D-Link DWL-2100AP Command Line Interface Reference Manual page 28

The following is an example in which the authentication is set to WPA-PSK.
The following is an example in which the authentication is set to WPA.
802.11 b/g Access Point Command Line Interface Manual
D-Link Access Point wlan1 -> set authentication shared-key
Authentication Type: Shared-Key
D-Link Access Point wlan1 -> set key 1 40 1234567890
Shared Key 1, size 40: 1234567890
D-Link Acc ess Point wlan1 -> set key 1 default
Default Key: 1
D-Link Access Point wlan1 -> set encryption enable
Encryption: Enabled
D-Link Access Point wlan1 -> set authentication wpa-psk
Authentication Type: WPA-PSK
D-Link Access Point wlan1 -> set encryption enable
Encryption: Enabled
D-Link Access Point wlan1 -> set cipher auto
Cipher selection: AUTO
D-Link Access Point wlan1 -> set passphrase
Old Passphrase->
New Passphrase-> **********
Type passphrase again to confirm-> **********
Passphrase confirmed
26