Table of Contents
Advertisement
Handsfree Monitoring
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Handsfree Monitoring
Calls placed on hold by an outside party may be monitored handsfree. This feature frees you
from having to hold the handset to your ear until the outside party returns to the call.
To use handsfree monitoring
1. Press and hold
(
2. Place the handset
on-hook.
3. Release
4. Lift the handset when
the party returns.
46
If you have a speakerphone, the performance is better if you
press the called [DN] button first.
Notes
A [DN] must be pressed or the handset must be taken off-
hook to actually answer the call. This is necessary before
transferring or placing an internal call on hold.
You can press
Answerback caller's voice and ring tone (see "The Grand
Tour" on Page 1 for more information).
The SPKR LED lights red.
.
The SPKR LED stays on and you can hear the other party
through your telephone speaker.
(
.
For privacy, press
your conversations may be heard.
Note
to control the volume of the Handsfree
to turn the microphone off, otherwise,
Your telephone's
can be set in system
programming to switch ON/OFF with one touch, to
switch OFF only while pressed and held, or to be either
ON/OFF at the start of handsfree dialing. See your
System Administrator if you want the setting changed.
UST DK Electronic Telephone
Advertisement
Table of Contents
