Gigabyte GA-8EGXDR-E User Manual page 47

} Parallel Port Mode
This option specifies the parallel mode.
Normal The normal parallel pro is used.
8
Bi-Directional
Use this setting to support bi-directional transfers on the parallel port.
8
EPP The parallel port can be used with devices that adhere to the
8
enhanced Parallel Port ( EPP ) specifications. EPP uses the
existing parallel port signal to provide asymmetric bi-directional
data transfer driven by the host device.
ECP The parallel port can be used with devices that adhere to the
8
extended Capabilities Port specifications. ECP uses the DMA
protocol to achieve data transfer rate up to 2.5Mbit/s. ECP provides
the symmetric bi-directional communication. (Default value)
} Parallel Port IRQ
This option is to select Parallel Port IRQ
Option: 7 (Default Value) , 5
8
} Parallel Port DMA
This option iallows user to select Parallel Port DMA.
Option: 3 (Default Value) , 1
8
} USB Function
This option allows user to enable USB host controller.
Enable Enable USB host controller (Default Value)
8
Disabled Disable this function.
8
} USB Legacy Support
This option allows user to function support for legacy USB.
Enabled Enables support for legacy USB
8
Disabled Disables support for legacy USB (Default Value)
8
47
BIOS Setup