Robopanda Basics; Powering On/Off; Sleep Mode; Play Mode - WowWee ROBOPANDA 8068 User Manual

ROBOPANDA™ BASICS
IMPORTANT
You must have a cartridge inserted in Robopanda's cartridge slot before you
can play with him. See the section on Robopanda cartridges for more
information.
All of Robopanda's four limbs move independently. Robopanda is able to sit,
crawl and sit up again. Robopanda can tilt his head up and down, and turn his
head from left to right. His eyebrows and ears are also animated!
With his multitude of sensors, Robopanda recognizes when you touch him on
various places of his body. You can even pat or touch him on the head and he will
be able to distinguish the difference and respond accordingly.
You interact with Robopanda by touching these sensors; for instance, to navigate
through menu mode, to play games with him, and to help him tell his stories.
Powering on/off
You can operate
Robopanda in one of three
play modes by moving
the position of his power
switch (located on his back
side).
Refer to the section
Robopanda's play modes
for a description of these
modes.
Note: Make sure he is in
a firm sitting or standing
position when you switch
on Robopanda. If not he
might fall over when you
turn him on.
Sleep mode
If you leave Robopanda unattended, he will go into sleep mode to
conserve batteries within 4 minutes of the last time you touched him.
To wake him up from sleep mode, toggle the power switch (move the switch to
the OFF position, then move it back to one of the positions for the play modes).
NOTE: Even in sleep mode, Robopanda is still powered. Make sure you turn him
off manually when you are done playing with him.
NOTE: If Robopanda is in Friend mode, make sure that you turn him off manually
if you are not going to play with him for a while; otherwise he will continue to
talk until the batteries run out.
4
Friend
Training
Menu
Mode Mode
Off
Mode