Front Panel Controls & Features - Ahuja DFX-16 Operation Manual

0 10
INPUT
1
1. INPUT Volume Control
For adjustment of the signal level
being fed to the effects processor.
2. MIX Control
For adjustment of the desired mix
of dry (unprocessed) & wet
(processed) signal level available
at the output. At position 0, the
output signal comprises of only
dry signal. In order to raise the
level of wet signal, turn up the MIX
volume control to a desired
position.
3. OUTPUT Volume Control
For adjustment of the output
signal level from the effects
processor.
4. SIGNAL LED
The flickering of this LED indicates
the presence of acceptable levels
of input signal. But the continuous
glow of the SIGNAL LED indicates
that there is excessive signal
being fed to the input of the effects
processor, resulting in distorted
output.
• Front Panel Controls & Features
DFX-16
0 10 0
MIX OUTPUT
18bit Digital Effects Processor
2 3
SELECT
Rotary
Chorus/Rev
Flange/Rev
Delay/Rev
Delay
Flange
Chorus
10
Tremolo
SIGNAL
4
5. SELECT Switch
For selecting the desired program
settings out of the 16 preset
effects algorithms available from
DFX-16.
6. POWER LED
The glowing of this LED indicates
that the effects processor is ON.
7. VARIATIONS Switch
This rotary switch provides 16
different preset variations of time,
depth or regeneration for any of
the program selected.
5
VARIATIONS
Hall 1
Hall 2
16 1 2
Hall 3 15
Room 1
14
Room 2
13
Room 3
12
Plates 1
11
Plates 2 10
9
POWER
5 6 7
3
4
5
6
7
8