1. Manuals
  2. Brands
  3. Deltaco Manuals
  4. DVR
  5. 4 Channel
  6. User manual

Deltaco 4 Channel User Manual

4/8/16ch triplex dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4/8/16CH Triplex DVR
User Guide
.
INFORMATION MAY CHANGE WITHOUT NOTICE
Digital Video Recorder

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4 Channel and is the answer not in the manual?

Questions and answers

Related Manuals for Deltaco 4 Channel

Summary of Contents for Deltaco 4 Channel

  • Page 1 4/8/16CH Triplex DVR User Guide INFORMATION MAY CHANGE WITHOUT NOTICE Digital Video Recorder...

  • Page 2: Table Of Contents

    4/8/16CH Triplex DVR Table of Contents Product Overview..................7 Product Outline ...................8 Front Panel....................8 3.1. The slim model (4/8CH DVR) .............8 3.2. The removable drive (CD-ROM/DVD-ROM) model (4/8CH DVR) ..9 3.3. 16CH DVR....................9 Rear Panel....................11 IR Remote Controller ................13 Install the disk drives................15 1.1.
  • Page 3 4/8/16CH Triplex DVR 8.1. 4 CH Triplex DVR ................26 8.2. 8 CH Triplex DVR ................26 8.3. 16 CH Triplex DVR ................26 Commands....................28 1.1. Operating Buttons ................28 1.2. Mouse Operating ................28 1.3. State Information ................29 1.4. Icons ....................29 Main Menu....................31 Channel Setup ...................32 3.1.
  • Page 4 4/8/16CH Triplex DVR 7.2. Hard Drive Setup ................47 7.3. Network Setup ..................48 7.4. Screen Setup..................52 7.5. Audio Setup ..................53 7.6. Keyboard/PTZ Setup ................53 7.7. Firmware Update ................55 7.8. Load Default Setting.................56 Language Selection ..................57 Exit Main Menu ..................57 9.1. Exit & Save Changes................57 9.2.

  • Page 5: Playback

    4/8/16CH Triplex DVR Name Server ....................81 PC Capturing .....................82 Playback.....................84 Digital Video Recorder...

  • Page 6: C A U T I O N

    4/8/16CH Triplex DVR For your safety, unplugging the power before moving the DVR, installing, or replacing any parts or hard drive. Make sure all the power cable and wires are properly set up before using the DVR. To avoid a short circuit, don’t leave any unnecessary parts inside the DVR. Please avoid dramatic changes of the environment, such as dust, temperature, and humidity.

  • Page 7: I N T R O D U C T I O N

    4/8/16CH Triplex DVR 1. Product Overview High quality pictures by digital recording with 4/8/16 video inputs (NTSC/PAL) Provides one VGA and S-video/video-in*2 for video output and two audio inputs Triplex operations : Recording / Playback / Remote Backup Two compressive modes: MJPEG (recording) / MPEG4(networking) Individual recording frame rate setting for each channel, from 1fps to real time Individual recording mode by Continuous, Schedule, Sensor/Motion Trigger that setting for each channel.

  • Page 8: Product Outline

    4/8/16CH Triplex DVR Dimension(Width x Height x Depth): 290x52x220mm (4/8CH DVR with one 3.5”HDD) 340x60x280mm (4/8CH DVR with Removable HDD+3.5”HDD) 430x80x320mm (16CH DVR) Display/Recording frame rate and resolution: Models 4CH DVR 8CH DVR 16CH DVR Display Frame Rate 120/100fps 240/200fps 480/400fps 60(NTSC)/50(PAL)fps 60(NTSC)/50(PAL)fps 120(NTSC)/100(PAL)fps Recording Frame Rate...

  • Page 9: The Removable Drive (Cd-Rom/Dvd-Rom) Model (4/8Ch Dvr)

    4/8/16CH Triplex DVR (Type III) 3.2. The removable drive (CD-ROM/DVD-ROM) model (4/8CH DVR) -with one front-accessible disk drive (or CD-ROM/DVD-ROM) and one internal HDD 3.3. 16CH DVR Controls: Name Function Backward search through a time-shifted or recorded video. PLAY/PAUSE Start / Pause video playback or Enter Play menu Forward search through a time-shifted or recorded video.
  • Page 10 4/8/16CH Triplex DVR Moves up through the list of menu. Also used to select menu options or change the DVR configuration values. Or Enter Event Search Menu. DOWN Moves down through the list of menu. Also used to select menu options or change the DVR configuration values. SELECT/ENTER Use this button to change values on main menu or sub menu setting.

  • Page 11: Rear Panel

    4/8/16CH Triplex DVR 4. Rear Panel 4 CH Triplex DVR (with Removable Disk Drive) 4 CH Triplex DVR (without Removable Disk Drive) 8 CH Triplex DVR (with Removable Disk Drive) Digital Video Recorder...
  • Page 12 4/8/16CH Triplex DVR 8 CH Triplex DVR (without Removable Disk Drive, without Sensor/Alarm) 16 CH Triplex DVR Function IR Extender connector (Optional) VGA Display Connector (DB-9) AUDIO-IN POWER ON/OFF Switch USB PORT (dedicated Only for Mouse Connection, must connect at the beginning of Power On) S-VIDEO VIDEO OUT (Monitor)

  • Page 13: Ir Remote Controller

    4/8/16CH Triplex DVR 5. IR Remote Controller DVR Mode Button / Name Function Start or stop recording / backup. Switch to DVR mode Switch to PTZ mode Backward search through a time-shifted or recorded video. STOP Stop playback or backup. II PAUSE Pause recording or playback.
  • Page 14 4/8/16CH Triplex DVR PTZ Mode Button / Name Function N/A. Switch to DVR mode Switch to PTZ mode Move Left. STOP N/A. II PAUSE N/A. Move Right ► PLAY Line Scan MENU Exit menu or switch to DVR. ▲(UP)/ ▼(DOWN)/ Moves up/down/left/right through the list of menus.

  • Page 15: I N S T A L A T I O N

    4/8/16CH Triplex DVR Be sure there is no power connection before starting installation! 1. Install the disk drives There are two spaces for disk drives installation on the DVR: One front accessible R/W CD-ROM/DVD-ROM (or removable HDD drive) and one internal 3.5” hard drives with IDE (default) or SATA interface.
  • Page 16 4/8/16CH Triplex DVR Step2: Fix the hard drive The Slim Model (4/8 CH DVR) Put the HDD into the HDD bracket and fixed two screws on each side. Plug in the HDD cable and power line for using. The removable drive (CD-ROM/DVD-ROM) model (4/8CH DVR) Unscrew two screws HDD bracket near to the front panel.

  • Page 17: Install The Internal Disk Drives (Sata Interface) For 4/8Ch Dvr

    4/8/16CH Triplex DVR 1.3. Install the internal disk drives (SATA interface) for 4/8CH DVR It needs an IDE to SATA Bridge (Optional) to transfer IDE interface into SATA before starting to install the hard disk, Step 1: Place the IDE to SATA Bridge into DVR main unit. Unscrew three screws on DVR’s rear panel.
  • Page 18 4/8/16CH Triplex DVR Step 3: Make sure the jumpers on IDE to SATA bridge (JS2) have been set to P1,2-short and P3,4-short as following Step 4: Unscrew two screws HDD bracket near to the front panel. Slide it forward to rear side to take the HDD bracket and install 3.5” HDD drives on the top Then, Put the chassis’s cover back Digital Video Recorder...

  • Page 19: Install The Internal Disk Drives For 16Ch Dvr

    4/8/16CH Triplex DVR 1.4. Install the internal disk drives for 16CH DVR 16CH DVR provides PATA (IDE) and SATA interface both. Put the HDD into HDD bracket and fix it by screws. Then, install the whole HDD set into DVR. <For two HDD installation>...

  • Page 20: Usb Connector On Rear Panel

    4/8/16CH Triplex DVR 2. USB connector on rear panel USB connector on rear panel is dedicated for USB mouse using. Do not connect to any other USB device except the mouse. 3. Camera connections There are 4/8/16 channels for cameras’ connections named CH1, CH2, CH3 …. CH16. Each camera has two wirings basically: BNC and Power.

  • Page 21: Rs485/Rs232 Selection

    4/8/16CH Triplex DVR 4. RS485/RS232 Selection The DVR provide one com port. It can be selected to RS232 or RS485 by setting the jumper on the main control board. 4.1. 4 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS1: the jumper setting to select RS485 or RS232 as following figure.

  • Page 22: Ch Triplex Dvr

    4/8/16CH Triplex DVR 4.2. 8 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS1: the jumper setting to select RS485 or RS232 as following figure. 4.3. 16 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS3: jumper setting to select RS485 or RS232 as following figure.

  • Page 23: Video Format Selection

    4/8/16CH Triplex DVR 5. Video Format Selection The DVR accepts two video formats: NTSC and PAL. It can be select by setting the jumper on the main control board. 5.1. 4 CH Triplex DVR Open the top cover as mentioned; there is a main control board with JS2: the jumper setting to select NTSC or PAL for video format as following figure.

  • Page 24: Cablings

    4/8/16CH Triplex DVR 6. Cablings Before starting to use, you have to connect all the peripherals like LCD display, cameras … as following figure: 6.1. 4 CH Triplex DVR 6.2. 8 CH Triplex DVR 6.3. 16 CH Triplex DVR Digital Video Recorder...

  • Page 25: Sensor Installation

    4/8/16CH Triplex DVR 7. Sensor Installation The DVR unit can be connected up to 4/8/16 sensor inputs as following figure. Each sensor has two lines: signal and ground in order to sense the sensor’s status. 7.1. 4 CH Triplex DVR 7.2.

  • Page 26: Alarm Installation

    4/8/16CH Triplex DVR 8. Alarm Installation The DVR unit provides one alarm (speaker) signal. Please refer to following figure. 8.1. 4 CH Triplex DVR 8.2. 8 CH Triplex DVR 8.3. 16 CH Triplex DVR Digital Video Recorder...

  • Page 27: S T A R T U P T H E D Vrs R S Y S T E M

    4/8/16CH Triplex DVR After the unit is properly installed, the DVR unit is ready to record and play. Then apply power by turn on the power switch. After the unit is powered on, the unit will check HDD for several seconds, and then the unit will enter into real-time display mode shown as the following screen: Digital Video Recorder...

  • Page 28: Commands

    4/8/16CH Triplex DVR 1. Commands 1.1. Operating Buttons : Press it to enter the main menu or and exit the menu. ( / ): Up / Down – To move up/down through the list of menu. Also used to select menu options or change the DVR configuration values. : Left/Right –...

  • Page 29: State Information

    4/8/16CH Triplex DVR 1.3. State Information There are state informations on the upper of the screen to show the system status . : Camera on line. : Camera signal loss : Recoding : Stop Recording : Network acting : Network no connection : USB disk : CD / CDRW : HDD Status...
  • Page 30 4/8/16CH Triplex DVR : : 4 Split View (4ch dvr) : : 9 Split View (8ch dvr) : 16 Split View (16ch DVR) : Auto channel rotation (from 1~4 /1~8 /1~16) : Start recording : Stop recording : Enter Main menu : Play menu(Playback), To play the recorded data.

  • Page 31: Main Menu

    4/8/16CH Triplex DVR 2. Main Menu Press to enter the “main menu”, it will show the password input inquiry as following. / { / ) and ↵) Please enter six numbers by controls on front panel (by using the buttons (number 1~16) on IR remote. Default password is “123456”., To escape this menu by only using USB mouse ESC/Discard After enter the main menu password, it goes into the main menu for DVR setup...

  • Page 32: Channel Setup

    4/8/16CH Triplex DVR 3. Channel Setup Press to enter the “Channel setup” as following. (4CH DVR) (8CH DVR) (16CH DVR) 3.1. Channel Number To select or specify the channel for displaying/recording. ” ” (default) (Full screen mode): you can view / record all channels (4 or 8 or 16) on the screen of full-screen.

  • Page 33: Record Channel

    4/8/16CH Triplex DVR 3.3. Record Channel To set the channel been selected at “Channel Number” to be recorded or not. “ON” – recording, “OFF”- No recording. It can be setup each channel separately by choosing the dedicated channel at “Channel Number”. Or to choose ” ”...

  • Page 34: Record Setup

    4/8/16CH Triplex DVR 4. Record Setup Press to enter the “Record setup” as following. (4/8CH DVR) (16CH DVR) 4.1. Auto Record To setup the recording time period by 0sec(OFF), 10sec, 20sec, 30sec, 40sec, 50sec or 60sec. Auto record will help you to re-start the recording automatically in case of abnormal shut down.

  • Page 35: Record Schedule

    4/8/16CH Triplex DVR (16CH DVR) 4.4.1. Auto Balance To setup all channel recording frame rate and keep each channel’s frame rate in balance, Default is “OFF”. When Trigger mode is ON, the active channel has been detected will occupy all record frame rate if Auto Balance set as “ON”. 4.4.2.
  • Page 36 4/8/16CH Triplex DVR ♦ Channel Number To setup the channel recording schedule. ”: All channels will be set at the same recording schedule. ” “1,2,3,4” or “1,2,3,4,5,6,7,8” or “9,10,11,12,13,14,15,16”: To setup each channel recording schedule. ♦ Recording Mode Select There are five recording modes for selection: None, Time, Motion, Sensor and Motion&Sensor.
  • Page 37 4/8/16CH Triplex DVR ♦ Recording Schedule “ / ( / )” : To move left or right. “ ” :To select the mode. ( / )”: To move up or down. “ To set all 7-days /24hous at the same configuration by select “ ” For example, choose “Motion”...

  • Page 38: Detector Setup

    4/8/16CH Triplex DVR To set any time (by hour) for each day, just move to the desired daytime and select after setting the desired recording mode For example, “Motion” mode at Sunday 19:00~24:00 and Tuesday 2:00~4:00 as following 5. Detector Setup This menu is to adjust the motion detection sensitivity of each channel 5.1.

  • Page 39: Video Loss Alarm

    4/8/16CH Triplex DVR 5.2. Video Loss Alarm To select or specify the channel for detection. “Mute”: No beep whatever video loss or not. Buzzer-Short”: Beep shortly by buzzer on main board when video loss. “ Buzzer-Long”: Beep long by buzzer on main board when video loss. “...

  • Page 40: Sensor Setup

    4/8/16CH Triplex DVR 5.3.5. Trigger Full Screen To display the trigger channel on full screen when it act as 1sec, 2sec … or 30sec. OFF”: It will not display on full screen when the channel has been “ triggered. Also, the trigger area will turn to “red-color” 5.3.6.
  • Page 41 4/8/16CH Triplex DVR 5.4.1. Sensor Mode Set the sensor mode as “Not Installed”, “Normal-Open” or “Normal-Close”. 5.4.2. Record Time To set the sensor’s record time as 5sec, 10sec, 15sec, 20sec, 25sec, 30sec, 45sec, 60sec, 90sec, 120sec, 150sec or 180sec. 5.4.3. Alarm Mode To set the motion detector alarm mode.

  • Page 42: System Setup

    4/8/16CH Triplex DVR 6. System Setup To set up the Password, time, date and button beep…etc. 6.1. Query Error Message The listing of DVR error message. ＂: Show error message with time. “ ” : Clear all error messages. “ 6.2.
  • Page 43 4/8/16CH Triplex DVR 6.2.1. Icon Help “ON” - Icon help will be shown, “OFF” –Icon help will not be shown Please refer to 1.5 Icons for more detail information 6.2.2. Error Message Information “ ON” - Save/display the error message OFF”...

  • Page 44: Date/Time Setup

    4/8/16CH Triplex DVR : Channel Number : Recording status : Video Signal Status : Detection mode and status (Flash if sensor has been triggered) : Alarm Active : Buzzer active 6.3. Date/Time Setup To setup the date and time 6.3.1. Date View Mode To display the date/time format on state information by DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD.

  • Page 45: Button Beep Setup

    4/8/16CH Triplex DVR 6.3.3. Time Zone Set the time zone where you are located. 6.3.4. Daylight Saving Time Set daylight saving time period by specify the Month, Week, Day and Hour 6.3.5. NTP Server Synchronize DVR day/ time to NTP server through internet. ♦...

  • Page 46: Input Device Setup

    4/8/16CH Triplex DVR 6.5. Input Device Setup To setup the speed of input device: mouse, mouse repeat, keypad and IR remote as Slow, normal or fast 6.6. Auto Exit Menu To setup the time period to exit menu automatically by choose “OFF” (not exit unless pressing “...

  • Page 47: Hard Drive Setup

    4/8/16CH Triplex DVR “II ”: To create a new account. “ ”: To delete account. “ ( ), ( )” Set account within certain limits by set it as “ ”as permitted or no permitted as “X” (Account Active): The account is active (Account Disable): The account is not active Account ID (account name): Enter characters as account ID Passwd (Password): By entering six characters or numbers as password.

  • Page 48: Network Setup

    4/8/16CH Triplex DVR 7.2.3. Master Hard Disk The Mater hard drive Information in summary Model: Model of master hard drive. Record Begin Time: The starting day/time of hard drive recording Record End Time: The latest day/time of hard drive recording Standard Record Size: The recorded Capacity / Total hard drive capacity by Mega-byte.
  • Page 49 4/8/16CH Triplex DVR 7.3.2. Accept Client “ YES” to enable the network client function. “X NO” means there is no network client available. 7.3.3. Video Transmission Quality Setup the quality of Video Transmission as High, Normal or Low. 7.3.4. Audio Transmission “...
  • Page 50 4/8/16CH Triplex DVR ♦ MAC Address: It is a number that acts like a name for a particular network adapter. It has been set at dedicated address even reset the DVR. 7.3.7. Server Setup ♦ Default DNS Address: The Domain Name system (DNS) translate hostnames to IP addresses (default setting).
  • Page 51 4/8/16CH Triplex DVR ♦ Dynamic DNS: Dynamic DNS is a system which allows the domain name data held in a name server to be updated in real time. “Service Active”: Enable the Dynamic DNS service. “Provider”: The web site / IP Address of Dynamic DNS provider “Server Name”: To define a name of Dynamic DNS “Account”: The account name of Dynamic DNS “Password”: Password for Dynamic DNS...

  • Page 52: Screen Setup

    4/8/16CH Triplex DVR 7.4. Screen Setup 7.4.1. Screen Border “ ON” : To enable the border, “X OFF”: To disable the screen border. 7.4.2. Video Adjustment Adjust the whole picture to right/left or up/down by press / ( / ) ( / ).

  • Page 53: Audio Setup

    4/8/16CH Triplex DVR 7.5. Audio Setup To setup the audio status including of audio record, audio mute, input volume and output volume. 7.5.1. Audio Record “ ON”: Enable audio recording. “X OFF”: Disable audio recording 7.5.2. Audio Mute “ ON”: Switch on the audio function “X OFF”: Switch off the audio function 7.5.3.
  • Page 54 4/8/16CH Triplex DVR 7.6.1. Pan/Tilt/Zoom Setup “Channel Number”: Dedicated the PTZ camera channel “PTZ Protocol”: Select PTZ camera’s protocol as Pelco P, Pelco D, Teleview Pelco P, Teleview Pelco D, Merit LILIN (3B), Merit LILIN (7B), HiSharp, Nicecam and Elitar. “Camera ID”: Setup the ID of PTZ camera (meet camera’s local setting) “Camera Reset”: To reset PTZ camera “Speed Adjustment”: To adjust Pan/Tilt/Auto Pan/ Line Scan Speed.

  • Page 55: Firmware Update

    4/8/16CH Triplex DVR 7.7. Firmware Update To update or upgrade the DVR firmware by USB disk.. Plug the USB disk into USB port on DVR front panel Plug the USB disk into USB port on DVR front panel After plug in USB disk, it shows” Read file Information” on the button line If something mistake for USB disk or file, it will show: File not found or Disk Error on the button line.

  • Page 56: Load Default Setting

    4/8/16CH Triplex DVR When DVR is updating the firmware, it shows “Firmware is updating, Please wait” as following figure: After firmware update is completed, it will show: Firmware update is success, System will restart ----“ and restart DVR with the same configuration at previous version firmware does.

  • Page 57: Language Selection

    4/8/16CH Triplex DVR 8. Language Selection Multilingual supports with English, Traditional Chinese, Spanish, Russian, Italian, German, Ukrainian, Hungarian and Turkish. 9. Exit Main Menu To exit menu and save / discard the changes. 9.1. Exit & Save Changes To Exit menu and save all configuration changes. 9.2.
  • Page 58 4/8/16CH Triplex DVR Press “ ” (or “ ”) button or icon to enter Play menu ♦ HardDrive Select: To select or specify which hard drive’s data will be playback. ♦ Channel Select: To setup or specify which channel’s data will be playback ♦...
  • Page 59 4/8/16CH Triplex DVR Commands and Recorded Data status: ♦ S/N of Recorded Data: Series Number of recorded data provide by system ♦ Recording Configuration : The beginning / end of recorded data. : The dedicated hard disk data : The recording mode : The data can be play.

  • Page 60: D A T A B A C K U P B Y Usb Sb

    4/8/16CH Triplex DVR Press “ ” (or “ ”) button to enter the Play menu. ♦ HardDrive Select: To select or specify which hard drive’s data will be backup Use “ ( / )” button and move to the dedicated recorded data that you want to backup Press”...

  • Page 61: Backup By Cdrw

    4/8/16CH Triplex DVR You can change the time period of recorded data for backup by setting the “Start Time” and “End Time” and plug in the USB disk. The “Free Capacity”, “Estimate Time”, ”Backup Period” and “Backup Size” will be changed automatically.

  • Page 62: E V E N T S E A R C H

    4/8/16CH Triplex DVR Press “ ” (or “ ”) button or icon to enter Event search menu ♦ HardDrive Select: To select or specify which hard drive’s event will be search. ♦ Channel Select: To setup or specify which channel’s event will be search. ♦...

  • Page 63: P T Z

    4/8/16CH Triplex DVR Press “ ” button or icon to enter Pan/Tile/Zoom Control menu Operating Icons: Icon Command Enter PTZ channel menu shown on the right side of screen. (if channel number in Yellow-color, it performs as PTZ camera) Enter PTZ control menu shown at the bottom of screen. Move Right Move to Top Right Move Top...
  • Page 64 4/8/16CH Triplex DVR Command Preset (1 ~32) (Mouse-Left Button): Call Preset (Mouse-Right Button): Setup Preset Position (Mouse-Right Button 2sec): Clear Preset Position : Auto Pan Start : Auto Pan Stop : Line Scan Start : Line Scan Stop :Set Left Limit (Line Scan) : Set Right Limit (Line Scan) : Auto Iris, : Iris Open...

  • Page 65: P C C O N N E C T I O N T H R O U G H L O C A L A R E A N E T W O R K ( N E T W O R K H U B )

    4/8/16CH Triplex DVR 1. Search Router IP Address Please click “Start” and then “Run” option under Windows. Please enter “CMD” and then “OK” Please enter “ipconfig” on DOS prompt, and then record the Address Number of Default Gateway as shown: It is the Router’s IP Address. •...
  • Page 66 4/8/16CH Triplex DVR The suggested IP Address is from 192.168.11.160 to 192.168.11.199. Please search IP Address that is not being used at present. Please enter “ping 192.168.11.188” on DOS prompt (as following figure for reference) If it appears “Request timed out” messages that means this IP address is not being used at the moment and can be used for the DVR If it appears “Reply from 192.168.11.188: bytes=32 time<10ms TTL=128”...

  • Page 67: Ddns Service

    4/8/16CH Triplex DVR 2. DDNS Service For DVR only can set at static IP address and no support the dynamic IP. If you have to use dynamic IP that it recommend serving as DDNS service. DDNS is a service the maps internet domain names to IP address and works with dynamic IP address (assigned by ISP server).
  • Page 68 4/8/16CH Triplex DVR After you click "Create Account", it shows “Account Created”. Also, DynDNS will create a new account for you and send you an e-mail to the address you provided. It needs to confirm your account within 48 hours after receiving the e-mail or it will automatically delete your account.

  • Page 69: Logged In And Host Service

    4/8/16CH Triplex DVR 2.3. Logged In and Host Service Login by enter the Username and password. Then, go to “My Service” to get a host name Double click “Add New Hostname” as following: Digital Video Recorder...

  • Page 70: Router Setting

    4/8/16CH Triplex DVR Specify the Hostname for DDNS IP which will be applied to the DVR’s DDNS setting. We take DVR-HOST.dyndns.biz as an example, and click “Create Host” Now, the DDNS service is completed. Well keep the User name, Password and Hostname 2.4.

  • Page 71: Dvr Ddns Setting

    4/8/16CH Triplex DVR 2.5. DVR DDNS Setting After complete the DDNS account application, go to DVR server setup menu and input the DDNS information for network connection. 2.6. PC Client Setting Enter the “Option” at PC Client to setup Network Options-DDNS configuration. Digital Video Recorder...

  • Page 72: P C C L I E N T & P C Cv I E W E R

    4/8/16CH Triplex DVR & & PC Client is applied for remote monitoring, recording, playback, backup and control of 4/8ch video and 1ch audio. Also, you can capture, convert the video from the unit into AVI file or JPEG file, or play the stored video later on. PC Viewer is developed for viewing recorded video, taking snapshot and converting video to AVI format on PC which supports Windows2000/Windows XP/VISTA 1.

  • Page 73: Open Disk Operating In Vista

    4/8/16CH Triplex DVR 3. Open Disk Operating in VISTA It must setup PC Viewer / PC Client properties at VISTA operating system when you want to open disk including of Hard drive and USB disk before start running. Step 1: Go to PC Viewer Properties setting…….. Choose “...

  • Page 74: Pc Viewer Operating Guide

    4/8/16CH Triplex DVR 4. PC Viewer Operating Guide By press “Player” to act the operating at PC Viewer operating environment. 4.1. PC Viewer Operating buttons & Operating mode Name Function Open file. To retrieve the desired video data. Open Fast Backward Press to play backward faster.
  • Page 75 4/8/16CH Triplex DVR Still capture click to snapshot the data as BMP file To display each channel on full-screen Mode (Full) To display 4/8/16channels on screen(16ch DVR) Mode (16ch) To display 4/8channels on screen(8ch DVR) Mode (8ch) To display 4channels on screen(4ch DVR) Mode (4ch) Speaker Set Speaker On / OFF.

  • Page 76: Playback

    4/8/16CH Triplex DVR 4.2. Playback 4.2.1. Open File After local recording, you can simple to playback the recorded file by using “Open File” function as following. The default path of local recording is C:\Capture. Or you can change the path under hierarchical menu: “Option” Mouse Remote Control: To enable/discard the mouse operating on DVR when you use mouse operation at Client site.

  • Page 77: Capture

    4/8/16CH Triplex DVR 4.2.2. Open Disk Plug the USB memory stick with data backup into PC. Press the right button of mouse, and then choose “Open Disk” to select the USB disk. Then, press “OK” to start playback the data in USB (Removable Disk) 4.3.

  • Page 78: Pc Client Operating Guide

    4/8/16CH Triplex DVR 5. PC Client Operating Guide Press “Client” button on the top to switch PC Client mode for remote motoring. The operating picture will change as following. 5.1. Connect PC Client to DVR Press “Client” on the top and press left button of mouse, it shows a function table. Or simply press the “...

  • Page 79: Status Information

    4/8/16CH Triplex DVR Select “Connect” by one click it will show a window “Login” to set the IP address and port of DVR. IP Address / Port: The DVR IP address/Port is the IP address of the remote DVR that you can connect by static IP address or dynamic IP. Password: The password is the same password that be used for formatting the DVR Hard Drive.

  • Page 80: Control Icons

    4/8/16CH Triplex DVR 5.3. Control Icons After connected, DVR can be controlled on remote site by control icons. Name Function Connect/Disconnect the network within PC and DVR Channel Mode: To display 4 split screen Channel Mode: To display 9 split screen Channel Mode: To display 16 split screen Channel 1display at full screen (4ch DVR) To display Channel1, channel2…..

  • Page 81: Name Server

    4/8/16CH Triplex DVR Channel 4 display at full screen (4ch DVR) 4 split view the Channel5 ~ channel8 (8ch DVR) 9 split view (ch1~ch8 / ch9~ch16) display at full screen for 16ch DVR To display Channel9, channel10….. channel16 by sequencing on screen (16ch DVR) Enter menu or exit MENU Moves up through the list of menus or enter Search Manu...

  • Page 82: Pc Capturing

    4/8/16CH Triplex DVR It can be switched to PC Client mode for remote motoring just choose the idea DVR by double click. 7. PC Capturing Before use PC Capturing, please make sure K-Lite Codec Pack has already existed. You can refer to http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm or Insert the CD that DVR to choose “Download K_lite_codec”...
  • Page 83 4/8/16CH Triplex DVR Press “AVI” on the top to capture video that is synchronous with DVR and save as a file on PC. Before PC starting to capture video from DVR, it asks will it lower down the internet speed. Also, you can setup the directory for file saving.

  • Page 84: Playback

    4/8/16CH Triplex DVR 8. Playback To operate the Playback function by playback control buttons at the bottom of the screen. Pause the video playback I I Pause Fast Backward Press to play backward faster. Playback Start video playback Fast forward Press to play the recorded stream faster.

  • Page 85: R E M O T E S U R V E I L A N C E T H R O U G H I E B R O W S E R

    4/8/16CH Triplex DVR You can remote control the DVR unit through IE Browser Before starting to IE Browser, please make sure Active-X has already existed. You can install Active-X from CD as attached. Or start up IE Explorer with dedicated DVR IP address to URL, please refer to 7.3.6 IP Address Setup.
  • Page 86 4/8/16CH Triplex DVR Menu Control Name Function 0,1,2,----9,A,B,…F Numbers (0,1,2~9) and characters (A,B,…,F) for inputs ENTER Input Confirm / change values on main /sub menu setting. MENU Enter menu or exit. Moves right / Channel change ＋ Moves left / Channel change －...
  • Page 87 4/8/16CH Triplex DVR Play Control Name Function << REW Backward search through a time-shifted or recorded video. STOP Stop playback or backup. II PAUSE Pause recording or playback. ► PLAY Start video playback. ● REC Start or stop recording/backup. FF >> Forward search through a time-shifted or recorded video.

This manual is also suitable for:

8channel16 channel

Table of Contents