Table of Contents
Advertisement
B. LED indicators
Power LED indicator:
Power Source
Battery Only
Power Adapter
Other LED indicator:
Ethernet LED
USB LED
WiFi LED
C. Installation Steps
Step 1. Install the battery:
Turn OFF the power switch, open the battery lid, and
then insert the Li-ion battery into the battery holder.
DO NOT insert or remove the Li-ion
battery while the power switch is at
ON position.
Step 2.
Close the battery lid
ON/OFF Switch
LED Status
ON
Green in flash
ON
Red
OFF
N/A
ON
Green
ON
Amber
OFF
Amber
OFF
N/A
LED Status
Description
RJ45 cable is plugged, and Ethernet connection
Green
is established.
Green in flash
Data access
Green
3G/3.5G is on
Green in flash
Data access
Green
WLAN is on
Green in flash
Data access
Description
Device ON, and Battery is in use.
Device ON, and Battery is low.
Device OFF
Device ON, and Battery is fully
charged.
Device ON, and Battery is
charging, or no Battery installed.
Device OFF, and Battery is
charging.
Device OFF
6
Advertisement
Table of Contents
