Alarm Tone; Setup Menu Tab - Humminbird 595C Operation Manual

FF595_Man_531385-1_A_PrfE.qxd

Alarm Tone

Alarm Tone selects the pitch of the alarm sound. A brief tone will
be produced as you adjust the Alarm Tone so that you can select the tone that you can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting.
(High, Medium, Low, Default = Medium)
58
12/9/2004 2:41 PM Page 64

Setup Menu Tab

From any view, press the MENU key twice to access the tabbed
Main Menu System, then press the RIGHT cursor key until the
Setup tab is selected.
NOTE: Menu choices will vary depending on system settings such
as whether the unit is set for Advanced User mode and what
accessories are attached to the unit.
NOTE:
Units - Temp
Units - Distance
Units - Speed
Language
Triplog Reset
Select Views
Select Readouts
Depth Offset
Temp Offset
Speed Calibration
Setup Menu
(International Models Only)
(Only if Temp/Speed is Connected)
(Only if Temp/Speed is Connected)
(International Models Only)
(Only if Temp/Speed is Connected)
(Advanced)
(Advanced, Sonar View Only)
(Advanced)
(Advanced)
(Advanced, Only if Temp/Speed Connected)
59