Step 1: Install The Cpu (Central Processing Unit); Step 1-1: Installation Kit Preparation - Gigabyte GA-8EGXDR-E User Manual

Step 1: Install the CPU (Central Processing Unit)

Step 1-1: Installation Kit Preparation

You may use the 4 screws which come with the mainboard to reinforce the support between P4 CPU
heat-sink on the mainboard and chassis.
Step1: The 4 new mounting holes on t h e chassis
are for additional support for P4 CPU heat-
sink on the mainboard.
Figure 1
Step 3: Preparing retention module kit.
Figure 3
Hardw are Installation Process
Step2: Apppearance of mainboard.
Figure 2
Step 4: Fit the 4 screws with 2 CPU
retention modules on the chassis. Push screw
into the motherboard firmly as shown below
Figure 4
9