CL180BN Instruction Manual

Cordless brad nailer

Hide thumbs

Table Of Contents

Table of Contents

14. Do not charge battery pack when the temperature is BELOW 40°F

(4.4°C) or ABOVE 104°F(40°C). This is very important for proper

operation.

15. Do not incinerate battery pack. It can explode in a fire.

16. Do not charge battery in damp or wet locations.

17. Do not attempt to charge any other cordless tool or battery pack with

the Delta charger.

18. Do not short across the terminals of the battery pack: EXTREMELY

HIGH TEMPERATURES COULD CAUSE PERSONAL INJURY OR FIRE.

19. Double insulated tools are equipped with a polarized plug (one

blade is wider than the other). This plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any way. Double

Insulation

cord and grounded power supply system.

20. Dispose of expended batteries properly. The

Delta Battery Packs contains rechargeable, nickel-

cadmium batteries. These batteries must be

recycled or disposed of properly. Drop off

expended battery packs at your local replacement

battery retailer, your local recycling center, or at a

Delta Service Center (see list on back page of this

manual). Applicable fees for the collection and

recycling of these batteries (in the United States),

have been paid to the RBRC

information, call: 1-800-8-BATTERY.

FOREWORD

Delta Model CL180BN Cordless Brad Nailer is a heavy duty pneumatic brad

nailer. It is designed to install 18 ga. brad nails of various lengths (from

" long).

SOLD ONLY IN COMBO KIT CL180WWK that includes;

1) CL180 - Drill

2) CL180C - Charger

3) CL180CS - Circular Saw

4) CL180JS - Jig Saw

5) CL180PS - Pad Sander

BATTERY CHARGING AND INSTALLATION

CHARGING THE BATTERY

Before using your cordless tool for the first time, fully charge the battery

pack. If the battery pack is installed in the tool, remove it by following

instructions under INSTALLING OR REMOVING BATTERY PACK.

eliminates the need for the three wire grounded power

™

. For further

SAVE THESE INSTRUCTIONS!