Table of Contents
Advertisement
Operating Your Camera
Notes
• Y ou cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
• W hen adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
DAY/NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the
Function Setup switch so that the arrow indicates 'DAY/NIGHT'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6.DAY/NIGHT
7.IMAGE ADJ
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
Please press the Function Setup switch to turn on or
off the burst signal on B/W mode.
AUTO : The mode is switched to 'Color' in a normal environ
ment, but it is switched to 'B/W' mode when
ambient illumination is low. To set up the switching
time for AUTO mode, press the Function Setup
switch.
22
COLOR DOME CAMERA
DC
ATW
OFF
ON
AUTO
User's Manual
- DWELL TIME : You can select the duration time about
changing the DAY/NIGHT mode.
→...5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
Notes
• Y ou cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is
At this time, the exchange between DAY mode and NIGHT mode operates as like
'
'
selecting
COLOR
mode.
• T he camera may focus less well under infrared illumination than under normal illumination.
IMAGE ADJ.
1. When the SETUP menu screen is displayed,
select 'IMAGE ADJ.' by using the Function
Setup switch so that the arrow indicates
'IMAGE ADJ.'
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
7.IMAGE ADJ
8.SPECIAL
V-REV : You can flip the picture vertically on the screen.
H-REV : You can flip the picture horizontally on the screen.
D-ZOOM : You can use a digital zoom of x2~x10.
SHARPNESS : As you increase this value, the picture
outline becomes stronger and clearer. Adjust
this value appropriately depending on the
sharpness of the picture.
COLOR DOME CAMERA
'
'
OFF
.
2. Select a desired mode using the Function
Setup switch.
IMAGE SETUP
1. V-REV
OFF
2. H-REV
OFF
3. D-ZOOM
OFF
4. SHARPNESS
ON
5. RETURN
23
User's Manual
Advertisement
Table of Contents
