Triplog Reset (With Temp/Speed Or Gps Receiver); Restore Defaults - Humminbird 531338-1_C Operation Manual

Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed
Accessory is connected and the paddlewheel has moved at least once, or if a GPS Receiver is
connected. The Triplog provides the following information: timer for elapsed time, distance
traveled since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts to find out how to display Triplog information on
the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT
4-WAY Cursor Control key once more. To cancel Reset Triplog, press the LEFT 4-WAY
Cursor Control key.
To Restore Defaults:
1. Highlight Restore Defaults on the Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT
4-WAY Cursor Control key once more. To cancel Restore Defaults, press the LEFT 4-
WAY Cursor Control key.
47
Triplog Reset
(with Temp/Speed or GPS Receiver)

Restore Defaults

Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!