Eggtimer Rocketry Eggtimer User Manual page 44

Appendix A – Special Functions
There are some special functions that are accessed from the 0tings screen that are not on the
menu. In general, you will probably not need to use these functions very often, if at all, but you
need to be aware of them in case you do.
Master Reset
A master reset completely clears all flight memory, and resets the flight settings to the defaults.
The default settings are:
Launch Detect Altitude: 200
Ascent Samples/sec:
Interval (ms):
Descent Samples/sec:
Interval (ms):
Main Enable:
Main Altitude:
Main ON-Time:
CHB Enable:
CHB ON-Time:
Burn Timer:
Airstart Delay:
Airstart Min Velocity:
Telemetry:
To perform a Master Reset, hold the Ctrl and Y keys down together at the Flight Settings screen,
you will then see this screen:
Eggtimer Build-1.48b
DO YOU REALLY WANT TO CLEAR ALL FLIGHT MEMORY???
To perform the reset, you need to hold the Button on the Eggtimer down for at least 10 seconds.
When you do, you will hear a long confirmation tone, then you will see a progress screen as the
memory pages are reset. Leave the Eggtimer alone until the process is complete. When the
reset is complete, you will see "Master Reset Completed", you need to reset or power down the
Eggtimer before you can use it.
10
1000
2
500
0 (off)
300
2
0 (off)
2
2000
0
0
0 (off)
Master Reset
**** WARNING ****
Press BUTTON for 10 seconds to Reset
- 44 -