AEG SCS41800S0 User Manual page 48

48
4 mm
44 mm
x
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
x
Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cov-
er stops against the kitchen furniture.
Push the appliance in the direction of
2
the arrow (2) against the cupboard on
the opposite side of the hinge.
1
Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard
front-edge is 44 mm.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
between the appliance and the kitch-
en furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
Open the door. Put the lower hinge
cover in position.