Operation And Maintenance - Huffy 1C4880-A01 Owner's Manual

Style 2 - Push pin
- Put fastener [6] over a spoke [7] and into each
reflector
- Push pin straight into reflector until a "snap" sound is
heard.
Style 3 - One-quarter turn
- Put fastener [6] over a spoke [7] and into each
reflector
- Turn fastener clockwise one-quarter of a turn.

Operation and Maintenance

WARNING
: For your own safety, do not ride the bicycle if the reflectors are incorrectly
installed, damaged, or missing. Make sure the front and rear reflectors are vertical. Do not
allow the visibility of the reflectors to be blocked by clothing or other articles. Dirty reflectors do
not work well. Clean the reflectors, as necessary, with soap and a damp cloth.