Subscribe to Our Youtube Channel
Related Manuals for Satson HDMI-EXT-0103C-SET
Summary of Contents for Satson HDMI-EXT-0103C-SET
- Page 1 HDMI-EXT-0103C-SET HDMI 1.3 over CAT5 Extender with IR Pass-through User Manual Made in Taiwan...
-
Page 2: Safety And Notice
However, like all electronic equipments, the HDMI-EXT-0103C-SET should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. - Page 3 Introduction The HDMI-EXT-0103C-SET HDMI 1.3 over CAT5 Extender with IR Pass-through boosts up your HDMI transmission distance up to 60m (200ft) in HDTV 720p / 1080i format. With two low cost Cat-5/5e/6 cables, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to remote HDMI displays such as HDTV, LCD PC monitors, or projectors.
-
Page 4: Specifications & Package Contents
1 Watt [max] Operation temperature 0~40°C [32~104°F] Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] 1x HDMI-EXT-0103C-SET [TX & RX] 1x IR blaster Package Contents 1x IR receiver 1x 5V power supply unit 1x User Manual ~ 3 ~... -
Page 5: Panel Descriptions
Panel Descriptions Input Panel — Transmitting Unit HDMI-EXT-0103C-TXIR HDMI IN: Connect to a HDMI source with a HDMI male-male cable IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster Output Panel — Transmitting Unit HDMI-EXT-0103C-TXIR A/V SIGNAL: Plug in a Cat-5/5e/6 cable that needs to be linked to the A/V SIGNAL port of the receiving unit HDMI-EXT-0103C-RXIR CTRL CHANNEL: Plug in a Cat-5/5e/6 cable that needs to be linked to the CTRL CHANNEL port of the... - Page 6 Input Panel — Receiving Unit HDMI-EXT-0103C-RXIR A/V SIGNAL: Plug in a Cat-5/5e/6 cable that needs to be linked to the A/V SIGNAL port of the transmitting unit HDMI-EXT-0103C-TXIR CTRL CHANNEL: Plug in a Cat-5/5e/6 cable that needs to be linked to the CTRL CHANNEL port of the transmitting unit HDMI-EXT-0103C-TXIR.
-
Page 7: Ir Pass-Through
IR Pass-through IR Extenders IR Blaster IR Receiver IR Sockets HDMI-EXT-0103C-TXIR IR Blaster: Plug in the IR blaster here to emit all IR command signals received from the IR receiver to control the HDMI source devices. HDMI-EXT-0103C-RXIR IR Receiver: Plug in the IR receiver here to receive all IR command signals from the IR remote controls of the HDMI source devices. -
Page 8: Supported Ir Data Format
Supported IR Data Format Data Format Suitable Not Recommended TOSHIBA MICOM CODE GRUNDIG CODE SONY 12 BIT CODE SONY 15 BIT CODE SONY 20 BIT CODE RCA CODE RCM CODE MATSUSHITA CODE MITSUBISHI CODE ZENITH CODE JVC CODE M50560-001P MN6125H MN6125L MN6014_C5D7 MN6014-C6D6... -
Page 9: Hardware Installation
Hardware Installation 1. Connect your HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit HDMI-EXT-0103C-TXIR. 2. Connect the IR blaster to the transmitting unit HDMI-EXT-0103C-TXIR, and make the IR blaster directly point to the IR sensor of the HDMI source device(s). 3. - Page 10 Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide EDID information of the DVI or HDMI display. 2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video Signal Generator VG-859C.
- Page 11 ~ 10 ~...
- Page 12 ~ 11 ~...
Need help?
Do you have a question about the HDMI-EXT-0103C-SET and is the answer not in the manual?
Questions and answers