Humminbird 531338-1_C Operation Manual page 54

Default 2D Sonar View
To Select Readouts:
1. Make sure you are in Advanced User Mode, highlight Select Readouts on the Setup
main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP
or DOWN Cursor Control keys to select a particular Readout position, then use the
RIGHT or LEFT Cursor Control keys to change what will be displayed at that position.
(Off, Speed, Temperature, Triplog, Voltage, Water Speed)
49
Customized 2D Sonar View