Advertisement
I
NTRODUCTION
Thank you for purchasing the USB v1.1 Receiver Dongle. This device is one component of a complete
solution designed to conquer USB length limitations and put your USB 1.1 devices where you want them.
This solution extends the distance of a USB device to a host computer up to 150ft so you can place your
USB projector, camera, printer, or any other USB device exactly where you want it! The USB v1.1 Receiver
Dongle is powerful yet simple, with no drivers to install or special software required.
The transmitter/receiver pair is connected via standard Cat5, Cat5e, or Cat6 UTP cable allowing for easy
installation. The USB v1.1 Receiver Dongle is bus powered, so no external power source is needed. This
unit is designed to work with Cables To Go part numbers: 29349, 29344, or 29348. We recommend that
you read this manual thoroughly and retain for future reference.
2
Advertisement
