Appendix A: Scsi-Fc Router Specifications - HP SCSI-Fibre Channel Router Installation And User Manual

Table of Contents

Advertisement

Hewlett Packard

Appendix A: SCSI-FC Router Specifications

Applications
Provides connectivity between SCSI High Voltage Differential (HVD) and Fibre Channel equipment and vice versa.
Hardware Features
SCSI Connectivity
Protocol:
SCSI-2 Ultra-Wide Differential (40MB/sec); supports either initiator (host) or target (device) protocol.
Data Transfer Rate:
40MByte/sec (per SCSI-FC Router per SCSI Channel) burst
SCSI-2:
68-pin High Density
Device Support:
One HP3000 and One HP XLR1200
Supports:
Command Processing, Tagged Queuing, Scatter/Gather, Disconnect/Reconnect, Synchronous and Asynchronous
data transfer
Fibre Connectivity
Protocol:
Classes of Service:
Topology:
Data Transfer Rate:
Port Speed:
Short Wavelength Optical Cable
Data Rate:
Cable:
Distance:
Connector:
Long Wavelength Optical Cable
Data Rate:
Cable:
Distance:
Connector:
Copper Cable
Data Rate:
Cable:
Connector:
Distance:
Attachment
Compatible with HP3000
HP XLR1200 system
Technical Specifications
Maintenance
External Serial Port
RJ-11 connector (57K baud rate)
Environment
Operating Temperature
Storage Temperature
Relative Humidity
Tabletop
Dimensions
Height: 7.62 cm (3 in), Width10.795 cm (4.25 in), Depth 31.115 cm (12.25 in)
Weight
1.8 kg (3.97 lb)
Note: The SCSI-FC Router can also be installed into a rackmountable hub enclosure.
Power
100 - 240 VAC
50 - 60 Hz
0.75 - 0.50 A
User Interface
LED indicators
Revision 1.0.3
ANSI Fibre Channel (FC-PH) and ANSI Fibre Channel Arbitrated Loop (FC-AL)
Class 3
FC-AL (private or public), Point to Point
100MBytes/sec (per SCSI-FC Router per Fibre channel)
100Mbytes/sec
100Mbytes/sec burst
50 or 62.5 micron fibre optic
500 m (1640 ft) or 172m (564 ft)
Dual SC
100Mbytes/sec burst
9 micron fibre optic
10 km (6.2 miles)
Dual SC
100Mbytes/sec burst
Twinax
Two DB-9 or HSSDC
30m (98 ft) equalized: 20 m (65.6 ft) non-equalized
®
(Operating Systems MPE/iX 5.5 and MPE/iX 6.0)
0ºC (32ºF) to 40ºC (104ºF)
-40ºC (-40ºF) to 75ºC (167ºF)
10% to 95% non-condensing
SCSI-Fibre Channel Router Installation and User Guide
®
Page 17

Advertisement

Table of Contents
loading

Table of Contents