Installation; Electrical Connection - AEG SCS41800S0 User Manual

46

INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
POSITIONING
Install this appliance at a location where
the ambient temperature corresponds
to the climate class indicated on the
rating plate of the appliance:
Cli-
mate
class
SN
N
ST
T

ELECTRICAL CONNECTION

Before plugging in, ensure that the
voltage and frequency shown on the
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
rating plate correspond to your domes-
tic power supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with cur-
rent regulations, consulting a qualified
electrician.
The manufacturer declines all responsi-
bility if the above safety precautions are
not observed.
This appliance complies with the E.E.C.
Directives.
DOOR REVERSIBILITY
The door of the appliance opens to the
right. To open the door to the left, do
these steps before you install the appli-
ance.
• Loosen and remove the upper pin.
• Remove the upper door.
• Remove the spacer.