Managing Stacks - Linksys SFE2000 Reference Manual

Chapter
2 SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
• Base MAC Address — Displays the device MAC address. If the system is in stack mode, the Base
MAC Address of the master unit is displayed.
• Hardware Version — Displays the hardware version number. If the system is in stack mode, the
hardware version of the master unit is displayed.
• Software Version — Displays the software version number. If the system is in stack mode, the
version of the master unit is displayed.
• Boot Version — Indicates the system boot version currently running on the device. If the system is
in stack mode, the version of the master unit is displayed.
• Switch Operation Mode After Reset — Indicates the mode the device operates in after the system
is reset. The possible field values are:
– Standalone — Indicates the device operates as a Standalone device after the system is reset.
– Stack — Indicates the device operates as a Stacked unit after the system is reset.
2. Define the relevant fields.
3. Click Apply. The system information is defined, and the device is updated.

Managing Stacks

The Stack Management Page allows network managers to either reset the entire stack or a specific
device. Device configuration changes that are not saved before the device is reset are not saved. If the
Stack Master is reset, the entire stack is reset. To open the Stack Management Page:
1.
Click System > System Management > Stack Management.
14
The Stack Management Page opens:
Chapter 2: