Eggtimer Rocketry Eggtimer User Manual page 27

Release 1.48b board revc
Table of Contents

Advertisement

Pre-Programmed Flight Profiles
The Eggtimer has 8 pre-programmed flight profiles, in addition to the programming screen. These
are designed so that if you are out in the field and you want to set it up with a fairly standard flight
profile you can do it without having to use a computer. They are accessed by holding the button
down while the Eggtimer is beeping during the programming phase. As you continue to hold down
the button, you will first hear a long tone that confirms that you have entered the pre-programmed
flight selection mode, then you will hear short beeps that will count out the flight profile numbers in
succession. When it beeps out the profile that you want to use, simply release the button. It will
give you a long beep to indicate that it has confirmed your selection, then it will beep out the profile
number before it halts. As with any menu function, you will need to Reset the Eggtimer afterwards
in order to begin a flight.
The pre-programmed flight profiles look like this:
Profile No.
1
2
3
4
5
6
7
8
1 – Flight Recording Only, no deployment, low-medium power
2 – Flight Recording Only, no deployment, medium-high power
3 – Single Deployment at Nose-Over, low-medium power
4 – Single Deployment at Nose-Over, medium-high power
5 – Multiple Deployment, Main at 500', medium power
6 – Multiple Deployment, Main at 500', medium-high power
7 – Multiple Deployment, Main at 800', medium power
8 – Multiple Deployment, Main at 800', medium-high power
Note that the Comments field will contain the message "Default Flight <n>", where <n> is the
number of the flight profile.
You cannot and/or should not use the Pre-Programmed Flight Profiles for any of the following:
• LDAs other than 100 or 200 feet
• Ascent sample rates other than 10 or 20 samples/sec
• Descent sample rate other than 2 samples/sec
• Servo deployment on either channel
• Airstarts on Channel B, since you can't change the Burn Timer or the Airstart Delay
• Entering your own text into the Comments field
Ascent
LDA
Samples/Sec
100
10
200
20
100
10
200
20
200
10
200
20
200
10
200
20
- 27 -
Main Channel
CHB Channel
Off
Off
Nose-Over
Nose-Over
500'
Nose-Over
500'
Nose-Over
800'
Nose-Over
800'
Nose-Over
Off
Off
Off
Off

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flight computerEggtimer flight computer

Table of Contents