Connecting Up Your Player With Rf Lead - Nikai NDVD1073VR Instruction Manual

Dvd player + video cassette recorder
Hide thumbs Also See for NDVD1073VR:
Table of Contents

Advertisement

Connecting up your player with RF lead

Before you start, unplug all the equipment from the mains supply.
(Option 1) - How to connect with RF lead
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
Aerial
The type of aerial you should use,
depends on local interference and
how far you are from the
transmitter. You should contact a
local retailer if you have any
questions about your aerial.
¡
Remove circular cable (RF cable) (surplus cable) plugged in "ANT.IN" jack in rear panel of TV.
Connect the cable to "ANT" jack in rear panel of DVD-Video.
Connect TV to DVD-Video. Connect "TV" jack in DVD-Video with "ANT.IN" jack in TV with RF
cable.
In option (1) you need to tune your television to the player so you can see the picture from the player. When
it is on the player generates a signal on UHF transmission channel 52, but this might change after tuning in
the stations with 'AUTO-SEARCH' . See the 'Check it out' box on page 18. See your television manual for
how to tune in a new channel.
12
REAR PANEL OF TV
REAR PANEL OF DVD-VIDEO
INPUT 1
INPUT 2
ANT IN
RF CABLE
Before you start, unplug all the equipment from the mains supply.
(Option 2) - How to Connect with Audio/Video jack
REAR PANEL OF DVD-VIDEO
AUDIO/VIDEO CABLE
£
(If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in
DVD-Video to AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound
than connection with RF cable only.
• VHF: 2 ~13 channels of TV
• UHF: 14~69 channels of TV
• CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station
and consumers. It does not need any antenna.
• In/Out jack in Audio/Video terminal:
- In : A jack used to receive signal required in this unit from other units.
- Out : A jack used to send signal of this unit to other units.
• Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use INPUT button in this REMOTE to select video mode.)
REAR PANEL OF TV
INPUT 1
INPUT 2
ANT IN
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents