D-Link DAP-3310 Brochure & Specs page 2

Fine-Tuned Control Over Network Resources.
The DAP-3310 supports up to 8 SSIDs, allowing the administrators to logically
divide the access point into several virtual access points all within a single
hardware platform. Rather than having separate networks with several access
points, administrators can deploy one single AP to support more than one
application, such as public Internet access and internal network control to
increase flexibility and keep costs down. The DAP-3310 supports 802.1Q
VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance
performance and security. The DAP-3310 provides WLAN partitioning, a
useful function for deployments such as wireless hot spots. With station-to-
station partitioning enabled, security is enhanced, since wireless users cannot
peek at each other, and the possibility for data theft is reduced.
Wall/Pole Mount
Technical Specifications
General
Device Interfaces
LED
Antenna
Wireless Frequency
Standards
DAP-3310
Robust Security And Management Tools
The DAP-3310 supports 64/128-bit WEP data encryption and WPA/WPA2
security functions. In addition, it provides MAC Address Filtering to control
user access, and the Disable SSID Broadcast function to limit outsiders' access
to the internal network. Network administrators have multiple options for
managing the DAP-3310 including HTTP and HTTPS. For advanced network
management, administrators can use SNMPv1, v2c, v3 to configure and
manage access points.
Power over Ethernet (PoE)
The DAP-3310 is powered by PoE
especially in places where a power supply is not reliable or power cables
are not available or easily set up. Also, the DAP-3310 can supply power to a
connected D-Link surveillance camera through PoE, including the DCS-3716,
DCS-6113, and DCS-7110 cameras.
10/100 Ethernet Port
Supplies power through
PoE to surveillance
cameras
LAN Port Status Indicator
• 802.11n/g/b wireless
• Reset button
• Power
• LAN
• 10 dBi Sector Antenna
• 2.4 GHz
• IEEE 802.11 b/g/n
• IEEE 802.3u
Wireless N Exterior Access Point
which allows for convenient installation,
5
Wireless Signal Strength LED
LAN Port (PoE) Status Indicator
Reset Button
• Two 10/100 Ethernet port (one supports PoE)
• Grounding wire connector
• Wireless Signal Strength
• IEEE 802.3
10/100 Ethernet Port (PoE)
Grounding Wire Connector
8
9