Download Print this page

Complete Unit; Before Beginning - Omnimount NC200T Instruction Manual

Large tilt flat panel mount
Hide thumbs Also See for NC200T:

Advertisement

WARNING!
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM
IMPROPER INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS

BEFORE BEGINNING.

If you do not understand the instructions or have any concerns or questions, please contact us at
800.668.6848 or info@omnimount.com.
missing. If you require replacement parts please call
FOR WALL MOUNTED PRODUCT:
wood studs or solid concrete. Wood studs being defined as a wall consisting of a minimum of 2" x 4" studs
with a maximum of 24" stud spacing and a minimum of 16" stud spacing with a maximum of ½" inch of wall
covering (drywall, lath, plaster). For custom installations please contact
info@omnimount.com.
For safe installation, the wall you are mounting to must support 4 times the weight of the total load (flat panel
and wall mount). If not, the surface must be reinforced to meet this standard. The installer is responsible for
verifying that the wall structure/surface and the anchors used in the installation will safely support the total
load. Do not use this product for any application other than those specified by OmniMount.
This product may contain moving parts. Use with caution.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.
¡ADVERTENCIA!
LA INSTALACIÓN O EL MONTAJE INAPROPIADOS PUEDEN PROVOCAR LESIONES, DAÑOS
MATERIALES O INCLUSO LA MUERTE. ANTES DE COMENZAR, LEA LAS SIGUIENTES
MATERIALES O INCLUSO LA MUERTE ANTES DE COMENZAR LEA LAS SIGUIENTES
ADVERTENCIAS.
Si las instrucciones no le resultan claras o si tiene alguna duda o pregunta, comuníquese con un instalador calificado. Si
el producto o el hardware está dañado o no se le envió alguna pieza, no realice la instalación ni el montaje. Si necesita
piezas de repuesto, comuníquese con el servicio de Atención al cliente de o por escrito 800.668.6848 or
info.omnimount.com
Información acerca de los productos que se instalan en la pared:
Información acerca de los productos que se instalan en la pared:
paredes verticales con paneles de madera u hormigón. Se define a los paneles verticales como una pared que consiste de un
mínimo de paneles de 5 x 10 cm con un espacio entre paneles máximo de 60 cm y un espacio mínimo entre paneles de 41 cm,
con un máximo de cobertura de pared (hoja de yeso, listón, yeso) de 13 mm. Para instalaciones a medida contacte 800.668.6848
or info.omnimount.com. Para realizar una instalación segura, la pared elegida debe ser capaz de soportar 4 veces el peso de la
carga total (montaje plano del panel y de la pared). De lo contrario, deberá reforzar la superficie para que cumpla con este
requisito. El instalador es el responsable de comprobar que la estructura/superficie de la pared y los tacos que se utilizan en la
instalación soporten la carga total de manera segura.
Este producto puede contener componentes móviles. Úselo con precaución.
Este producto puede contener componentes móviles Úselo con precaución
NO EXCEDA LA CAPACIDAD DE PESO MÁXIMA PARA ESTE PRODUCTO.
MAXIMUM WEIGHT CAPACITY
MÁXIMA CAPACIDAD DE PESO

COMPLETE UNIT

USE WITH FLAT PANELS LARGER THAN THE MAXIMUM
WEIGHT AND/OR SCREEN SIZE MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY.
EL USO CON EL PANEL PLANO MÁS GRANDE QUE EL PESO
MÁXIMO Y TAMAÑO PUEDE CAUSAR INESTABILIDAD Y
POSIBLEMENTE HERIDAS.
Do not install or assemble if the product or hardware is damaged or
This product has been designed for use on a vertical wall constructed of
POUNDS (LBS) / KILOGRAMS (KG)
LIBRAS (LB) / KILOGRAMOS (KG)
200(LBS) / 90.7 (KG)
800.668.6848 or info@omnimount.com.
800.668.6848 or
Este producto está diseñado para ser instalado en
Este producto está diseñado para ser instalado en
MAXIMUM SCREEN SIZE
TAMAÑO DE PANTALLA MÁXIMO
80 in.
80
80"
200
lbs
P2

Advertisement

loading