IR Extenders
IR Blaster
IR Sockets
IR Blaster: Plug in the IR blaster here to emit all IR command signals received from the IR receiver to control the
source devices.
IR Receiver: Plug in the IR receiver here to receive all IR command signals from the IR remote controls of the
source devices.
CAUTION!
Wrongly insert IR blaster and IR receiver to wrong 3.5mm infrared sockets may result in the failure of
the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets.
Definition of IR Earphone Jack
IR Blaster
You can buy any IR extension cables in the market that are compatible to the definition of the IR sockets for
the matrix if necessary for replacement use. However, IR cables longer than 2m (6-ft) may not work.
IR Pass-through
IR Receiver
5
IR Receiver