D-Link DWL-2100AP Command Line Interface Reference Manual page 15

WMM
Get Command:
get wmm Display WMM mode status (enabled or disabled)
get wmmParamBss Display WMM EDCA parameters used by STA in this BSS
get wmmParam Display WMM EDCA parameters used by this AP
Set Command:
set wmm Enable or Disable WMM Features
set wmmParamBss ac Set WMM (EDCA) parameters used by STAs in this BSS
set wmmParam ac Set WMM (EDCA) parameters used by this AP
802.11 b/g Access Point Command Line Interface Manual
Function
Function
13
Syntax
get wmm
get wmmParamBss
get wmmParam
Syntax
set wmm [disable:enable]
set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs]
[txOpLimit] [acm]
Expanation:
AC number: 0->AC_BE
1->AC_BK
2->AC_BK
3->AC_BK
Exampble:
set wmmParamBss ac 0 4 10 3 0 0
set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs]
[txOpLimit] [acm] [ack-policy]
Expanation:
AC number: 0->AC_BE
1->AC_BK
2->AC_BK
3->AC_BK