Rear Panel Controls & Features - Ahuja DFX-16 Operation Manual

• Rear Panel Controls & Features
9 VAC~
POWER
8
8. POWER Socket
For connecting the 9V AC power
supply adaptor as supplied
alongwith.
9. BYPASS Jack Socket
For connecting an external foot
switch through a ¼" phone plug.
The foot switch is used to enable
or disable the presence of wet
(processed) signal at the output.
10. OUTPUT Jack Sockets
In mono applications, either of the
LEFT or RIGHT output jack sockets
can be connected to the Aux input
of a PA amplifier, Line input of a
direct coupled amplifier (when used
in mono mode), an I / O insert of a
mixer or the send / return of a
powered speaker.
In stereo applications, for
connecting to AUX RETURN
inputs of a mixing console, the
Line input of a direct coupled
amplifier (when used in stereo
mode) or the Line inputs of a two
zone amplifier.
BYPASS
LEFT
9
OUTPUT
RIGHT LEFT (MONO)
10
11. INPUT Jack Sockets
The LEFT (MONO) jack socket is
used for connecting signal
sources with mono outputs like an
AUX SEND (Post Fade) of a
mixer, the preamp output of a PA
mixer, an I / O insert of a mixing
console and the send / return of a
powered speaker.
When the mono input is
connected to LEFT (MONO) jack
socket only, then same signal also
gets routed to the RIGHT jack
socket internally.
In stereo applications, LEFT &
RIGHT inputs can be connected to
the two AUX SEND (Post Fade)
inputs of a mixing console or the L
& R LINE outputs of a mixer.
6
INPUT
RIGHT
11