Download Print this page

Merco SW-2624 Operator's Manual

Single & two-tier sandwich warmers sw & 2tsw series
Hide thumbs Also See for SW-2624:

Advertisement

Quick Links

operator manual
Single & Two-Tier Sandwich Warmers
SW & 2TSW Series
This document includes:
• Mounting Type Information
• Installation Instructions
• Operating Instructions
• Cleaning Instructions
• Warranty Statement
P/N: 000354
Revision: C
Shown without 4" legs (provided)
Merco, LLC
1111 North Hadley Road
Fort Wayne, Indiana 46804
United States of America
Technical Support Hotline: (800) 678-9511
Telephone: (260) 459-8200
www.mercosavory.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the SW-2624 and is the answer not in the manual?

Questions and answers

Summary of Contents for Merco SW-2624

  • Page 1 • Operating Instructions • Cleaning Instructions • Warranty Statement P/N: 000354 Revision: C Shown without 4” legs (provided) Merco, LLC 1111 North Hadley Road Fort Wayne, Indiana 46804 United States of America Technical Support Hotline: (800) 678-9511 Telephone: (260) 459-8200...
  • Page 2: Before Installation

    In Other Countries: Freight terms will be developed and extended on an individual basis. Failure to follow these instructions will negate Merco’s or your ability to fi le claims and receive compensation for shipping damage.
  • Page 3: Specifications

    VOLTAGE / AMPS LENGTH NET WT** SHIP WT** SHIP VOL** MODEL WATTS INCHES / CM LBS/KG LBS/KG CU FT / CU M 120V 120/208V 120/240V SW-2624 26/66.0 70/31.8 10/45.4 9.5/0.27 SW-3824 11.8 1420 38/96.5 110/49.9 150/68.1 13.5/0.38 SW-5024 15.0 1800 50/127.0...
  • Page 4: Operation

    OPERATION On/Off Switch controls lights. Controls the upper tubular heating element(s) and lower heating shelf. Illuminated Pilot Light indicates that tubular heating element(s) are on. Controls warming shelf. Illuminated Pilot Light indicates that the shelf is on. The factory recommends setting the heat control knobs (2 & 4) between the numbers four (4) and six (6) on the control panel depending on the ambient temperature.
  • Page 5 EZ TUBE INSTALLATION AND REPLACEMENT INSTRUCTIONS Prior to replacing a heat tube, make sure the contact is clean. If it is burnt or dirty, replace CAUTION: the socket. Remove the tube guard by pushing Place the left tip of the tube under the against the face of the warmer with left white socket (receptacle of the terminal).
  • Page 6 (ii) at Merco’s option, the refund of the amount paid for said equip- ment or services. Any breach by Merco with respect to any item or unit of equipment or services shall be deemed a breach with respect to that item or unit or service only.
  • Page 7 This page intentionally left blank.