Zte Telstra 4G User Manual page 34

Turn Wi-Fi On and Connect to a Wi-Fi Network
1. Touch
2. Slide the Wi-Fi switch to the ON position to turn on Wi-Fi.
The Wi-Fi networks that your tablet has detected are displayed
with their names and security settings. If your tablet finds a
network that you connected to previously, it connects to it.
3. Touch a network name to connect to it.
NOTE: If the network is secured, you're prompted to enter a
password or other credentials. (Ask your network administrator for
details.)
Get Notified of Open Networks
1. Touch
2. Slide the Wi-Fi switch to the ON position.
3. Touch
4. Tick the Network notification check box.
When Wi-Fi is on, you receive notifications in the Status bar
when your tablet detects an open Wi-Fi network. Clear the
check box to turn off notifications.
Add a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast its
name (SSID), or to add a Wi-Fi network when you are out of
range.
To connect to a secured network, you first need to get the security
details from the network's administrator.
> > Settings > Wi-Fi.
> > Settings > Wi-Fi.
> Advanced.
34