Programme Selection - Miele T 6185 Operating Instructions Manual

Programme selection

Make sure no articles of laundry are trapped
by the door, as this will cause damage to
the fabric.
Close the drum door.
Select a programme:
The dryer has an electronic sensor system
which monitors the residual moisture in the
laundry.
Once the required level of dryness has
been reached the laundry is cooled down
and the drying programme finishes auto-
matically.
-The programme selector can be turned in
a clockwise or anti-clockwise direction.-
Different drying programmes can be se-
lected with the programme selector de-
pending on the dryness level required for
further handling:
A
COTTONS
For drying cotton/linen textiles-
1
Extra dry
2
Normal plus +
3
Normal
4
Machine Iron
5
Machine Iron
6
Machine Iron
Residual moisture figures
(-4%)
(-2%)
(3%)
r
(13%)
rr
(20%)
rrr
(26%)
B
MINIMUM IRON
For drying polyester/cotton
mixtures, delicates and synthetics
7
Normal plus +
8
Normal
9
Hand Iron
C
TIMED DRYING
Airing and timed drying
0
without heating (15 mins)
For airing laundry
!
with heating (20 mins)
To dry small loads or
to finish off drying
individual items.
If required also select the "
erature" and/or "l Buzzer" functions.
h
Press in the "
- The drying programme selected now
starts.-
Note
1. The door can be opened during operation
(press the door button), to add articles of
laundry or to remove articles early. Do not
reach into a moving drum.
To continue the drying process close the
door and press the "Start" button, (as a
safety precaution the fan automatically
switches on if the temperature in the dryer
interior is high and the Indicator lights "Dry-
ing", "Cool air", and "Anti-crease/end" are
flashing).
2. If a new programme is to be selected, first
turn the programme selector to "End" and
then to the desired programme. Press the
"Start" button to start the new programme.
-The "On" indicator light flashes if the pro-
gramme selector is turned to a different
position after the start of a programme. It
stops flashing when the programme selec-
tor is turned back to the programme origi-
nally selected or is turned to "End" to finish
the programme.-
11
(-2%)
(2%)
r
(8%)
L
Low temp-
Start" button.
«M.-Nr.04832650/02 - GB - »