Table of Contents
Advertisement
Problem solving guide
Water drainage fault
Problem
The dishwasher stops
during a programme.
The Inlet/Drain check
indicator flashes.
Fault code shows in
the display.
66
Cause and remedy
Before rectifying the problem:
Switch the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
Advertisement
Table of Contents
