Advertisement
D
I
EVICE
NSTALLATION
Step 1
Install the USB transmitter (29349, 29344, or 29348) by means of wall plate, if using wall plate style
transmitter, or connect the Dongle style transmitter to your computer.
Step 3
Using a pre-terminated Cat5/Cat5e/Cat6 cable or terminate your own cable to connect the USB
transmitter and USB Receiver Dongle.
Step 4
Plug your computer into the source end (USB transmitter end) using a standard USB A/B cable.
Step 5
Plug your USB enabled device into the USB Dongle Receiver using a standard USB A/B, A/mini-B or
proprietary USB cable that came with your device.
Step 6
Turn your computer/source on and you can begin to use your USB devices.
5
Advertisement
