Cartridges; Changing Cartridges - WowWee ROBOPANDA 8068 User Manual

ROBOPANDA™ CARTRIDGES
Changing cartridges
To change the activity and story cartridge on Robopanda:
NOTE: Before changing cartridges, makes sure that Robopanda is turned off (switch
is set at the OFF position).
1 On the back side of Robopanda, open the battery and cartridge compartment
door.
2 If there is no cartridge already inserted, insert a cartridge into the cartridge slot.
3 If there is a cartridge already inserted, push on the Eject button to eject the
current cartridge.
The activity and story cartridge will pop out. Remove the current cartridge and
insert a new cartridge into the cartridge slot.
NOTE: If you remove the activity and story cartridge while Robopanda is on, he will
tell you to put the cartridge back in. However, remember that if you replace the
cartridge in Robopanda you must turn him off first, insert the cartridge, and then
turn him back on.
8
Cartridge Compartment
Eject Button
Back view of Robopanda