Zinwell ZWD-2500T Specifications

HD Video Wireless Kit Series
Transmitter
Receiver
ZWD-2500T
1 x HDMI out
2 x Componet in
2x HDMI in
Bring uncompressed 1080i
video content to your HDTV wirelessly !
Features:
Omnidirectional Antenna System for Maximum 70 feet (20 meter) LOS HD Video
Transmission Distance
High Performance and Small Form Factor internal antennas are Employed
Up to 1080p@24 Hz/30 Hz, 1080i@60 Hz Picture Quality
No Latency for Playing High Definition Video Game Console
256-bit AES Encryption for Securing Video Transmission over Wireless
IR Blasting
Auto Set-up, Plug & Play
Operates on the NON-DFS (Dynamic Frequency Selection)
frequencies with Automatic Frequency Selection, the system
EDID/ E-DDC 1.1
will automatically change frequency in case of interference
Support HDMI 1.3
with another RF system.
Support CEC
Transmitter Receiver
1 x HDMI in 1 x HDMI out
ZWD-2500T
HD Video Wireless Transmitter
Source Selection Button
Front View
Power Button
ZWD-2500T Rear View
HDMI IN
Audio L/R IN
Y/Pb/Pr IN
DC IN IR Blaster Extender Jack
ZWD-2201T
Channel Selection Button
Front View
Power Button
ZWD-2201T Rear View
IR Blaster Extender Jack
DC IN HDMI IN
General Specifications
Component Input 1080p @ 24/30 Hz, 1080i, 720p, 576p, 576i, 480p, 480i (ZWD-2201 excluded)
Supported Video Resolution
HDMI Input 1080p @ 24/30 Hz, 1080i, 720p, 576p, 480p
Analog Audio 48KHz and 24-bit Per Sample (ZWD- 2201 excluded)
Supported Audio Formats
Digital Audio up to 3.072 Mbps AC-3 and DTS
Transmission Range
LOS (line of sight): Maximum 70 feet (20 meter), depends on specific environment.
System Latency Less than 1 ms
Antenna Omnidirectional High Performance Internal Antennas
Operating Frequencies 4.9 ~ 5.9 GHz (non-DFS Frequency Bands) for US, EU, JP, TW
47 KHz (short range support 36KHz RC5/RC6 and 38KHz NEC and 56 KHz)
Supported IR Blasting Frequency
Power Supply 100 ~ 240V AC in, 5V/3A DC out Power Adaptor
Operating Temperature 0 ~ 40°C
Regulations FCC, CE, MIC, NCC
ZWD-2500T
Interfaces
HD Video Wireless Transmitter
A/V Interfaces Component Input Two Sets of RCA Connectors
Analog Audio L/R Input Two Sets of RCA Connectors
HDMI Input Two (Type A)
HDMI Output -
Control Signal Interfaces IR Sensor YES
IR Sensor Extender -
IR Blaster Extender 2.5 mm Jack
Power Power Input 5V DC Jack
Switches Front Power Switch YES (One Tack Switch)
Source Selection Switch YES (One Tack Switch)
-
Channel Selection Switch
LEDs Power LED 1* LED (Two-Tone: Blue & Red)
Source LED 4* Blue LEDs
Video Status LED -
-
Signal Strength Status
Dimensions 295(W)* 149(L)* 45.5(H) mm
Accessories
A pair of 100~240V AC in, 5V DC out Power Adaptors
HDMI Cable (1m)
Remote Control Unit w/ Battery (not included in ZWD-2201 package)
2009/04/20
ZWD-2500R RCU
HD Video Wireless Receiver
Source Selection Button
Front View
Power Button
ZWD-2500R
ZWD-2500T
Power Button Power Button
Source
Button
Channel Button
ZWD-2500R Rear View
DC IN HDMI OUT IR Sensor Extender Jack
ZWD-2201R
Channel Selection Button
Front View
Power Button
ZWD-2201R Rear View
DC IN HDMI OUT IR Sensor Extender Jack
ZWD-2500R ZWD-2201T ZWD-2201R
HD Video Wireless Receiver HD Video Wireless Transmitter HD Video Wireless Receiver
- - -
- - -
- One (Type A) -
One (Type A) - One (Type A)
YES YES YES
2.5 mm Jack - 2.5 mm Jack
- 2.5 mm Jack -
5V DC Jack 5V DC Jack 5V DC Jack
YES (One Tack Switch) YES (One Tack Switch) YES (One Tack Switch)
-
YES (One Tack Switch) -
-
YES (One Tack Switch) YES (One Tack Switch)
1* LED (Two-Tone: Blue & Red) 1* LED (Two-Tone: Blue & Red) 1* LED (Two-Tone: Blue & Red)
4* Blue LEDs - -
- 1* Blue LED 1* Blue LED
3* LEDs - 3* LEDs
180(W)* 140(L)* 39(H) mm 180(W)* 140(L)* 39(H) mm 180(W)* 140(L)* 39(H) mm
* Specifications are subject to change without notice.
Quick Start Guide
User's Manual
IR Sensor Extender Cable
IR Blaster Extender Cable
E-mail: d-sales@zinwell.com.tw