Page 1 Compass 2 0 1 2 O W N E R ’ S M A N U A L...
Page 2 With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of fea- Chrysler Group LLC shall be deemed to be deleted and the tures and equipment that are either standard or optional on name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....7 Rollover Warning .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
Page 7: How To Use This Manual
INTRODUCTION 5 control. Failure to operate this vehicle safely may result seat belts could cut the highway death toll by 10,000 or in a collision, rollover of the vehicle, and severe or fatal more each year and could reduce disabling injuries by injury.
Page 8 6 INTRODUCTION...
Page 9: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Vehicle Security Alarm — If Equipped ..18 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Illuminated Approach — If Equipped ..22 ▫ Child-Protection Door Lock System — Rear Doors ......34 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Automatic Locking Retractor Mode (ALR) — ▫ Air Bag Deployment Sensors And Controls . . . 67 If Equipped ......53 ▫...
Page 14: Things To Know Before Starting Your Vehicle
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission).
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: If you try to remove the key before you place the shift lever in PARK, the key may become trapped tem- porarily in the ignition switch cylinder. If this occurs, place the shift lever in PARK, rotate the key to the right slightly, then remove the key as described.
Page 16: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) CAUTION! • Allowing children to be in a vehicle unattended is An unlocked car is an invitation to thieves. Always dangerous for a number of reasons. A child or remove the key from the ignition and lock all the others could be seriously or fatally injured.
Page 17: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 SENTRY KEY seconds for a bulb check. If the light remains on after the The Sentry Key Immobilizer System prevents unauthor- bulb check, it indicates that there is a problem with the ized vehicle operation by disabling the engine.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All of the keys provided with your new vehicle have procedure. This procedure consists of programming a been programmed to the vehicle electronics. blank key to the vehicle electronics. A blank key is one that has never been programmed.
Page 19: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 3. Insert the second valid key into the ignition switch. Repeat this procedure to program up to eight keys. If you Turn the ignition switch to the ON/RUN position within do not have a programmed Sentry Key , contact your 15 seconds.
Page 20: Vehicle Security Alarm - If Equipped
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE SECURITY ALARM — IF EQUIPPED 3. The Vehicle Security Light in the instrument cluster This Vehicle Security Alarm monitors the doors, liftgate, will flash rapidly for approximately 16 seconds. This and ignition switch for unauthorized operation. shows that the Vehicle Security Alarm is arming.
Page 21: To Disarm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Disarm The System Security Alarm will arm unexpectedly. If you remain in Press UNLOCK on the RKE transmitter, or insert the key the vehicle and lock the doors with the RKE transmitter, into the ignition switch and turn the ignition switch to once the Vehicle Security Alarm is armed (after 16 sec- the ON/RUN position.
Page 22: Remote Keyless Entry (Rke) - If Equipped
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter.
Page 23: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 • For vehicles not equipped with the EVIC, perform the To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE following steps: transmitter once to unlock the driver’s door, or twice 1.
Page 24: Illuminated Approach - If Equipped
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Security Alarm activated will cause the alarm to sound. To Lock The Doors And Liftgate Press the UNLOCK button to deactivate the Vehicle Press and release the LOCK button on the RKE transmit- Security Alarm.
Page 25: Flash Lights With Remote Key Lock/Unlock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following steps: ter while you are in the vehicle will activate the Vehicle Security Alarm.
Page 26: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Alarm activated will cause the alarm to sound. Press the following steps: UNLOCK button to deactivate the Vehicle Security Alarm. 1. Press and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than Using The Panic Alarm 10 seconds.
Page 27: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Programming Additional Transmitters If your RKE transmitter fails to operate from a normal Refer to Sentry Key “Customer Key Programming.” distance, check for these two conditions: If you do not have a programmed RKE transmitter, 1.
Page 28: Remote Starting System - If Equipped
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. If the RKE transmitter is equipped with a screw, 2. Remove and replace the battery. Avoid touching the remove the screw. With the RKE transmitter buttons new battery with your fingers. Skin oils may cause facing down, use a flat blade screwdriver to pry the two battery deterioration.
Page 29: How To Use Remote Start
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • RKE PANIC button not pressed NOTE: • The vehicle must be equipped with an automatic • System not disabled from previous remote start event transmission to be equipped with Remote Start. •...
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Start Abort Message On Electronic Vehicle To Enter Remote Start Information Center (EVIC) — If Equipped Press and release the REMOTE START button The following messages will display in the EVIC if the on the RKE transmitter twice within five sec- vehicle fails to remote start or exits remote start prema- onds.
Page 31: To Exit Remote Start Without Driving
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The 15-minute cycles) with the RKE transmitter. However, Vehicle the ignition switch must be cycled to the ON/RUN Press and release the REMOTE START button one time, position before you can repeat the start sequence for a or allow the engine to run for the entire 15-minute cycle.
Page 32: Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an Use the manual door lock knob to lock the doors from accident, lock the vehicle doors as you drive as inside the vehicle.
Page 33: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: To prevent from locking the key in the vehicle, WARNING! (Continued) the power door lock switch will not operate when the key • Do not leave the key fob in or near the vehicle, and is in the ignition and either front door is open.
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Auto Lock Doors — If Equipped The auto door lock feature default condition is enabled. following procedure: When enabled, the door locks will lock automatically 1.
Page 35: Understanding Your Instrument Panel
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 NOTE: Automatic Unlock Doors On Exit Programming • If you do not hear the chime it means that the system The Automatic Unlock Doors On Exit feature can be did not enter the programming mode and you will enabled or disabled as follows: need to repeat the procedure.
Page 36: Child-Protection Door Lock System - Rear Doors
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. A single chime will indicate the completion of the Child-Protection Door Lock System — Rear programming. Doors To provide a safer environment for small children riding 5. Repeat these steps if you want to return this feature to in the rear seats, the rear doors are equipped with its previous setting.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Child-Protection Door Lock Location Child-Protection Door Lock Function WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged.
Page 38: Power Windows - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the EVIC, the power NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window switches will remain active for up to 10 min- window and open the door with the outside door handle.
Page 39: Auto-Down
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window LOCKOUT switch.
Page 40: Liftgate
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only).
Page 41: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • Although the liftgate has no inside release mechanism, Gas props support the liftgate in the open position. the liftgate trim panel includes an opening with a However, because the gas pressure drops with tempera- snap-in cap that provides access to release the latch in ture, it may be necessary to assist the props when the event of an electrical system malfunction.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Side Air Bag Inflatable Curtains (SABIC) Please pay close attention to the information in this section. for the driver and passengers seated next to a window It tells you how to use your restraint system properly, to keep you and your passengers as safe as possible.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 You should read the instructions provided with your WARNING! child restraint to make sure that you are using it properly. Infants in rear facing child restraints should never 2. All occupants should always wear their lap and ride in the front seat of a vehicle with a passenger shoulder belts properly.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Supplemental Side Air Bag Inflatable Curtain • Relying on the air bags alone could lead to more (SABIC) and Seat-Mounted Side Air Bags (SAB) severe injuries in a collision. The air bags work also need room to inflate.
Page 45: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Research has shown that seat belts save lives, and they WARNING! can reduce the seriousness of injuries in a collision. Some • It is dangerous to ride in a cargo area, inside or of the worst injuries happen when people are thrown from the vehicle.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is along side the pillar near the WARNING! (Continued) back of your seat. Grasp the latch plate and pull out the • Wearing your belt in the wrong place could make belt.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! (Continued) abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
Page 50: Adjustable Upper Shoulder Belt Anchorage
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best.
Page 51: Second Row Center Lap/Shoulder Belt Operating Instructions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 In the rear seat, move toward the center of the seat to position the belt away from your neck. Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder belt features a three-point seat belt with a mini-latch and buckle, which allows the shoulder belt to detach from the lower anchor when the seat is folded.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Route the shoulder belt to the inside of the right head 5. Sit back in the seat. Slide the regular latch plate up the restraint. webbing as far as necessary to allow the belt to go around your lap.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 7. Position the lap belt across your thighs, below your 8. Position the shoulder belt on your chest so that it is abdomen. To remove slack in the lap belt portion, pull up comfortable and not resting on your neck.
Page 54: Lap/Shoulder Belt Untwisting Procedure
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 10. To disengage the mini-latch from the mini-buckle for 4. Continue to slide the latch plate up until it clears the storage, insert the regular latch plate into the black folded webbing. button on the top of the mini-buckle.
Page 55: Automatic Locking Retractor Mode (Alr) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 If the passenger seating position is equipped with an position that has a belt with this feature. Children ALR and is being used for normal usage: 12 years old and under should always be properly restrained in the rear seat.
Page 56: Energy Management Feature
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners WARNING! The seat belts for both front seating positions are • The belt and retractor assembly must be replaced equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. if the seat belt assembly Automatic Locking Re- These devices may improve the performance of the seat tractor (ALR) feature or any other seat belt func-...
Page 57: Supplemental Active Head Restraints (Ahr) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Supplemental Active Head Restraints (AHR) — the Active Head Restraints (AHR) to deploy. If a rear If Equipped impact requires deployment, both the driver and front These head restraints are passive, deployable compo- passenger seat AHRs will be deployed.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact. However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on several factors, including the severity and type of the impact.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 1. Grasp the deployed AHR from the rear seat. CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 3 — Final Downward Movement To Engage Locking Mechanism 4. The AHR front soft foam and trim half should lock 1 —...
Page 61: Enhanced Seat Belt Use Reminder System (Beltalert )
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Enhanced Seat Belt Use Reminder System (BeltAlert ) BeltAlert is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert ) to fasten their seat belts. The feature is active whenever the ignition is on.
Page 62: Seat Belt Extender
BeltAlert can be enabled or disabled by your authorized increase the risk of injury in a collision. Only use dealer. Chrysler Group LLC does not recommend deac- when the seat belt is not long enough when it is worn tivating BeltAlert .
Page 63: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Air Bags have a multistage inflator This vehicle may be equipped with Supplemental Seat- design. This allows the air bag to have different rates of Mounted Side Air Bags (SAB) to provide enhanced inflation that are based on several factors, including the protection for an occupant during a side impact.
Page 65: Advanced Front Air Bag Features
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 • Instrument Panel Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage • Knee Impact Bolster driver and front passenger air bags. This system provides • Driver Advanced Front Air Bag output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), •...
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags (SAB) WARNING! — If Equipped • No objects should be placed over or near the air Supplemental Seat-Mounted Side Air Bags (SAB) may bag on the instrument panel, because any such provide enhanced protection to help protect an occupant objects could cause harm if the vehicle is in a during a side impact.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Being too close to the Supplemental Side Air Bag WARNING! (Continued) Inflatable Curtain and/or Seat-Mounted Side Air Bag • Do not use accessory seat covers or place objects during deployment could cause you to be severely between you and the side air bags;...
Page 69: Air Bag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Along with seat belts and pretensioners, Advanced Front Advanced Front Air Bags are designed to provide addi- Air Bags work with the knee bolsters to provide im- tional protection by supplementing the seat belts in proved protection for the driver and front passenger.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because air bag sensors measure vehicle deceleration Also, the ORC turns on the Air Bag Warning over time, vehicle speed and damage by themselves are Light in the instrument panel for approxi- not good indicators of whether or not an air bag should mately four to eight seconds for a self-check have deployed.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 are possible, based on the collision type and severity. The WARNING! steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as Ignoring the Air Bag Warning Light in your instru- the air bags inflate to their full size.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on several factors, including the severity and type A quantity of non-toxic gas is generated to inflate the side of collision, the side air bag inflator on the crash side of curtain air bag.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 • Unlock the doors automatically. Front And Side Impact Sensors In front and side impacts, impact sensors can aid the In order to reset the Enhanced Accident Response System ORC in determining appropriate response to impact functions after an event, the ignition switch must be events.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE floor. They are not caused by contact with chemicals. Do not drive your vehicle after the air bags have de- They are not permanent and normally heal quickly. ployed. If you are involved in another collision, the air However, if you haven’t healed significantly within a bags will not be in place to protect you.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Maintaining Your Air Bag System WARNING! (Continued) • Do not attempt to modify any part of your air bag WARNING! system. The air bag may inflate accidentally or • Modifications to any part of the air bag system may not function properly if modifications are could cause it to fail when you need it.
Page 76: Event Data Recorder (Edr)
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light NOTE: If the speedometer, tachometer, or any engine You will want to have the air bags ready to related gauges are not working, the Occupant Restraint inflate for your protection in a collision. The Controller (ORC) may also be disabled.
Page 77: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • Whether or not the driver and passenger safety belts To read data recorded by an EDR, special equipment is were buckled/fastened; required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, •...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The infant carrier is only used rearward-facing in the WARNING! vehicle. It is recommended for children from birth until they reach the weight or height limit of the infant carrier. In a collision, an unrestrained child, even a tiny baby, Convertible child seats can be used either rearward- can become a projectile inside the vehicle.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 in the vehicle by the lap/shoulder belt or the LATCH WARNING! child restraint anchorage system. Refer to “Lower An- chors and Tether for CHildren (LATCH)”. Rearward-facing child seats must never be used in the front seat of a vehicle with the front passenger air All children whose weight or height is above the bag.
Page 80 The ALR will make a has a label certifying that it meets all applicable Safety ratcheting noise if you extract the entire belt from the Standards. Chrysler Group LLC also recommends that retractor and then allow the belt to retract into the...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 retractor. For additional information on ALR, refer to retracts, you will hear a ratcheting sound. This indicates “Automatic Locking Mode”. The chart below defines the the safety belt is now in the Automatic Locking mode. seating positions with an Automatic Locking Retractor 2.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Make sure that the child is upright in the seat. around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, • The lap portion should be low on the hips and as snug try a different seating position.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 webbing-mounted lower attachments. Child seats with fixed lower attachments must be installed in the out- board positions only. Regardless of the specific type of lower attachment, never install LATCH-compatible child seats such that two seats share a common lower anchor- age.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE provide add-on tether strap kits for some of their older restraint installation, instead of tucking the seat belt products. Tether anchorage kits are also available for behind the child restraint, route the seat belt through the most older vehicles.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 In general, you will first loosen the adjusters on the lower Not all child restraint systems will be installed as we and tether straps so that you can attach the hook or have described here.
Page 86: Engine Break-In Recommendations
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transporting Pets The engine oil installed in the engine at the factory is a Air Bags deploying in the front seat could harm your pet. high-quality energy conserving type lubricant. Oil An unrestrained pet will be thrown about and possibly changes should be consistent with anticipated climate injured, or injure a passenger during panic braking or in conditions under which vehicle operations will occur.
Page 87: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 SAFETY TIPS Exhaust Gas Transporting Passengers WARNING! NEVER TRANSPORT PASSENGERS IN THE CARGO AREA. Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. WARNING! Breathing it can make you unconscious and can •...
Page 88: Safety Checks You Should Make Inside The Vehicle
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The WARNING! (Continued) Vehicle • If it is necessary to sit in a parked vehicle with the Seat Belts engine running, adjust your heating or cooling Inspect the belt system periodically, checking for cuts, controls to force outside air into the vehicle.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Defroster WARNING! (Continued) Check operation by selecting the defrost mode and place • Always make sure that floor mats are properly the blower control on high speed. You should be able to attached to the floor mat fasteners.
Page 90: Periodic Safety Checks You Should Make Outside The Vehicle
88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE lodged in the tread or sidewall. Inspect the tread for cuts WARNING! (Continued) and cracks. Inspect sidewalls for cuts, cracks and bulges. • Always make sure that objects cannot fall into the Check the wheel nuts for tightness.
Page 91: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......94 Uconnect™ Phone — If Equipped ... 98 ▫...
Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Head Restraints ..... 141 Voice Command — If Equipped ... 128 ▫...
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Instrument Panel Dimming ... . . 151 ▫ To Vary The Speed Setting ....159 ▫...
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sunroof — If Equipped ... . 169 Cupholders ......178 ▫...
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 ▫ Rear Window Defroster ....188 Rear Window Features ....187 ▫...
Page 96: Mirrors
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 97: Outside Mirror - Driver Side
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 to the left of the button will illuminate to indicate when CAUTION! the dimming feature is activated. The sensor to the right of the button does not illuminate. To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
Page 98: Power Mirrors
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 99: Heated Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 100: Vanity Mirrors - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vanity Mirrors — If Equipped Uconnect™ Phone — IF EQUIPPED To use the vanity mirror, rotate the sun visor down and Uconnect™ Phone is a voice-activated, hands-free, in- swing the mirror cover upward. vehicle communications system.
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • www.jeep.com/uconnect system. Only one linked (or paired) mobile phone can be used with the system at a time. The system is available in • or call 1–877–855–8400 English, Spanish, or French languages. Uconnect™...
Page 102: Operation
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™ dio. The individual buttons are described in the Phone and to navigate through the Uconnect™ Phone “Operation”...
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 example, you can use the compound form voice Cancel Command command “Phonebook New Entry”, or you can break At any prompt, after the beep, you can say “Cancel” and the compound form command into two voice com- you will be returned to the main menu.
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say “Pair a Device” phone to use if multiple mobile phones are in the and follow the audible prompts. vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the •...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook “Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • Depending on the maximum number of entries down- Edit Uconnect™ Phonebook Entries loaded, there may be a short delay before the latest NOTE: downloaded names can be used. Until then, if avail- •...
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the Phonebook Delete menu, you will After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in then be asked for the name of the entry that you wish the phonebook, call the number you just edited, or return to delete.
Page 109: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • After the “Ready” prompt and the following beep, say Delete/Erase “All” Uconnect™ Phonebook Entries “Phonebook List Names”. • Press the button to begin. • The Uconnect™ Phone will play the names of all the •...
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mobile service plan. For example, if your mobile service mobile phone. Press the button to place the current plan provides three-way calling, this feature can be call on hold and answer the incoming call. accessed through the Uconnect™...
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Place/Retrieve A Call From Hold Three-Way Calling To put a call on hold, press the button until you hear To initiate three-way calling, press the button while a single beep. This indicates that the call is on hold. To a call is in progress, and make a second phone call, as bring the call back from hold, press and hold the described under “Making a Second Call While Current...
Page 112: Uconnect™ Phone Features
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say • After the ignition key is switched to OFF, a call can “Redial”. continue on the Uconnect™ Phone for a certain dura- tion, after which the call is automatically transferred •...
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 • After the “Ready” prompt and the following beep, say After selecting one of the languages, all prompts and voice commands will be in that language. “Emergency” and the Uconnect™ Phone will instruct the paired mobile phone to call the emergency num- NOTE: After every Uconnect™...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mexico City in Mexico). Please refer to the 24-Hour WARNING! “Towing Assistance” coverage details on the DVD in the Warranty Information Booklet and the 24-Hour To use your Uconnect™ Phone System in an emer- Towing Assistance references.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Working With Automated Systems is also to be used for navigating through an automated This method is used in instances where one generally has customer service center menu structure, and to leave a to press numbers on the mobile phone keypad while number on a pager.
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Barge In — Overriding Prompts Phone And Network Status Indicators The “Voice Command” button can be used when you If available on the radio and/or on a premium display wish to skip part of a prompt and issue your voice such as the instrument panel cluster, and supported by command immediately.
Page 117: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 NOTE: Certain brands of mobile phones do not send the Advanced Phone Connectivity dial ring to the Uconnect™ Phone to play it on the vehicle Transfer Call To And From Mobile Phone audio system, so you will not hear it. Under this situa- The Uconnect™...
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say List Paired Mobile Phone Names “Setup Select Phone” and follow the prompts. • Press the button to begin. • You can also press the button at any time while the •...
Page 119: Things You Should Know About Your Uconnect™ Phone
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • You can also press the • Press the button at any time while the button and say the “Voice Training, list is being played, and then choose the phone you System Training, or Start Voice Training” command. wish to delete.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • low-to-medium vehicle speed, This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will • low road noise, prompt you before resetting to factory settings. •...
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • Phonebook (Downloaded and Uconnect™ Phone Lo- • low road noise, cal) name recognition rate is optimized when the • smooth road surface, entries are not similar. • fully closed windows, • Numbers must be spoken in single digits. “800” must •...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recent Calls After reading a message, you can “Reply” or “Forward” If your phone supports “Automatic Phonebook Down- the message using Uconnect™ Phone. load”, Uconnect™ Phone can list your Outgoing, Incom- Send Messages: ing and Missed Calls.
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4.
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Bluetooth Communication Link Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the the system from announcing the new incoming mes- Uconnect™...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 130: General Information
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 131: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: If you do not say a command within a few The system will best recognize your speech if the win- seconds, the system will present you with a list of options. dows are closed, and the heater/air conditioning fan is set to low.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • “Menu Radio” (to switch to the radio menu) Disc To switch to the disc mode, say “Disc”. In this mode, you • “Main Menu” (to switch to the main menu) may say the following commands: Satellite Radio •...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Switch to system setup” − “Continue” (to continue recording) • “Change to setup” − “Delete” (to delete the recording) • “Play Memos” (to play previously recorded memos) • “Main menu setup” or —...
Page 135: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Voice Training SEATS For users experiencing difficulty with the system recog- Seats are a part of the Occupant Restraint System of the nizing their voice commands or numbers the Uconnect™ vehicle. Voice “Voice Training” feature may be used. WARNING! 1.
Page 136: Power Seats - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats — If Equipped WARNING! Some models may be equipped with a power driver’s • Adjusting a seat while driving may be dangerous. seat. The power seat switch is located on the outboard side of the seat near the floor.
Page 137: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Adjusting The Seat Forward Or Rearward Heated Seats — If Equipped The seat can be adjusted both forward and rearward. On some models, the front driver and passenger seats Push the seat switch forward or rearward, the seat will may be equipped with heaters in both the seat cushions move in the direction of the switch.
Page 138: Manual Front Seat Adjustment
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 45 minutes of continuous operation. If LOW-level heating WARNING! (Continued) is selected, the system automatically turns the heater and • Do not place anything on the seat or seatback that the indicator light OFF after a maximum of 45 minutes of insulates against heat, such as a blanket or cush- continuous operation.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 140: Manual Seat Height Adjustment - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Seat Height Adjustment — If Equipped Manual Lumbar — If Equipped The driver’s seat height can be raised or lowered by using The lumbar adjustment handle is located on the outboard a lever, located on the outboard side of the seat. Pull side of the driver’s seatback.
Page 141: Driver's Seatback Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Driver’s Seatback Recline WARNING! To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired angle Do not ride with the seatback reclined so that the and release the lever.
Page 142: Fold-Flat Front Passenger Seat
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Front Passenger Seat To fold the front passenger seat, lift the recliner handle to the full upward position and push the seatback forward until it rests on the seat cushion. Front Passenger Seat Folded Flat Fold-Flat Front Passenger Seat Lever...
Page 143: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Head Restraints Active Head Restraints — Front Seats Head restraints are designed to reduce the risk of injury Active Head Restraints are passive, deployable compo- by restricting head movement in the event of a rear nents, and vehicles with this equipment cannot be readily impact.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted restraint. To lower the head restraint, press the push forward and backward. To tilt the head restraint closer to button, located at the base of the head restraint, and push the back of your head, pull forward on the bottom of the downward on the head restraint.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information. WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.
Page 146: Folding Rear Seat
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat WARNING! (Continued) To provide additional storage area, each rear seatback can • Active Head Restraints may be deployed if they be folded forward. Pull the strap forward to move the are struck by an object such as a hand, foot or loose seatback forward and flat.
Page 147: Reclining Rear Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 WARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
Page 148: To Open And Close The Hood
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only with the vehicle is parked.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 8 in (20 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
Page 150: Lights
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever to turn on the parking lights. The multifunction lever controls the operation of the headlights, parking lights, turn signals, headlight beam Turn the end of the lever to the second detent to turn on selection, instrument panel light dimming, interior lights, the headlights.
Page 151: Daytime Running Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Daytime Running Lights — If Equipped The high beam lights will come on as Daytime Running Lights (lower intensity), whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position except PARK.
Page 152: Turn Signals
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals NOTE: If either light remains on and does not flash, or Move the multifunction lever up or down and the arrows there is a very fast flash rate, check for a defective outside on each side of the instrument cluster flash to show light bulb.
Page 153: Instrument Panel Dimming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: If the multifunction lever is held in the flash-to- Rotate the center portion of the lever upward to the last pass position for more than 20 seconds, the high beams detent to turn on the interior lighting. will shut off.
Page 154: Map/Reading Lights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Map/Reading Lights NOTE: The lights will remain on until the switch is These lights are mounted between above the rear view pressed a second time, so be sure they have been turned mirror. Each light is turned on by pressing the button. off before leaving the vehicle.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. •...
Page 156: Windshield Wiper Operation
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation Intermittent Wiper System Rotate the end of the lever upward to the second detent past Use the intermittent wiper when weather conditions the intermittent settings for low-speed wiper operation. make a single wiping cycle, with a variable pause be- tween cycles, desirable.
Page 157: Windshield Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Windshield Washers WARNING! To use the washer, pull the control lever toward you and hold while spray is desired. If the lever is pulled while in Sudden loss of visibility through the windshield the delay range, the wiper will operate in low-speed could lead to a collision.
Page 158: Tilt Steering Column
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The mist feature does not activate the washer TILT STEERING COLUMN pump; therefore, no washer fluid will be sprayed on the This feature allows you to tilt the steering column windshield. The wash function must be used in order to upward or downward.
Page 159: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
Page 160: To Activate
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the down if multiple Speed Control functions are operated at right side of the steering wheel. the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
Page 161: To Set A Desired Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 To Set A Desired Speed To Resume Speed Turn the Electronic Speed Control ON. When the vehicle To resume a previously set speed, push the RES (+) has reached the desired speed, press the SET (-) button button and release.
Page 162: To Accelerate For Passing
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To decrease speed while the Electronic Speed Control is On steep hills, a greater speed loss or gain may occur so set, push the SET (-) button. If the button is continually it may be preferable to drive without Electronic Speed held in the SET (-) position, the set speed will continue to Control.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 The HomeLink buttons, located on either the overhead console, headliner or sunvisor, designate the three differ- ent HomeLink channels. The HomeLink indicator is located above the center button. HomeLink Buttons/Sunvisor/Headliner NOTE: HomeLink is disabled when the Vehicle Secu- rity Alarm is active.
Page 164: Before You Begin Programming Homelink
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Before You Begin Programming HomeLink NOTE: • Erasing all channels should only be performed when Be sure that your vehicle is parked outside of the garage before you begin programming. programming HomeLink for the first time. Do not erase channels when programming additional buttons.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 3. Simultaneously press and hold both the Homelink button you want to program and the hand-held transmit- ter button. 4. Continue to hold both buttons and observe the indi- cator light. The Homelink indicator will flash slowly and then rapidly after Homelink has received the fre- quency signal from the hand-held transmitter.
Page 166: Programming A Non-Rolling Code
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: You have 30 seconds in which to initiate the next 2. Press and hold the desired HomeLink button until step after the LEARN button has been pressed. the indicator light begins to flash after 20 seconds. Do not release the button.
Page 167: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 4. Continue to hold both buttons and observe the indi- Reprogramming A Single HomeLink Button cator light. The Homelink indicator will flash slowly To reprogram a channel that has been previously trained, and then rapidly after Homelink has received the fre- follow these steps: quency signal from the hand-held transmitter.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to pick up the signal during programming. Similar to this 4. Watch for the HomeLink indicator to change flash Canadian law, some U.S. gate operators are designed to rates. When it changes, it is programmed. It may take up time-out in the same manner.
Page 169: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Reprogramming A Single HomeLink Button Using HomeLink To reprogram a channel that has been previously trained, To operate, press and release the programmed follow these steps: HomeLink button. Activation will now occur for the programmed device (i.e., garage door opener, gate opera- 1.
Page 170: Troubleshooting Tips
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips WARNING! If you are having trouble programming HomeLink , here • Your motorized door or gate will open and close are some of the most common solutions: while you are programming the universal trans- •...
Page 171: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located in the reading light. Canada RSS-210. Operation is subject to the following two conditions: 1.
Page 172: Opening Sunroof - Express
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express WARNING! Press the switch rearward and release it within one-half • Never leave children in a vehicle with the key in second and the sunroof will open automatically from any position.
Page 173: Closing Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Closing Sunroof — Express Pinch Protect Feature Press the switch forward and release it within one-half This feature will detect an obstruction in the opening of second and the sunroof will close automatically from any the sunroof during Express Close operation.
Page 174: Sunshade Operation
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunshade Operation Sunroof Maintenance The sunshade can be opened manually. However, the Use only a non-abrasive cleaner and a soft cloth to clean sunshade will open automatically as the sunroof opens. the glass panel. NOTE: The sunshade cannot be closed if the sunroof is Ignition Off Operation open.
Page 175: Electrical Power Outlets
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 ELECTRICAL POWER OUTLETS Power is available when the ignition switch is in the ON There is a standard 12 Volt (13 Amp) power outlet located or ACC position. Insert the cigar lighter or accessory plug in the instrument panel for added convenience.
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
Page 178: Power Inverter - If Equipped
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watt) AC power inverter is located on the front of the center console for added convenience. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts.
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Do not use a three-prong adaptor. power from the vehicle’s battery, even when not in •...
Page 180: Cupholders
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS There are two cupholders located in the back for the rear Your vehicle is equipped with four cupholders. There are passengers. two illuminated cupholders located in the front. Rear Cupholders Illuminated Front Cupholders...
Page 181: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 STORAGE To open the lower glove compartment, pull outward on the release handle. Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. Glove Compartment Storage Compartments 1 —...
Page 182: Door Storage
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Storage The interior door panels are equipped with lower storage areas. Rear Door Storage Front Door Storage...
Page 183: Console Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 CONSOLE FEATURES To open the lower storage compartment, lift upward on The floor console contains both an upper and lower the lower handle to unlatch the lower storage compart- storage compartment. ment and lift the lid open. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open.
Page 184: Cargo Area Features
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press in on the flashlight to release it. WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving.
Page 185: Cargo Cover
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 To install the Cargo Cover, insert either end of the cover into one of the two notches located in the rear trim panels. With one of the cover ends installed, push inward on the opposite end and install it into the same notch location of the rear trim panel.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using the handle, pull the cover toward you and guide WARNING! the rear cover posts into the guides located on both sides of the rear trim panel. In a collision a cargo cover loose in the vehicle could cause injury.
Page 187: Removable Load Floor
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Removable Load Floor Cargo Tie-Down Loops The cargo area load floor is removable and can be There are four D-rings installed in the cargo area for washed with mild soap and water. securing cargo. Cargo Load Floor D-Rings...
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Place as much cargo as possible in front of the rear • Cargo tie-down loops are not safe anchors for a axle. Too much weight or improperly placed child seat tether strap. In a sudden stop or collision weight over or behind the rear axle can cause the a loop could pull loose and allow the child seat to rear of the vehicle to sway.
Page 189: Fold Down Speakers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Fold Down Speakers — If Equipped REAR WINDOW FEATURES When the liftgate is open, the speakers can swing down Rear Window Wiper/Washer off the trim panel to face rearward, for tailgating and The rear wiper/washer is controlled by a rotary switch other activities.
Page 190: Rear Window Defroster
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the center portion of the lever upward to the Rear Window Defroster first detent position for rear wiper operation. The rear window defroster button is located on the bottom right-side of the blower control knob. NOTE: The rear wiper operates in an intermittent mode Press this button to turn on the rear window defroster only.
Page 191: Roof Luggage Rack - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 ROOF LUGGAGE RACK — IF EQUIPPED CAUTION! The side rails and crossbars are designed to carry weight on vehicles equipped with a luggage rack. The load must Failure to follow these cautions can cause damage to not exceed 150 lbs (68 kg), and it should be uniformly the heating elements: •...
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! CAUTION! (Continued) • Travel at reduced speeds and turn corners care- • To prevent damage to the roof of your vehicle, DO fully when carrying large or heavy loads on the NOT carry any loads on the roof rack without the roof rack.
Page 193: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ EVIC Functions ..... 215 Instrument Panel Features ....194 ▫...
Page 194 192 UNDERSTANDING YOUR INSTRUMENT PANEL Media Center 230 (REQ) — AM/FM Stereo Media Center 730N/430/430N (RHR/RER/ Radio And 6–Disc CD/DVD Changer RBZ/RHB) CD/DVD/HDD/NAV — If (MP3/WMA AUX Jack) ....222 Equipped .
Page 195 UNDERSTANDING YOUR INSTRUMENT PANEL 193 ▫ Play Mode ......268 Media Center 130 With Satellite Radio (Sales Code RES+RSC).
Page 196: Instrument Panel Features
194 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped 2 — Demisters 6 — Glove Compartment 10 — Hazard Warning Flasher 3 — Instrument Cluster 7 —...
Page 197: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 195 INSTRUMENT CLUSTER...
Page 198: Instrument Cluster Descriptions
196 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. 1. Fuel Gauge / Fuel Door Reminder When the ignition switch is in the ON/RUN 3. Electronic Throttle Control (ETC) Light position, the pointer will show the level of fuel This light informs you of a problem with the remaining in the fuel tank.
Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 197 on briefly as a bulb check. If the light does not come on 6. Speedometer during starting, have the system checked by an autho- The Speedometer shows the vehicle speed in miles per rized dealer. hour and/or kilometers per hour (mph/kph).
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL alert you to turn the signals off. If either indicator flashes If the ABS light is on, the brake system should be serviced at a rapid rate, check for a defective outside light bulb. as soon as possible to restore the benefits of Anti-Lock brakes.
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 12. Tachometer normal, turn the engine off immediately and call for The white area of the scale shows the permissible engine service. Refer to “If Your Engine Overheats” in “What To revolutions-per-minute (RPM x 1000) for each gear range. Do In Emergencies”...
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL booster, the ABS pump will run when applying the brake WARNING! and a brake pedal pulsation may be felt during each stop. Driving a vehicle with the red brake light on is The dual brake system provides a reserve braking capac- dangerous.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 201 The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON/RUN posi- tion. If the Transmission Temperature Warning Light is illuminated and you continue operating the vehicle, NOTE: This light shows only that the parking brake is in some circumstances you could cause the fluid to applied.
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher tempera- WARNING! ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to A hot engine cooling system is dangerous. You or exceed the upper limits of the normal operating range.
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 203 20. Shift Lever Indicator by the vehicle manufacturer on the vehicle placard or tire The Shift Lever Indicator is self-contained within the inflation pressure label. (If your vehicle has tires of a instrument cluster. It displays the gear position of the different size than the size indicated on the vehicle automatic transmission.
Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL Please note that the TPMS is not a substitute for proper TPMS malfunction telltale after replacing one or more tire maintenance, and it is the driver’s responsibility to tires or wheels on your vehicle, to ensure that the maintain correct tire pressure, even if under-inflation has replacement or alternate tires and wheels allow the TPMS not reached the level to trigger illumination of the TPMS...
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 205 23. Odometer Display / Trip Odometer Display Area Vehicle Odometer Messages This display indicates the total distance the vehicle has When the appropriate conditions exist, the following been driven. odometer messages will display: NOTE: U.S. Federal regulations require that upon trans- door .
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL gASCAP Refer to “Engine Oil Overheating” under in “What To Do If the vehicle diagnostic system determines that the fuel In Emergencies”. filler cap is loose, improperly installed, or damaged, a CHANgE OIL Message “gASCAP” message will display in the odometer display Your vehicle is equipped with an engine oil change area.
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 207 2. Fully depress the accelerator pedal, slowly, three Certain conditions, such as a loose or missing gas cap, times within 10 seconds. poor fuel quality, etc., may illuminate the light after engine start. The vehicle should be serviced if the light 3.
Page 210 208 UNDERSTANDING YOUR INSTRUMENT PANEL 27. Electronic Stability Control (ESC) Activation/ WARNING! Malfunction Indicator Light — If Equipped The “ESC Activation/Malfunction Indicator A malfunctioning catalytic converter, as referenced Light” in the instrument cluster will come on above, can reach higher temperatures than in normal when the ignition switch is turned to the operating conditions.
Page 211: Mini-Trip Computer - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 209 • Each time the ignition is turned to ON/RUN, the ESC 29. Electronic Vehicle Information Center (EVIC) system will be ON, even if it was turned off previously. Display — If Equipped When the appropriate conditions exist, this display •...
Page 212: Control Buttons
210 UNDERSTANDING YOUR INSTRUMENT PANEL be driven several minutes before the updated tempera- STEP Button ture is displayed. Engine temperature can also affect the Press the STEP button located on the steering wheel to displayed temperature; therefore, temperature readings scroll through sub menus (i.e., Temperature, Trip Func- are not updated when the vehicle is not moving.
Page 213: Electronic Vehicle Information Center (Evic) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 211 Trip Odometer (ODO) ELECTRONIC VEHICLE INFORMATION CENTER This display shows the distance traveled since the last (EVIC) — IF EQUIPPED reset. Press and release the STEP button on the instru- The Electronic Vehicle Information Center (EVIC) fea- ment cluster to switch from odometer, to Trip A or Trip B.
Page 214 212 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC consists of the following: The system allows the driver to select information by pressing the following buttons mounted on the steering • System Status wheel: • Vehicle Information Warning Message Displays • Personal Settings (Customer-Programmable Features) •...
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 213 MENU Button DOWN Button Press and release the MENU button to scroll Press and release the DOWN button to scroll through the main menus (Fuel Economy, Warn- downward through the sub-menus. ings, Timer, Units, System, Personal Settings) or to exit sub-menus.
Page 216: Engine Oil Change Indicator System - If Equipped
214 UNDERSTANDING YOUR INSTRUMENT PANEL • Personal Settings Not Avail. — Vehicle not in PARK • Remote Start Aborted — Fuel Low (automatic transmission) or vehicle is in motion • Remote Start Aborted — System Fault (manual transmission). • Key In Ignition •...
Page 217: Evic Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 215 Unless reset, this message will continue to display each EVIC Functions time you turn the ignition switch to the ON/RUN • Compass/Temperature/Audio position. To turn off the message temporarily, press and • Average Fuel Economy release the Trip Odometer button on the instrument cluster.
Page 218: Compass/Temperature/Audio
216 UNDERSTANDING YOUR INSTRUMENT PANEL Compass/Temperature/Audio determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel Press and release the COMPASS button to display one of tank level. This is not resettable. eight compass headings to indicate the direction the vehicle is facing, the outside temperature, and the current NOTE: Significant changes in driving style or vehicle radio station.
Page 219: Elapsed Time
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Elapsed Time Press and release the MENU or DOWN buttons until Shows the total elapsed time of travel since the last reset. “Personal Settings” is displayed in the EVIC then press Elapsed time will increment when the ignition switch is the SELECT button.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL Auto Lock Doors press to unlock the remaining locked doors. When Re- When ON is selected, all doors lock automatically when mote Unlock All Doors is selected, all of the doors will the speed of the vehicle reaches 15 mph (24 km/h). Press unlock at the first press of the RKE transmitter UNLOCK and hold the SELECT button when in this display until button.
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Lock feature. Press and hold the SELECT button when in Illuminated Approach this display until “ON” or “OFF” appears to make your When this feature is selected the headlights will activate selection. and remain on for up to 90 seconds when the doors are unlocked using the RKE transmitter.
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the SELECT button when in this display NOTE: A good calibration requires a level surface and until “ENGLISH” or “METRIC” appears to make your an environment free from large metallic objects such as selection.
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 4. Press and release the SELECT button to start the calibration. The “CAL” indicator will display in the EVIC. 5. Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” indicator turns off.
Page 224: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
222 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the DOWN button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release the SELECT button until the proper variance zone is selected according to the map. 5.
Page 225: Operating Instructions - Radio Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 223 Operating Instructions - Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Press and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio screen.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button Program Type 16-Digit Character Display Pressing this button once will turn on the Music Type Information Inform mode for five seconds. Pressing the MUSIC TYPE button Jazz Jazz or turning the TUNE/SCROLL control knob within five News News seconds will allow the program format type to be se-...
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 • DVD Enter - When the disc is in DVD Menu mode, Program Type 16-Digit Character Display selecting DVD Enter will allow you to play the current Top 40 Top 40 highlighted selection. Use the remote control to scroll Weather Weather up and down the menu (if equipped).
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL • Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control equipped).
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Audio Language — If Equipped Subtitles — If Equipped Selecting this item allows you to choose a default audio Selecting this item allows you to choose between subtitle language (effective only if the language is supported by Off or On.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The user will have to set these defaults before You may add a second station to each pushbutton by loading a disc. If changes are made to these settings after repeating the above procedure with this exception: Press a disc is loaded, changes will not be effective.
Page 233: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Operation Instructions - (DISC MODE for CD and NOTE: The ignition switch must be in the ON or ACC MP3/WMA Audio Play, DVD-VIDEO) position to operate the radio. The radio DVD player and many DVD discs are coded by LOAD Button —...
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) SCAN Button (CD MODE) Press the EJECT button and the pushbutton Press the SCAN button to scan through each track on the with the corresponding number (1-6) where the CD currently playing.
Page 235: Notes On Playing Mp3/Wma Files
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Notes On Playing MP3/WMA Files The radio uses the following limits for file systems: The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. •...
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MPEG Sampling Fre- Bit Rate (kbps) MP3/WMA tracks, the radio will only play the MP3/ Specification quency (kHz) WMA tracks on that disc. 320, 256, 224, MPEG-1 Audio 192, 160, 128, Supported MP3/WMA File Formats...
Page 237: List Button (Disc Mode For Mp3/Wma Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Playback of MP3/WMA Files LIST Button (DISC Mode for MP3/WMA Play) When a medium containing MP3/WMA data is loaded, Pressing the LIST button will bring up a list of all folders the radio checks all files on the medium. If the medium on the disc.
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button for three seconds or SEEK Button (Auxiliary Mode) more and radio will display song titles for each file. No function. Press and hold the INFO button again for three seconds SCAN Button (Auxiliary Mode) to return to elapsed time display.
Page 239: Uconnect™ Multimedia (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Operating Instructions — Voice Command System Macrovision (If Equipped) This product incorporates copyright protection technol- For the radio, Refer to “Voice Command” in the ogy that is protected by U.S. patents and other intellec- Uconnect™ User Manual located on the DVD for further tual property rights.
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL sports, news, entertainment, and programming for chil- Electronic Serial Number/Sirius Identification dren, directly from its satellites and broadcasting studios. Number (ESN/SID) Please have the following information available when NOTE: Sirius service is not available in Hawaii and has calling: limited coverage in Alaska.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 • Dense tree coverage may interrupt reception in the Selecting Uconnect™ Multimedia (Satellite) Mode Press the SAT button until SAT appears in the display. A form of short audio mutes. CD may remain in the radio while in the Satellite radio •...
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button TUNE Control (Rotary) Pressing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel. tinuing to the next.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 SETUP Button the SET button twice and SET 2 will show in the display Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This following items: allows a total of 12 Satellite channels to be stored into pushbutton memory.
Page 244: Operating Instructions
242 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. Operating Instructions (Uconnect™ Phone) — If Equipped Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio.
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 247: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 245 SET/RND Button — To Set the Pushbutton Every time a preset button is used, a corresponding Memory button number will display. When you are receiving a station that you wish to Buttons 1 - 6 commit to pushbutton memory, press the SET/RND These buttons tune the radio to the stations that you button.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL • This radio is capable of playing compact discs (CD), CAUTION! recordable compact discs (CD-R), rewritable compact • This CD player will accept 4-3/4 in (12 cm) discs discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks.
Page 249: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 247 NOTE: Ejecting with the ignition OFF is not allowed on AM/FM Button convertible or soft-top models (if equipped). Press the button to select either AM or FM mode. SEEK Button SET/RND Button (Random Play Button) Press the right SEEK button for the next selection on the Press this button while the CD is playing to activate CD.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this display.) Supported Medium Formats (File Systems)
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Supported MP3 File Formats MPEG Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- Specification quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 320, 256, 224, extension may cause playback problems.
Page 252: Operation Instructions - Auxiliary Mode
250 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files Operation Instructions - Auxiliary Mode When a medium containing MP3 data is loaded, the The auxiliary (AUX) jack is an audio input jack, which radio checks all files on the medium. If the medium allows the user to plug in a portable device, such as an contains a lot of folders or files, the radio will take more MP3 player, or cassette player, and utilize the vehicle’s...
Page 253: Media Center 130 With Satellite Radio (Sales Code Res+Rsc)
UNDERSTANDING YOUR INSTRUMENT PANEL 251 MEDIA CENTER 130 WITH SATELLITE RADIO Operating Instructions — Radio Mode (SALES CODE RES+RSC) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL to seek up and the left switch to seek down. The radio Phone Button Uconnect™ Phone — If Equipped will remain tuned to the new station until you make Press this button to operate the Uconnect™ Phone feature another selection.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 3. After adjusting the hours, press the right side TUNE/ INFO Button SCROLL control knob to set the minutes. The minutes Press the INFO button for an RDS station (one with call will begin to blink. letters displayed).
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second MUSIC TYPE Button time and MID will display. Turn the TUNE/SCROLL Pressing this button once will turn on the Music Type control knob to the right or left to increase or decrease the mode for five seconds.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Program Type 16-Digit Character Display Program Type 16-Digit Character Display Information Inform Top 40 Top 40 Jazz Jazz Weather Weather News News By pressing the SEEK button when the Music Type icon Nostalgia Nostalga is displayed, the radio will be tuned to the next frequency Oldies Oldies station with the same selected Music Type name.
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL hours, press the TUNE/SCROLL control knob to set You may add a second station to each pushbutton by the minutes. The minutes will begin to blink. Adjust repeating the above procedure with this exception: Press the minutes using the right side TUNE/SCROLL the SET/RND button twice and SET 2 will show in the control knob.
Page 259: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Operation Instructions — CD MODE for CD and If you insert a disc with the ignition ON and the radio MP3 Audio Play ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will NOTE: show the track number, and index time in minutes and •...
Page 260 258 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold FF (Fast Forward) and the CD player will the radio will reinsert the CD but will not play it.
Page 261: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 259 • Maximum number of folders. (The radio display of file Notes On Playing MP3 Files The radio can play MP3 files; however, acceptable MP3 file names and folder names is limited. For large numbers recording media and formats are limited. When writing of files and/or folders, the radio may be unable to MP3 files, pay attention to the following restrictions.
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL Discs created with an option such as keep disc open after MPEG Sampling Fre- Bit Rate (kbps) writing are most likely multisession discs. The use of Specification quency (kHz) multisession for CD audio or MP3 playback may result in 320, 256, 224, longer disc loading times.
Page 263: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 261 Playback of MP3 Files LIST Button (CD Mode for MP3 Play) When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.
Page 264: Uconnect™ Multimedia (Satellite Radio) - If Equipped
262 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds Uconnect™ Multimedia (Satellite Radio) — If to return to elapsed time display. Equipped Satellite radio uses direct satellite-to-receiver broadcast- Operation Instructions - Auxiliary Mode ing technology to provide clear digital sound, coast to The auxiliary (AUX) jack is an audio input jack which coast.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 information, call the toll-free number 888-539-7474, or Sirius ID number will display. The Sirius ID number visit the Sirius web site at www.sirius.com, or at www- display will time out in two minutes. Press any button on .siriuscanada.ca for Canadian residents.
Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 RW/FF By pressing the SEEK button when the Music Type Pressing the RW (Rewind) or FF (Fast Forward) buttons function is active, the radio will be tuned to the next causes the tuner to search for the next channel in the channel with the same selected Music Type name.
Page 268: Ipod /Usb/Mp3 Control - If Equipped
266 UNDERSTANDING YOUR INSTRUMENT PANEL Select the button (1-6) you wish to lock onto this channel Operating Instructions - Uconnect™ Phone and press and release that button. If a button is not (If Equipped) selected within five seconds after pressing the SET but- Refer to “Uconnect™...
Page 269: Connecting The Ipod Or External Usb Device
UNDERSTANDING YOUR INSTRUMENT PANEL 267 iPod control supports Mini, 4G, Photo, Nano, 5G iPod and iPhone devices. Some iPod software versions may not fully support the iPod control features. Please visit Apple’s website for software updates. NOTE: • If the radio has a USB port, refer to the appropriate Uconnect™...
Page 270: Using This Feature
268 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the audio device battery is completely dis- Controlling The iPod Or External USB Device charged, it may not communicate with the iPod /USB/ Using Radio Buttons MP3 control system until a minimum charge is attained. To get into the iPod /USB/MP3 control mode and access Leaving the audio device connected to the iPod /USB/ a connected audio device, either press the “AUX”...
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 • Turning it clockwise (forward) by one click, while during play mode will jump to the next track in the playing a track, skips to the next track or press the list, or press the VR button and say Next or Previous VR button and say Next Track .
Page 272: List Or Browse Mode
270 UNDERSTANDING YOUR INSTRUMENT PANEL • Turning it clockwise (forward) and counterclock- SCAN button again. During Scan mode, pressing the << SEEK and SEEK >> buttons will select the previ- wise (backward) scrolls through the lists, displaying ous and next tracks. the track detail on the radio display.
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 • Preset 2 – Artists device, then follow the same steps to go to the desired track in that list. Not all iPod or external USB device • Preset 3 – Albums sub-menu levels are available on this system. •...
Page 274: Bluetooth Streaming Audio (Btsa)
272 UNDERSTANDING YOUR INSTRUMENT PANEL phone system. Seven devices can be paired to the WARNING! Uconnect™ phone system, but just one can be selected and played. Do not plug in or remove the iPod or external USB device while driving. Failure to follow this warning Selecting Different Audio Device could result in an accident.
Page 275: Steering Wheel Audio Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Previous Track Use the SEEK DOWN button, or press the VR button on the radio and say “Previous Track” to jump to the previous track music on your cellular phone. Browse Browsing is not available on a BTSA device. Only the current song that is playing will display info.
Page 276: Radio Operation
274 UNDERSTANDING YOUR INSTRUMENT PANEL Pressing the center button will make the radio switch will go to the beginning of the current track, or to the between the various modes available. beginning of the previous track if it is within one second after the current track begins to play.
Page 277: Radio Operation And Mobile Phones
UNDERSTANDING YOUR INSTRUMENT PANEL 275 3. Do not apply paper or tape to the disc; avoid scratch- RADIO OPERATION AND MOBILE PHONES ing the disc. Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from 4.
Page 278: Manual Heating And Air Conditioning
276 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Heating And Air Conditioning Blower Control Rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (OFF) position.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 Temperature Control Mode Control (Air Direction) Rotate this control to regulate the tem- Rotate this control to choose from sev- perature of the air inside the passenger eral patterns of air distribution. You compartment. Rotating the dial left can select either a primary mode as into the blue area of the scale indicates identified by the symbols on the con-...
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: For all settings, except full cold or full hot, there Defrost is a difference in temperature between the upper and Air is directed through the windshield and side lower outlets. The warmer air flows to the floor outlets. window demist outlets.
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 • The A/C can be deselected manually without disturb- Recirculation Control Pressing the Recirculation Control button will ing the mode control selection. put the system in recirculation mode. This can • When the ignition switch is turned to the LOCK be used when outside conditions such as position, the recirculation feature will be cancelled.
Page 282: Automatic Temperature Control (Atc) - If Equipped
280 UNDERSTANDING YOUR INSTRUMENT PANEL • MAX A/C For maximum cooling use the A/C and recirculation buttons at the same time. • ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 NOTE: The AUTO position performs best for front seat NOTE: • The temperature setting can be adjusted at anytime occupants only. without affecting automatic operation. 2. Dial in the temperature you would • Pressing the Air Conditioning Control button while in like the system to maintain by rotating the Temperature Control knob.
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control Mode Preferred Automatic, or Blower and Mode Pre- For full automatic operation or for ferred Automatic. This means the operator can override automatic blower operation, turn the the blower, the mode, or both. There is a manual blower knob to the AUTO position.
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283...
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 288: Operating Tips
286 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...
Page 291 STARTING AND OPERATING CONTENTS Starting Procedures ....293 Manual Transmission — If Equipped ..296 ▫...
Page 292 290 STARTING AND OPERATING ▫ Brake Assist System (BAS) ....317 AutoStick ......306 ▫...
Page 293 STARTING AND OPERATING 291 ▫ Replacement Tires ....344 Tires — General Information ... . . 336 ▫...
Page 294 292 STARTING AND OPERATING ▫ MMT In Gasoline ....359 Trailer Towing ......365 ▫...
Page 295: Starting Procedures
STARTING AND OPERATING 293 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both • Do not leave the key fob in or near the vehicle. A inside and outside mirrors, and fasten your seat belts. child could operate power windows, other con- trols, or move the vehicle.
Page 296: Automatic Transmission - If Equipped
294 STARTING AND OPERATING Automatic Transmission – If Equipped Simply turn the ignition switch to the START position The shift lever must be in the PARK or NEUTRAL and release when the engine starts. If the engine fails to position before you can start the engine. Apply the brakes start within 15 seconds, turn the ignition switch to the before shifting to any driving gear.
Page 297: Extreme Cold Weather
STARTING AND OPERATING 295 Extreme Cold Weather (Below –20°F or 29°C) WARNING! To ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (avail- Never pour fuel or other flammable liquid into the able from your authorized dealer) is recommended. throttle body air inlet opening in an attempt to start the vehicle.
Page 298: Engine Block Heater - If Equipped
296 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED MANUAL TRANSMISSION — IF EQUIPPED The engine block heater warms the engine, and permits Five–Speed Manual Transmission quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a WARNING! grounded, three-wire extension cord.
Page 299 STARTING AND OPERATING 297 For most city driving, you will find it easier to use only the lower gears. For steady highway driving with light accelerations, fifth gear is recommended. Never drive with your foot resting on the clutch pedal, and never try to hold the vehicle on a hill with the clutch pedal partially engaged.
Page 300: Recommended Shift Speeds
298 STARTING AND OPERATING Recommended Shift Speeds Downshifting To use your manual transmission for optimal fuel Proper downshifting will improve fuel economy and economy, it should be upshifted as listed in the following prolong engine life. table. CAUTION! Manual Transmission Recommended Shift Speeds Units in mph (km/h) If you skip more than one gear while downshifting Accel-...
Page 301: Automatic Transmission - If Equipped
STARTING AND OPERATING 299 AUTOMATIC TRANSMISSION — IF EQUIPPED WARNING! • Unintended movement of a vehicle could injure CAUTION! those in or near the vehicle. As with all vehicles, Damage to the transmission may occur if the follow- you should never exit a vehicle while the engine is ing precautions are not observed: running.
Page 302: Key Ignition Park Interlock
300 STARTING AND OPERATING Brake/Transmission Shift Interlock System WARNING! (Continued) This vehicle is equipped with a Brake Transmission Shift • Do not leave the key fob in or near the vehicle. A Interlock (BTSI) that holds the shift lever in the PARK child could operate power windows, other con- position unless the brakes are applied.
Page 303: Gear Ranges
STARTING AND OPERATING 301 Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. The transmission shift lever has PARK, REVERSE, NEU- TRAL, and DRIVE shift positions.
Page 304 302 STARTING AND OPERATING When parking on a level surface, you may place the shift WARNING! (Continued) lever in the PARK position first, and then apply the • Your vehicle could move and injure you and others parking brake. if it is not completely in PARK. Check by trying to When parking on a hill, apply the parking brake before move the shift lever rearward (with the brake placing the shift lever in PARK, otherwise the load on the...
Page 305 STARTING AND OPERATING 303 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Allowing children to be in a vehicle unattended is those in or near the vehicle. As with all vehicles, dangerous for a number of reasons. A child or you should never exit a vehicle while the engine is others could be seriously or fatally injured.
Page 306 304 STARTING AND OPERATING REVERSE CAUTION! (Continued) This range is for moving the vehicle backward. Shift into • DO NOT race the engine when shifting from REVERSE only after the vehicle has come to a complete PARK or NEUTRAL into another gear range, as stop.
Page 307 STARTING AND OPERATING 305 using a lower gear will improve performance and extend CAUTION! transmission life by reducing excessive shifting and heat buildup. Towing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can result During sustained high speed driving or trailer towing up in severe transmission damage.
Page 308: Autostick
306 STARTING AND OPERATING AUTOSTICK lever to the (+) side will activate AutoStick and shift up AutoStick is a driver-interactive transmission that offers to the next higher manual ratio, unless you are already six manual ratio changes to provide you with more operating in or near Overdrive, in which case sixth gear control.
Page 309: General Information
STARTING AND OPERATING 307 General Information FOUR-WHEEL DRIVE OPERATION — IF EQUIPPED • If a ratio other than first is selected and the vehicle is This feature provides full time, on-demand, four–wheel brought to a stop, the transmission control logic will drive (4WD).
Page 310: On-Road Driving Tips
308 STARTING AND OPERATING traction surfaces, activate the “4WD LOCK” switch by They are not designed for cornering at the same speeds as pulling up once and releasing. This locks the center conventional two-wheel drive vehicles any more than coupling allowing more torque to be sent to the rear low-slung sports cars are designed to perform satisfacto- wheels.
Page 311: Power Steering Fluid Check
STARTING AND OPERATING 309 NOTE: CAUTION! • Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that Prolonged operation of the steering system at the end there is a problem with the power steering system. of the steering wheel travel will increase the steering fluid temperature and it should be avoided when •...
Page 312: Parking Brake
310 STARTING AND OPERATING If necessary, add fluid to restore to the proper indicated CAUTION! level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Do not use chemical flushes in your power steering Parts”...
Page 313 STARTING AND OPERATING 311 NOTE: • When the parking brake is applied and the automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 314 312 STARTING AND OPERATING WARNING! WARNING! (Continued) • Always fully apply the parking brake when leav- • When leaving the vehicle, always remove the key ing your vehicle or it may roll and cause damage or fob from the ignition and lock your vehicle. injury.
Page 315: Brake System
STARTING AND OPERATING 313 BRAKE SYSTEM If either of the two hydraulic systems lose normal capa- Your vehicle is equipped with power assisted brakes as bility, the remaining system will still function with some standard equipment. In the event power assist is lost for loss of overall braking effectiveness.
Page 316: Anti-Lock Brake System (Abs)
314 STARTING AND OPERATING Anti-Lock Brake System (ABS) WARNING! (Continued) The ABS provides increased vehicle stability and brake • The ABS cannot prevent collisions, including performance under most braking conditions. The system those resulting from excessive speed in turns, automatically “pumps” the brakes during severe braking following another vehicle too closely, or hydro- conditions to prevent wheel lock-up.
Page 317 STARTING AND OPERATING 315 required. However, the conventional brake system will working properly. This self-check occurs each time the continue to operate normally if the “Brake Warning vehicle is started and accelerated past 7 mph (11 km/h). Light” is not on. ABS is activated during braking under certain road or If the “ABS Warning Light”...
Page 318: Electronic Brake Control System
316 STARTING AND OPERATING (HSA), and Electronic Stability Control (ESC). All sys- WARNING! tems work together to enhance vehicle stability and control in various driving conditions and are commonly The Anti-Lock Brake System (ABS) contains sophis- referred to as ESC. ticated electronic equipment that may be susceptible to interference caused by improperly installed or Anti-Lock Brake System (ABS)
Page 319: Brake Assist System (Bas)
STARTING AND OPERATING 317 across a driven axle. If one wheel on a driven axle is “pump” the brakes). Do not reduce brake pedal pressure spinning faster than the other, the system will apply the unless braking is no longer desired. Once the brake pedal brake of the spinning wheel.
Page 320: Electronic Roll Mitigation (Erm)
318 STARTING AND OPERATING Electronic Roll Mitigation (ERM) NOTE: Anytime the ESC system is in the “Full Off” This system anticipates the potential for wheel lift by mode, ERM is disabled. Refer to “Electronic Stability monitoring the driver’s steering wheel input and the Control (ESC)”...
Page 321: Hill Descent Control (Hdc) - If Equipped
STARTING AND OPERATING 319 Hill Descent Control (HDC) – If Equipped Off” button for five seconds. Refer to “Electronic Stability This system maintains vehicle speed while descending Control (ESC)” in this section of the manual. hills during off-road driving situations. HDC will auto- HDC operation can be overridden with brake application matically apply the brakes to control downhill speed to to slow the vehicle down below the HDC control speed.
Page 322: Hill Start Assist (Hsa) - Manual Transmission Only
320 STARTING AND OPERATING HSA Activation Criteria WARNING! The following criteria must be met in order for HSA to activate: HDC is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver • Vehicle must be stopped. must remain attentive to the driving conditions and •...
Page 323 STARTING AND OPERATING 321 Disabling/Enabling HSA 5. Release the clutch pedal. If you wish to turn on or off the HSA system, it can be 6. Rotate the steering wheel one-half turn to the left. done using the Customer Programmable Features in the Electronic Vehicle Information Center (EVIC).
Page 324: Electronic Stability Control (Esc)
322 STARTING AND OPERATING Electronic Stability Control (ESC) WARNING! This system enhances directional control and stability of • The Electronic Stability Control (ESC) cannot pre- the vehicle under various driving conditions. ESC cor- vent the natural laws of physics from acting on the rects for over-steering or under-steering of the vehicle by vehicle, nor can it increase the traction afforded by applying the brake of the appropriate wheel to assist in...
Page 325 STARTING AND OPERATING 323 Full On (Four-Wheel Drive Models) Or On To turn ESC on again, momentarily press the “ESC Off” (Two-Wheel Drive Models) switch. This will restore the normal “ESC On” mode of This is the normal operating mode for ESC. Whenever operation.
Page 326 324 STARTING AND OPERATING “ESC OFF” message will appear in the odometer. Press WARNING! and release the Trip Odometer button located on the instrument cluster to clear this message. When in “Partial Off” mode, the TCS functionality of ESC, (except for the limited slip feature described in In this mode, ESC and TCS, except for the “limited slip”...
Page 327: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
STARTING AND OPERATING 325 NOTE: The “ESC OFF” message will display and an ESC Activation/Malfunction Indicator Light And audible chime will sound when the shift lever is placed ESC OFF Indicator Light into the PARK position from any other position, and then The “ESC Activation/Malfunction Indicator moved out of the PARK position.
Page 328: Tire Safety Information
326 STARTING AND OPERATING Malfunction Indicator Light” begins to flash during ac- TIRE SAFETY INFORMATION celeration, ease up on the accelerator and apply as little Tire Markings throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: •...
Page 329 STARTING AND OPERATING 327 NOTE: tires is the same as for P-Metric tires except for the • P (Passenger) - Metric tire sizing is based on U.S. letters “LT” that are molded into the sidewall preced- design standards. P-Metric tires have the letter “P” ing the size designation.
Page 330 328 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 331 STARTING AND OPERATING 329 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 332: Tire Identification Number (Tin)
330 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 333: Tire Terminology And Definitions
STARTING AND OPERATING 331 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 334: Tire Loading And Tire Pressure
332 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door.
Page 335 STARTING AND OPERATING 333 axles must not be exceeded. For further information on This placard tells you important information about GAWRs, vehicle loading, and trailer towing, refer to the: “Vehicle Loading” in this section. 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of...
Page 336 334 STARTING AND OPERATING 3. Subtract the combined weight of the driver and pas- NOTE: • The following table shows examples on how to calcu- sengers from XXX lbs or XXX kg. late total load, cargo/luggage, and towing capacities 4. The resulting figure equals the available amount of of your vehicle with varying seating configurations cargo and luggage load capacity.
Page 337 STARTING AND OPERATING 335...
Page 338: Tires - General Information
336 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 339: Tire Inflation Pressures
STARTING AND OPERATING 337 Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the left • Unequal tire pressures from one side of the ve- side “B” Pillar or rear edge of the driver’s side door. hicle to the other can cause the vehicle to drift to Some vehicles may have Supplemental Tire Pressure the right or left.
Page 340 338 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the Winter.
Page 341: Tire Pressures For High Speed Operation
STARTING AND OPERATING 339 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 342: Compact Spare Tire - If Equipped
340 STARTING AND OPERATING vehicle. If your vehicle has this option refer to an Compact Spare Tire – If Equipped authorized tire dealer for the recommended tire rotation The compact spare is for temporary emergency use only. pattern. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on If your vehicle is not equipped with an original equip- the Tire and Loading Information Placard located on the...
Page 343: Full Size Spare - If Equipped
STARTING AND OPERATING 341 your original equipment tire, replace (or repair) the WARNING! original equipment tire and reinstall on the vehicle at the first opportunity. Compact spares are for temporary emergency use only. With these spares, do not drive more than Limited-Use Spare –...
Page 344: Tire Spinning
342 STARTING AND OPERATING Refer to “Freeing A Stuck Vehicle” in “What To Do In WARNING! Emergencies” for further information. Limited-use spares are for emergency use only. In- WARNING! stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the Fast spinning tires can be dangerous.
Page 345: Life Of Tire
STARTING AND OPERATING 343 Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and the spare tire should be replaced after six years, regardless of the remaining tread.
Page 346: Starting And Operating
344 STARTING AND OPERATING Replacement Tires It is recommended to replace the two front tires or two The tires on your new vehicle provide a balance of many rear tires as a pair. Replacing just one tire can seriously characteristics. They should be inspected regularly for affect your vehicle’s handling.
Page 347 STARTING AND OPERATING 345 WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 348: Tire Chains
346 STARTING AND OPERATING TIRE CHAINS Snow tires generally have lower speed ratings than what Due to limited clearance, tire chains are not recom- was originally equipped with your vehicle and should mended. not be operated at sustained speeds over 75 mph (120 km/h).
Page 349 STARTING AND OPERATING 347 These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow and wet traction levels, and contribute to a smooth, quiet ride.
Page 350: Tire Pressure Monitoring System (Tpms)
348 STARTING AND OPERATING TIRE PRESSURE MONITORING SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if The Tire Pressure Monitor System (TPMS) will warn the the tire pressure falls below the low-pressure warning driver of a low tire pressure based on the vehicle recom- limit for any reason, including low temperature effects, or mended cold placard pressure.
Page 351 STARTING AND OPERATING 349 For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure • The TPMS has been optimized for the original of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels.
Page 352: Base System
350 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, NOTE: • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance or to provide warning of a tire failure the tire.
Page 353 STARTING AND OPERATING 351 • Four Tire Pressure Monitoring Sensors Check TPMS Warnings The Tire Pressure Monitoring Telltale Light will flash on • Tire Pressure Monitoring Telltale Light and off for 75 seconds and remain on solid when a system Tire Pressure Monitoring Low Pressure Warnings fault is detected.
Page 354: Premium System - If Equipped
352 STARTING AND OPERATING NOTE: Your vehicle is equipped with a compact spare 5. Once you repair or replace the original road tire and wheel and tire assembly. reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the Tire 1.
Page 355 STARTING AND OPERATING 353 The TPMS consists of the following components: message for a minimum of five seconds and a graphic of the pressure value(s) with the low tire(s) flashing. • Receiver Module • Four Tire Pressure Monitoring Sensors • Three Trigger Modules (mounted in three of the four wheel wells) •...
Page 356 354 STARTING AND OPERATING display to the vehicle’s recommended cold placard pres- sure value. The system will automatically update, the “LOW TIRE” text message will no longer be displayed, the graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received.
Page 357 STARTING AND OPERATING 355 will be displayed instead of dashes. A system fault can pressure values still shown. This indicates that the pres- occur with any of the following scenarios: sure values are still being received from the TPM sensors but they may not be located in the correct vehicle 1.
Page 358: General Information
356 STARTING AND OPERATING 3. However, after driving the vehicle for up to 20 min- limit in any of the four active road tires. The vehicle may utes above 15 mph (24 km/h), the Tire Pressure Moni- need to be driven for up to 20 minutes above 15 mph toring Telltale Light will flash on and off for 75 seconds (24 km/h) in order for the TPMS to receive this and then remain on solid.
Page 359: Fuel Requirements
STARTING AND OPERATING 357 FUEL REQUIREMENTS Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the World- 2.0L And 2.4L Engine wide Fuel Charter, WWFC) which define fuel properties This engine is designed to meet all emis- necessary to deliver enhanced emissions, performance, sions regulations and provide excellent and durability for your vehicle.
Page 360: Gasoline/Oxygenate Blends
358 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain- genates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol may be used in your vehicle.
Page 361: Mmt In Gasoline
STARTING AND OPERATING 359 • drain the fuel tank (see your authorized dealer) Materials Added To Fuel All gasoline sold in the United States is required to More extensive repairs will be required for prolonged contain effective detergent additives. Use of additional exposure to E-85 fuel.
Page 362: Carbon Monoxide Warnings
360 STARTING AND OPERATING Carbon Monoxide Warnings CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition WARNING! malfunctions can cause the catalytic converter to Carbon monoxide (CO) in exhaust gases is deadly. overheat. If you notice a pungent burning odor or Follow the precautions below to prevent carbon some light smoke, your engine may be out of tune monoxide poisoning:...
Page 363: Adding Fuel
STARTING AND OPERATING 361 After removing the gas cap, place the gas cap tether cable WARNING! (Continued) over a hook on the inside of the fuel door. This keeps the • Guard against carbon monoxide with proper gas cap suspended away from and protects the vehicle’s maintenance.
Page 364 362 STARTING AND OPERATING CAUTION! WARNING! (Continued) • Never add fuel when the engine is running. This is • Damage to the fuel system or emission control in violation of most state and Federal fire regula- system could result from using an improper fuel tions and may cause the MIL to turn on.
Page 365: Loose Fuel Filler Cap Message
STARTING AND OPERATING 363 Loose Fuel Filler Cap Message Vehicle Certification Label If the vehicle diagnostic system determines that the fuel Your vehicle has a Vehicle Certification Label attached to filler cap is loose or improperly installed, a “gASCAP” the driver’s door B-Pillar. message will be displayed in the Odometer/Trip Odom- The label contains the following information: eter in the instrument cluster.
Page 366 364 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) Curb Weight The GVWR is the total allowable weight of your vehicle. The curb weight of a vehicle is defined as the total weight This includes driver, passengers, and cargo. The total of the vehicle with all fluids, including vehicle fuel, at full load must be limited so that you do not exceed the capacity conditions, and with no occupants or cargo...
Page 367: Trailer Towing
STARTING AND OPERATING 365 Overloading can cause potential safety hazards and TRAILER TOWING shorten useful service life. Heavier suspension compo- In this section you will find safety tips and information nents do not necessarily increase the vehicle’s GVWR. on limits to the type of towing you can reasonably do with your vehicle.
Page 368 366 STARTING AND OPERATING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Gross Axle Weight Rating (GAWR) Certification Label” in “Starting and Operating” for The GAWR is the maximum capacity of the front and rear further information. axles. Distribute the load over the front and rear axles evenly.
Page 369 STARTING AND OPERATING 367 Frontal Area Weight-Distributing Hitch The frontal area is the maximum height multiplied by the A weight-distributing system works by applying lever- maximum width of the front of a trailer. age through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight to Trailer Sway Control the tow vehicle’s front axle and the trailer axle(s).
Page 370: Trailer Hitch Classification
368 STARTING AND OPERATING Trailer Hitch Classification Trailer Hitch Classification Definitions Your vehicle may be factory equipped for safe towing of Class Max. Trailer Hitch Industry trailers weighing over 2,000 lbs (907 kg) with the optional Standards Trailer Tow Prep Package. See your authorized dealer for Class I - Light Duty 2,000 lbs (907 kg) package content.
Page 371: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 369 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg)
Page 372: Trailer And Tongue Weight
370 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 373: Towing Requirements
STARTING AND OPERATING 371 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options, or authorized dealer-installed trailer is towed, do not drive over 50 mph options, must be considered as part of the total load on (80 km/h) and do not make starts at full throttle.
Page 374 372 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Make certain that the load is secured in the trailer • Vehicles with trailers should not be parked on a and will not shift during travel. When trailering grade. When parking, apply the parking brake on cargo that is not fully secured, dynamic load shifts the tow vehicle.
Page 375 STARTING AND OPERATING 373 Towing Requirements – Tires replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s − Do not attempt to tow a trailer while using a compact GVWR and GAWR limits. spare tire. Towing Requirements –...
Page 376 374 STARTING AND OPERATING CAUTION! WARNING! (Continued) • Towing any trailer will increase your stopping If the trailer weighs more than 1,000 lbs (454 kg) distance. When towing you should allow for addi- loaded, it should have its own brakes and they tional space between your vehicle and the vehicle should be of adequate capacity.
Page 377 STARTING AND OPERATING 375 The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 —...
Page 378: Towing Tips
376 STARTING AND OPERATING Towing Tips − When using the speed control, if you experience speed Before setting out on a trip, practice turning, stopping drops greater than 10 mph (16 km/h), disengage until and backing the trailer in an area away from heavy you can get back to cruising speed.
Page 379: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 377 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing Condition Wheels OFF the Ground Manual Transmission Automatic Transmission Flat Tow None NOT ALLOWED • Transmission in NEUTRAL • Key in ACC Front OK (FWD Only) NOT ALLOWED Dolly Tow Rear NOT ALLOWED NOT ALLOWED...
Page 380 378 STARTING AND OPERATING CAUTION! • Do not flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. If these vehicles require towing, make sure all drive wheels are off the ground. • Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing.
Page 381: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....380 Jump-Starting Procedures ....392 ▫...
Page 382: Hazard Warning Flashers
380 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate action. •...
Page 383: Automatic Transmission Overheating
WHAT TO DO IN EMERGENCIES 381 CAUTION! WARNING! You or others can be badly burned by hot engine Driving with a hot cooling system could damage coolant (antifreeze) or steam from your radiator. If your vehicle. If the pointer rises to the H (red) mark, you see or hear steam coming from under the hood, the instrument cluster will sound a chime.
Page 384: Jacking And Tire Changing
382 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) • Never start or run the engine while the vehicle is WARNING! on a jack. • Do not attempt to change a tire on the side of the •...
Page 385: Jack Location
WHAT TO DO IN EMERGENCIES 383 Jack Location Spare Tire Removal The jack and jack-handle are stowed under the load floor Lift up the load floor cover and remove the hold down. in the cargo area. Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas.
Page 386: Jacking Instructions
384 WHAT TO DO IN EMERGENCIES 5. Turn OFF the ignition. WARNING! (Continued) 6. Block both the front and rear of the • Always park on a firm, level surface as far from wheel diagonally opposite the jacking the edge of the roadway as possible before raising position.
Page 387 WHAT TO DO IN EMERGENCIES 385 WARNING! (Continued) CAUTION! • If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on careful of motor traffic. locations other than those indicated in the Jacking •...
Page 388 386 WHAT TO DO IN EMERGENCIES two triangular cutouts on one of the flanges in the sill CAUTION! flange assembly. The rear location is the same but with two rectangular cutouts. For vehicles equipped with Do not attempt to raise the vehicle by jacking on plastic trim, the plastic has been cut away to expose the locations other than those indicated.
Page 389 WHAT TO DO IN EMERGENCIES 387 3. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed.
Page 390 388 WHAT TO DO IN EMERGENCIES 5. Remove the wheel nuts and pull the wheel and wheel covers, where applicable, off the hub. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel. Lightly tighten the nuts. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle...
Page 391 WHAT TO DO IN EMERGENCIES 389 NOTE: The wheel cover is held on the wheel by the WARNING! wheel nuts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the A loose tire or jack thrown forward in a collision or wheel cover onto the wheel, then install the wheel nuts.
Page 392: Road Tire Installation
390 WHAT TO DO IN EMERGENCIES Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem.
Page 393 WHAT TO DO IN EMERGENCIES 391 4. Install the remaining lug nuts with the cone shaped correct tightness, have them checked with a torque end of the nut toward the wheel. Lightly tighten the lug wrench by your authorized dealer or service station. nuts.
Page 394: Jump-Starting Procedures
392 WHAT TO DO IN EMERGENCIES 3. Lower the vehicle to the ground by turning the jack NOTE: When using a portable battery booster pack handle counterclockwise. follow the manufacturer’s operating instructions and precautions. 4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased CAUTION! leverage.
Page 395: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 393 Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. To access the battery remove the air intake duct by turning the two finger screws, located on the radiator support.
Page 396: Jump-Starting Procedure
394 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 397 WHAT TO DO IN EMERGENCIES 395 CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the cable to the negative post (-) of the damage to the charging system of the booster vehicle discharged battery. The resulting electrical spark or the discharged vehicle.
Page 398: Freeing A Stuck Vehicle
396 WHAT TO DO IN EMERGENCIES 8. Disconnect the opposite end of the positive (+) jumper FREEING A STUCK VEHICLE cable from the positive (+) post of the booster battery. If your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion.
Page 399: Shift Lever Override
WHAT TO DO IN EMERGENCIES 397 NOTE: If your vehicle is equipped with Traction Con- WARNING! trol or Electronic Stability Control (ESC), turn the system OFF before attempting to “rock” the vehicle. Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or CAUTION! even failure, of the axle and tires.
Page 400 398 WHAT TO DO IN EMERGENCIES 2. Remove the shift lever override access cover located 3. Turn the ignition switch to the ON/RUN position on the right side of the shifter housing. without starting the engine (engine OFF). 4. Press and maintain firm pressure on the brake pedal. 5.
Page 401: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 399 TOWING A DISABLED VEHICLE AUTOMATIC MANUAL Towing Condition Wheels OFF the Ground TRANSMISSION TRANSMISSION Transmission in Flat Tow NONE NOT ALLOWED NEUTRAL Rear NOT ALLOWED NOT ALLOWED Wheel Lift or Dolly Tow Front FWD Models ONLY FWD Models ONLY Flatbed BEST METHOD...
Page 402: Without The Ignition Key
400 WHAT TO DO IN EMERGENCIES • FWD vehicles can be towed with the front wheels CAUTION! elevated. Failure to follow these cautions could result in dam- • FWD or 4WD vehicles can be towed on a flatbed truck age to your vehicle: (all wheels OFF the ground).
Page 403: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 2.0L ... . . 403 Maintenance Procedures ....408 ▫...
Page 404 402 MAINTAINING YOUR VEHICLE ▫ Exhaust System ..... 419 Vehicle Storage ..... . . 442 ▫...
Page 405: Engine Compartment - 2.0L
MAINTAINING YOUR VEHICLE 403 ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 406: Engine Compartment - 2.4L
404 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Coolant Pressure Cap 3 — Engine Oil Fill 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 407: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 405 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 408: Emissions Inspection And Maintenance Programs
406 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the MIL.
Page 409: Replacement Parts
MAINTAINING YOUR VEHICLE 407 4. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced a.
Page 410: Dealer Service
Only do service work for which you mance. Immediately have potential malfunctions have the knowledge and the proper equipment. If examined by an authorized Chrysler Group LLC you have any doubt about your ability to perform a dealership or qualified repair center.
Page 411: Engine Oil
MAINTAINING YOUR VEHICLE 409 fully warmed engine is shut off. Do not check oil level CAUTION! (Continued) before starting the engine after it has sat overnight. • Your vehicle has been built with improved fluids Checking engine oil level when the engine is cold will that protect the performance and durability of give you an incorrect reading.
Page 412 410 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection for all engines under all types of operating conditions, the Do not overfill the engine. Overfilling the engine manufacturer recommends engine oils that are API Cer- will cause oil aeration, which can lead to loss of oil tified and meet the requirements of Chrysler Material pressure and an increase in oil temperature.
Page 413 MAINTAINING YOUR VEHICLE 411 Synthetic Engine Oils CAUTION! You may use synthetic engine oils provided the recom- mended oil quality requirements are met, and the recom- Do not use chemical flushes in your engine oil as the mended maintenance intervals for oil and filter changes chemicals can damage your engine.
Page 414: Engine Oil Filter
412 MAINTAINING YOUR VEHICLE Engine Oil Filter WARNING! The engine oil filter should be replaced with a new filter at every engine oil change. The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air Engine Oil Filter Selection cleaner unless such removal is necessary for repair or All of this manufacturer’s engines have a full-flow type...
Page 415: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 413 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
Page 416: Air Conditioner Maintenance
414 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a performance positive post and the negative cable is attached to...
Page 417 MAINTAINING YOUR VEHICLE 415 Refrigerant Recovery And Recycling WARNING! R-134a air conditioning refrigerant is a hydrofluoro- • Use only refrigerants and compressor lubricants carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. How- approved by the manufacturer for your air condi- ever, the manufacturer recommends that air conditioning tioning system.
Page 418 416 MAINTAINING YOUR VEHICLE The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedure to re- place the filter: 1. Open the glove compartment and remove all contents. 2. Push in on the sides of the glove compartment and lower the door.
Page 419: Body Lubrication
MAINTAINING YOUR VEHICLE 417 hood latching components to ensure proper function. CAUTION! When performing other underhood services, the hood latch, release mechanism and safety catch should be The A/C air filter is identified with an arrow to cleaned and lubricated. indicate airflow direction through the filter.
Page 420: Adding Washer Fluid
418 MAINTAINING YOUR VEHICLE from a dry windshield. Avoid using the wiper blades to When refilling the washer fluid reservoir, take some remove frost or ice from the windshield. Make sure that washer fluid and apply it to a cloth or towel and wipe they are not frozen to the glass before turning them on to clean the wiper blades, this will help blade performance.
Page 421: Exhaust System
MAINTAINING YOUR VEHICLE 419 Exhaust System WARNING! The best protection against carbon monoxide entry into • Exhaust gases can injure or kill. They contain the vehicle body is a properly maintained engine exhaust system. carbon monoxide (CO), which is colorless and odorless.
Page 422 420 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
Page 423: Cooling System
MAINTAINING YOUR VEHICLE 421 To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, • When working near the radiator cooling fan, dis- when the transmission is in gear and the vehicle is in motion.
Page 424 422 MAINTAINING YOUR VEHICLE rusty in appearance, the system should be drained, Selection Of Coolant flushed and refilled with fresh engine coolant (anti- Refer to “Fluids, Lubricants, and Genuine Parts” in freeze). Check the front of the A/C condenser for any “Maintaining Your Vehicle”...
Page 425 MAINTAINING YOUR VEHICLE 423 Please review these recommendations for using Hybrid CAUTION! (Continued) Organic Additive Technology (HOAT) engine coolant • Do not use water alone or alcohol based engine (antifreeze). When adding engine coolant (antifreeze): coolant (antifreeze) products. Do not use addi- •...
Page 426 424 MAINTAINING YOUR VEHICLE Please note that it is the owner’s responsibility to main- WARNING! tain the proper level of protection against freezing ac- • The warning words “DO NOT OPEN HOT” on cording to the temperatures occurring in the area where the vehicle is operated.
Page 427 MAINTAINING YOUR VEHICLE 425 Disposal Of Used Engine Coolant The radiator normally remains completely full, so there is Used ethylene glycol-based engine coolant (antifreeze) is no need to remove the radiator cap unless checking for a regulated substance requiring proper disposal. Check the coolant freeze point or replacing the engine coolant with your local authorities to determine the disposal (antifreeze).
Page 428: Brake System
426 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be bottle overflow hoses are not kinked or obstructed. safely driven.
Page 429 MAINTAINING YOUR VEHICLE 427 when the pads are replaced. However, low fluid level WARNING! may be caused by a leak and a checkup may be needed. Riding the brakes can lead to brake failure and NOTE: If your vehicle is equipped with a manual possibly a collision.
Page 430 428 MAINTAINING YOUR VEHICLE WARNING! WARNING! (Continued) • To avoid contamination from foreign matter or • Use only manufacturer’s recommended brake moisture, use only new brake fluid or fluid that fluid. Refer to “Fluids, Lubricants, and Genuine has been in a tightly closed container. Keep the Parts”...
Page 431: Automatic Transmission (Cvt) - If Equipped
MAINTAINING YOUR VEHICLE 429 Automatic Transmission (CVT) – If Equipped WARNING! (Continued) Selection Of Lubricant • Do not allow petroleum based fluid to contami- It is important that the proper lubricant is used in the nate the brake fluid. Brake seal components could transmission to assure optimum transmission perfor- be damaged, causing partial or complete brake mance.
Page 432: Manual Transmission - If Equipped
430 MAINTAINING YOUR VEHICLE Special Additives level checked immediately. Operation with incorrect Do not add any materials (other than leak detection dyes) fluid level can cause severe transmission damage. to Continuously Variable Transmission (CVT) Fluid Fluid And Filter Changes (CVTF+4 ). CVTF+4 is an engineered product and its Refer to the “Maintenance Schedule”...
Page 433: Rear Drive Assembly (Rda) - Awd/4Wd Models Only
MAINTAINING YOUR VEHICLE 431 Frequency Of Fluid Change fill plug. The fluid level should be maintained between Under normal operating conditions, the fluid installed at the bottom of the fill hole to 1/8 in (4 mm) below the fill the factory will give satisfactory lubrication for the life of hole.
Page 434: Appearance Care And Protection From Corrosion
432 MAINTAINING YOUR VEHICLE the fill plug. The fluid level should be maintained be- hot or cold weather and other extreme conditions will tween the bottom of the fill hole to 1/8 in (4 mm) below have an adverse effect on paint, metal trim, and under- the fill hole.
Page 435 MAINTAINING YOUR VEHICLE 433 Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR Car Wash or a mild such as steel wool or scouring powder, which will car wash soap, and rinse the panels completely with scratch metal and painted surfaces.
Page 436 434 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care touch them up immediately. The cost of such repairs is • All wheels and wheel trim, especially aluminum and considered the responsibility of the owner.
Page 437 MAINTAINING YOUR VEHICLE 435 Stain Repel Fabric Cleaning Procedure – If Interior Care Equipped Use MOPAR Total Clean or equivalent to clean fabric Stain Repel seats may be cleaned in the following man- upholstery and carpeting. ner: Use MOPAR Total Clean or equivalent to clean vinyl •...
Page 438 436 MAINTAINING YOUR VEHICLE Glass Surfaces WARNING! All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner or any commercial Do not use volatile solvents for cleaning purposes. household-type glass cleaner. Never use an abrasive type Many are potentially flammable, and if used in cleaner.
Page 439 MAINTAINING YOUR VEHICLE 437 Instrument Panel Bezels Seat Belt Maintenance Do not bleach, dye or clean the seat belts with chemical CAUTION! solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. When installing hanging air fresheners in your ve- If the seat belts need cleaning, use a mild soap solution or hicle, read the installation instructions carefully.
Page 440: Fuses
438 MAINTAINING YOUR VEHICLE FUSES Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A number that identifies each component may be displayed on the inside of the cover.
Page 441 MAINTAINING YOUR VEHICLE 439 Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 10 Amp Rear Center Brake 40 Amp Power Seats Light Switch Green 10 Amp Ignition Switch/ 20 Amp Power Locks Occupant Classifica- Yellow tion Module 15 Amp Power Outlet 20 Amp...
Page 442 440 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 10 Amp Wireless Control 10 Amp Heated Mirror – If Module Equipped 40 Amp Auto Shutdown Relay 15 Amp Auto Shutdown Relay Green Lt Blue 20 Amp Radio Amplifiers 10 Amp...
Page 443 MAINTAINING YOUR VEHICLE 441 Cavity Cartridge Mini- Description CAUTION! Fuse Fuse • When installing the IPM cover, it is important to 10 Amp ABS Module/J1962 ensure the cover is properly positioned and fully Diagnostic Link/ latched. Failure to do so may allow water to get Powertrain Control Module into the IPM, and possibly result in an electrical...
Page 444: Vehicle Storage
442 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you will not be using your vehicle for more than All the inside bulbs are brass or glass wedge base. 21 days, you may want to take steps to preserve your Aluminum base bulbs are not approved and should not battery.
Page 445: Bulb Replacement
MAINTAINING YOUR VEHICLE 443 3. Remove green connector from back of bulb by pulling LIGHTS BULBS – Exterior Bulb No. straight back. Front Fog Lamp ......H11 Center High Mounted Stop 4.
Page 446: Rear Turn Signal And Backup Lamp
444 MAINTAINING YOUR VEHICLE Rear Turn Signal And Backup Lamp 3. Twist and remove socket from lamp. 1. Remove the two push-pins from the taillamp housing. 4. Remove bulb from socket and replace. License Lamps 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp from the liftgate.
Page 447: Fluid Capacities
MAINTAINING YOUR VEHICLE 445 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOPAR Engine Coolant/Antifreeze 7.2 Quarts 6.8 Liters 5 Year/100,000 Mile Formula or equivalent)
Page 448: Fluids, Lubricants, And Genuine Parts
446 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 449: Chassis
MAINTAINING YOUR VEHICLE 447 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission (CVT) – MOPAR CVTF+4 Continuously Variable Transmission Fluid If Equipped Manual Transmission – If Equipped MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Rear Drive Assembly (RDA) MOPAR Gear &...
Page 451 MAINTENANCE SCHEDULES CONTENTS Maintenance Schedule ....450 ▫ Required Maintenance Intervals ..452...
Page 452 450 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE On Non-EVIC equipped vehicles, “Change Oil” will flash The Scheduled Maintenance services listed in this in the instrument cluster odometer and a single chime manual must be done at the times or mileages specified will sound, indicating that an oil change is necessary. to protect your vehicle warranty and ensure the best Based on engine operation conditions, the oil change vehicle performance and reliability.
Page 453 MAINTENANCE SCHEDULES 451 NOTE: referring to the steps described under “Electronic Vehicle • The oil change indicator message will not monitor the Information Center (EVIC)/Oil Change Required” in time since the last oil change. Change your vehicle’s “Understanding Your Instrument Panel” or under “In- oil if it has been six months since your last oil change, strument Cluster Description/Odometer/Trip Odom- even if the oil change indicator message is NOT...
Page 454 452 MAINTENANCE SCHEDULES Once A Month At Each Oil Change • Check the tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required.
Page 455 MAINTENANCE SCHEDULES 453 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 456: Service Schedule
454 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 457 MAINTENANCE SCHEDULES 455 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 458 456 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 459 MAINTENANCE SCHEDULES 457 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 460 458 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer Reading Date Repair Order #...
Page 461 MAINTENANCE SCHEDULES 459 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 462 460 MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 463 MAINTENANCE SCHEDULES 461 120,000 Miles (195,000 km) or 128,000 Miles (208,000 km) or 96 Months Maintenance Service 90 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 464 462 MAINTENANCE SCHEDULES 136,000 Miles (221,000 km) or 144,000 Miles (234,000 km) or 108 Months Maintenance Service 102 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 465 MAINTENANCE SCHEDULES 463 152,000 Miles (247,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 152,000 miles (247 000 km). Odometer Reading Date Repair Order #...
Page 466 464 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Page 467: If You Need Consumer Assistance
If You Need Assistance ....467 Reporting Safety Defects ....470 ▫ Chrysler Group LLC Customer Center ..468 ▫ In The 50 United States And Washington, D.C.
Page 468 466 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 473 Department Of Transportation Uniform Tire Quality Grades ......473 ▫...
Page 469: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 467 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 470: Chrysler Group Llc Customer Center
468 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (877) 426–5337...
Page 471: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 469 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 472: Warranty Information
See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 473: In Canada
IF YOU NEED CONSUMER ASSISTANCE 471 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, a group of vehicles, it may order a recall and remedy you should contact the Customer Service Department campaign.
Page 474 Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles. Included are starting, operating, emergency LLC vehicles. A complete working knowledge of the...
Page 475 IF YOU NEED CONSUMER ASSISTANCE 473 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 476 474 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 477 INDEX...
Page 478 476 INDEX ABS (Anti-Lock Brake System) ....314 Airbag, Window (Side Curtain) ... 65,67,70 Adding Engine Coolant (Antifreeze) ..423 Alarm Light .
Page 479 INDEX 477 Automatic Transmission ....299,429 Warning Light ..... . . 199 Fluid and Filter Changes .
Page 480 478 INDEX Cargo Compartment Clean Air Gasoline ..... . . 357 Light ......182 Cleaning Cargo Light .
Page 481 INDEX 479 Cooling System ......421 Diagnostic System, Onboard ....405 Adding Coolant (Antifreeze) .
Page 482 480 INDEX Electronic Roll Mitigation ....318 Oil Change Interval ....410 Traction Control System .
Page 483 INDEX 481 Flashers ......380 Fuel ......357,446 Hazard Warning .
Page 484 482 INDEX Garage Door Opener (HomeLink®) ... 160 Hands-Free Phone (Uconnect™) ....98 Gas Cap (Fuel Filler Cap) ... . 361,363,405 Hazard Warning Flasher .
Page 485 INDEX 483 HomeLink® (Garage Door Opener) Transmitter . . . 160 Jack Location ......383 Hood Release .
Page 486 484 INDEX Life of Tires ......343 Fog ......149,208,443 Liftgate (Sedan) .
Page 487 INDEX 485 Loading Vehicle ..... . 363,365 Frequency of Fluid Change ... 431,432 Capacities .
Page 488 486 INDEX Monitor, Tire Pressure System ....348 Filter ......412 Mopar Parts .
Page 489 INDEX 487 Phone, Hands-Free (Uconnect™) ....98 Radial Ply Tires ......339 Placard, Tire and Loading Information .
Page 490 488 INDEX Remote Starting System ....26 Satellite Radio Antenna ....239,263 Replacement Bulbs .
Page 491 INDEX 489 Rear Folding (Sedan) ....144 Signals, Turn ..... . 88,197,444 Seatback Release .
Page 492 490 INDEX Steering Wheel Mounted Tie Down Hooks, Cargo ....185 Sound System Controls ....273 Tilt Steering Column .
Page 493 INDEX 491 Pressure Warning Light ....203 Trailer Towing ......365 Quality Grading .
Page 494 492 INDEX Transporting Pets ......84 Vehicle Identification Number (VIN) ... . 7 Tread Wear Indicators .
Page 495 INDEX 493 Wheel and Wheel Trim Care ....434 Windshield Defroster ....87,278,284 Wind Buffeting .
Page 496 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use only frequency signals.
Page 497 Chrysler Group LLC 12MK49-126-AC-R3 3rd Edition Printed in U.S.A.

Jeep 2012 Compass Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Jeep 2012 Compass Jeep

Summary of Contents for Jeep 2012 Compass Jeep