Page 1
Please leave this manual with the unit after installation Important warranty information enclosed Mitel On Hold 720 Brooker Creek Blvd., Ste. 215 Oldsmar, FL 34677 888.664.3366 Fax: 727.785.7659 http://mitelonhold.com info@onholdbusiness.com Mitel TELink 700 FLASH 06/2009...
Communications du Canada. Limited Warranty{tc \l1 "LIMITED WARRANTY} TERMS: Mitel warrants to the original purchaser ("Buyer") that the Product sold is free from defects in material and workmanship at the time of purchase. The warranty extends five (5) years from the date of original purchase and covers parts and labor.
In a typical installation, the unit is installed directly to the incoming telephone line with no other telephone equipment connected prior to the TELink. An installation involving a KSU or PBX may look like what is illustrated below: Mitel TELink 700 FLASH 06/2009...
Keep in mind that whichever installation procedure is used, the TELink must always be connected directly to the telephone company input, ahead of any other devices using that line. If you have any questions or require assistance installing the TELink, please contact Mitel. Mitel TELink 700 FLASH 06/2009...
7. Plug the included 12VDC power supply into a normal 110VAC wall outlet. Connect the other end to the 12VDC jack on the back of the TELink. 8. Turn the power switch ON. Turn to page 9 for further instructions. Mitel TELink 700 FLASH 06/2009...
7. Plug the included 12VDC power supply into a normal 110VAC wall outlet. Connect the other end to the 12VDC jack on the back of the TELink. 8. Turn the power switch ON. Turn to page 9 for further instructions. Mitel TELink 700 FLASH 06/2009...
7. Plug the included 12VDC power supply into a normal 110VAC wall outlet. Connect the other end to the 12VDC jack on the back of the TELink. 8. Set the fax machine to answer on the fewest rings possible (but a minimum of two rings). Mitel TELink 700 FLASH 06/2009...
Page 10
9. Turn the power switch ON. Turn to page 9 for further instructions. Mitel TELink 700 FLASH 06/2009...
IF IT IS ON (STEADY): An audio file is present in memory and is currently playing. Download is not required. IF IT IS FLASHING SLOWLY: No audio file is present. Contact Mitel. They must call the unit and download audio.
NIGHT ANSWER (N) provides the capability to store a separate 15, 30, 45, or 60 second night answer message, in addition to the standard MOH message. Before using Night Answer, Mitel must enable the feature from the PC Controller and download a standard MOH message and a Night Answer message. When activated (ON), the TELink answers incoming calls, plays the Night Answer message, then hangs up the call.
The NIGHT light on the front of the TELink indicates the current ON/OFF status of the Night Answer feature: NIGHT Light Indication Night Answer ON Night Answer OFF Slow flash – Night Answer OFF Flashing Fast flash – Night Answer ON Table 2—Night Light Indications Mitel TELink 700 FLASH 06/2009...
STATUS (or ACTIVE) light number has failed. alternates between 1 second flash flash, and 1 second no • If the initial callback validation has failed you flash. will need to contact Mitel for further instruction. Table 3—Troubleshooting Mitel TELink 700 FLASH 06/2009...