Working with the notebook
Installing a battery
► Position the battery at the edge.
► Insert the battery into the battery compartment until it engages positively (1).
► Slide the release button in the direction of the arrow (2).
► Complete the removal, see chapter
Module
Modules
Modulebay
The design of your notebook enables the flexible use of notebook batteries and drives. The
following modules can be operated in the module bay of your notebook:
•
Second battery
•
Second hard disk drive
•
DVD RW drive
•
Blu-ray BD-W drive
•
Weight Saver
•
LIFEBOOK Bay Projector
Only use modules designed for your notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the module bay.
You can swap modules during operation. This means you do not
need to switch off the notebook.
Log off the module via the corresponding symbol in the task bar.
The module can now be removed without any further actions being necessary.
34
2
"Finishing component removal", Page
1
70.
Fujitsu