The Stack Management Page contains the following fields:
•
Master Election — Indicates the method of electing the master device. The possible values are:
–
Automatically — The master is selected automatically by software.
–
Force Master — The unit is forced to be master of the stack. Note that only Unit 1 or Unit 2
can be the stack master.
•
Stacking Ports After Reset — Allows the user to decide what cable type is in use. The possible
values are:
–
Combo Ports — Indicates that the combo port is used as the stacking port.
–
Copper Ports — Indicates that the copper port is used as the stacking port.
•
Unit No.— Displays the current Stacking Master.
•
Unit No. After Reset — Indicates the stacking member elected Stacking Master after the device is
reset.
2. Define the relevant fields.
3. Click Apply. Stack management is defined, and the device is updated.
Viewing Device Health
The Health Page displays physical device information, including information about the device's power
and ventilation sources.
Chapter 2:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Stack Management Page
Chapter
2
15