Table of Contents
Advertisement
Problem
You cannot read a file
Pointing device
If you are using a USB mouse, you should also refer to both the
device
mouse.
Touch Pad
Problem
The Touch Pad does
not work.
On-screen pointer does
not respond to pointing
device operation
Double-tapping does
not work
The on-screen pointer
moves too fast or too
slow
User's Manual
Procedure
Check to ensure the required file is actually on
the Memory Card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enable.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control Panel
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the pointer speed as required and click
-> Hardware and Sound -> Mouse.
the Buttons tab.
click OK.
Panel -> Hardware and Sound -> Mouse.
the Pointer Options tab.
OK.
Troubleshooting
USB
8-10
Advertisement
Table of Contents
